Advertisement
Quick Links
Operating
Instructions
STEREO AMPLIFIER
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model
properly. After you have finished reading the instructions, put them away in a safe place for
future reference.
In some countries or regions, the shape of the power plug and power outlet may sometimes
differ from that shown in the explanatory drawings. However, the method of connecting and
operating the unit is the same.
WARNING:
to preveENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
IMPORTANT
NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the
rear panel. Please write this serial number
on your
enclosed warranty card and keep it in a secure area. This
is for your security.
[For Canadian model]
'CAUTION: to prevent ELECTRIC SHOCK DO
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION:
pour prevenir LEs cHocs
ELECTRIQUES EN PAS UTILISER CETTE FICHE
POLARISEE AVEC UN PROLONGATEUR UNE PRISE DE
COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF
SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS
EN LAISSER AUCUNE PARTIE A DECOUVERT.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voitage models are provided with this switch.
U.S., Canadian, European, U.K., and Australian models
are not provided with this switch. Mains voltages in Saudi
Arabia are 127V and 220V only. Never use this model with
110V setting in Saudi Arabia.
The line voltage selector switch is on the rear panel. Before your
model is shipped from the factory, this switch is set to the power
requirements of the destination. Check that it is set properly
before plugging the power cord into the AC wall socket. If the
voltage is not properly set or if you move to an area where the
voltage requirements differ, adjust the selector switch as follows.
1.
Use a medium-size screwdriver.
insert the tip of the screwdriver into the groove on the
voltage selector, and adjust so that the tip of the arrow
points to the voltage level of your area.
@) PIONEER'
The future of sound
and vision.
Advertisement
