Related Manuals for Siemens WG44G2ZG0
Summary of Contents for Siemens WG44G2ZG0
- Page 1 WG44G2ZG0 Washing machine EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Buttons ........ 22 1.1 General information.... 4 9 Programmes ...... 24 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories...... 28 1.4 Safe installation ...... 5 11 Laundry........ 28 1.5 Safe use ........ - Page 3 15 Basic settings...... 32 15.1 Overview of the basic set- tings........ 32 15.2 Changing the basic set- tings........ 32 16 Cleaning and servicing ... 33 16.1 Cleaning the drum.... 33 16.2 Cleaning the detergent drawer........ 33 16.3 Cleaning the drain pump.. 34 17 Troubleshooting...... 37 17.1 Emergency release ....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Connect the appliance to a power supply with alternating cur- ▶ rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in- ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. Do not lift the appliance on your own. ▶ If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. Only stack the dryer on a washing machine using the connec- ▶...
-
Page 7: Safe Use
Safety en Wear protective gloves when installing and transporting the ap- ▶ pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always ▶... - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. ▶ WARNING ‒ Risk of explosion! Laundry that has been pretreated with flammable cleaning agents that contain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its ▶ features. Repairs to the appliance should only be carried out by trained ▶ specialist staff. Only use genuine spare parts when repairing the appliance. ▶... -
Page 10: Preventing Material Damage
en Preventing material damage Make sure that the length of the ▶ Preventing material damage 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be Preventing material damage ATTENTION! able to operate properly. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the tumble mediately if they come into contact dryer afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy... -
Page 12: Installation And Connection
en Installation and connection Replace the accessories in ques- ▶ Installation and connection 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 28 Installation and connection Note: The appliance has undergone 4.1 Unpacking the appliance a function test at the factory. This may cause water stains in the appli- ATTENTION! ance, which the first wash cycle re-... - Page 13 Installation and connection en If the appliance is tilted at an angle 4.4 Removing the transit greater than 40°, residual water may bolts leak out of the appliance and cause material damage. The appliance is secured for trans- Tilt the appliance carefully. portation using transit bolts on the ▶...
-
Page 14: Connecting The Appliance
en Installation and connection Remove the power cable from the Push the 4 cover caps downwards. holder. Note: To install the transit bolts to Remove the 4 sleeves. transport the appliance, perform these steps again in the reverse or- der. 4.5 Connecting the appliance Connecting the water inlet hose WARNING Risk of electric shock! -
Page 15: Aligning The Appliance
Installation and connection en safety regulations, and should in- Water outlet connection types clude a residual current circuit- This information is intended to help breaker. you to connect this appliance to the water outlet. Insert the mains plug of the appli- ance's power cable in a socket ATTENTION! nearby. -
Page 16: Before Using For The First Time
en Before using for the first time To align the appliance, turn the ap- Before using for the first time 5 Before using for the pliance feet. Check that the appli- ance is level using a spirit level. first time Prepare the appliance for use. Before using for the first time 5.1 Starting an empty wash- ing cycle... - Page 17 Before using for the first time en Add washing powder containing oxygen bleach to compartment II. To prevent foaming, use only half of the amount of detergent recom- mended by the detergent manufac- turer for light soiling. Do not use detergent suitable for woollens or delicates.
-
Page 18: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance 6 Familiarising yourself with your appliance Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. -
Page 19: Control Panel
Familiarising yourself with your appliance en Measuring aid for liquid deter- gent → "Inserting the measuring aid", Page 29 Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 6.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. -
Page 20: Display
en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. Program end time → "Buttons", Page 22 Recommendation for the maximum load capacity for the selected program in kg. - Page 21 Display en Display Description Programme status: Spinning Programme status: Programme end Programme status: Steaming Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ¡ ance has been operated. → "Deactivating the childproof lock", Page 32 The crease-reduction function is activated.
-
Page 22: Buttons
en Buttons Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection More information Start/Nachlegen Start Start, cancel or pause the pro- ¡ (Start/Pause) gramme. Cancel ¡ Pause ¡ vario Speed Activate Activate or deactivate a shorter pro- ¡... - Page 23 Buttons en Button Selection More information Kinitterschutz Activate Activate or deactivate the reduced ¡ (Easy iron) creasing programme. Deactivate ¡ In order to reduce creasing in the laundry, the spin cycle and the spin speed are adapted. Note: The laundry has a higher resid- ual moisture after washing.
-
Page 24: Programmes
en Programmes Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Baumwolle Wash hard-wearing items made of cotton, linen or (Cotton) blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate vario Speed. - Page 25 Programmes en Programme Description Max. load (kg) Programme setting: Max. 60 °C ¡ Max. 1400 rpm ¡ Fein/Seide Wash delicate, washable items made from silk, vis- (Fine/Silk) cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag.
- Page 26 en Programmes Programme Description Max. load (kg) Blusen/Hemden Wash non-iron shirts and blouses made from cot- (Shirts) ton, linen, or synthetic or blended fabrics. Tip: In order to avoid creasing in your laundry, you can activate Kinitterschutz. The laundry is only given a short spin and can be removed while still dripping wet.
-
Page 27: Laundry
Programmes en Programme Description Max. load (kg) Trommel Reini- Clean and care for the drum. – Use this programme in the following cases: (Drum Clean) Before using the appliance for the first time ¡ If you regularly wash at temperatures of 40 °C or ¡... -
Page 28: Preparing The Laundry
en Accessories Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 48. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WZ10131 tension or AquaStop (approx. -
Page 29: Detergents And Care
Detergents and care products en If required, adjust the programme Detergents and care products 12 Detergents and care settings. → Page 29 products 13.3 Adjusting the pro- The manufacturer's instructions for Detergents and care products gramme settings use and dosage can be found on the packaging. -
Page 30: Using The Measuring Aid
en Basic operation Press down on the insert and re- Slide the measuring aid forwards. move the detergent drawer. Fold the measuring aid down and Insert the measuring aid. click it into place. 13.6 Using the measuring aid 13.7 Adding detergent and care product To more easily measure the liquid detergent, you can use a measuring Note: Observe the information about... -
Page 31: Adding Laundry
Basic operation en The drum rotates and load detec- 13.11 Resuming the pro- tion takes place. This can take up gramme when the pro- to 2 minutes, after which water gramme status is Rinse enters the drum. The display shows the programme Hold duration or the programme end Requirements... -
Page 32: Childproof Lock
en Childproof lock Childproof lock Basic settings 14 Childproof lock 15 Basic settings Secure your appliance against being You can configure the basic settings Childproof lock Basic settings operated unintentionally using the for your appliance to meet your controls. needs. 14.1 Activating the childproof 15.1 Overview of the basic lock settings... -
Page 33: Cleaning And Servicing
Cleaning and servicing en Press Schleudern and, at the 16.2 Cleaning the detergent same time, turn the programme drawer selector to position 2. Pull out the detergent drawer. The display shows the current value. Press down on the insert and re- move the detergent drawer. Use the programme selector to se- lect the required basic setting. -
Page 34: Cleaning The Drain Pump
en Cleaning and servicing Fit the insert and click it into place. Open and remove the mainten- ance flap. Clean the opening for the deter- gent drawer. Slide a sufficiently large container under the opening. Push in the detergent drawer. Take the drain hose out of the holder. - Page 35 Cleaning and servicing en Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 34 hot. Since water may remain in the Do not touch the hot detergent ▶...
- Page 36 en Cleaning and servicing Insert the pump cap. Before the next wash Ensure that the parts of the To prevent unused detergent from ‒ pump cap are correctly as- flowing straight into the outlet in the sembled. next wash, run a suitable programme for draining after you have emptied the drain pump.
-
Page 37: Troubleshooting
Troubleshooting en Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. ▶... - Page 38 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
- Page 39 Troubleshooting en Fault Cause and troubleshooting "E:35 / -10" Call the after-sales service. ▶ → "Customer Service", Page 48 flashes. The automatic voltage control system detects an un- authorised voltage drop. No remedial action possible. ▶ Note: If the power supply is stable, the programme continues to run as normal.
- Page 40 en Troubleshooting Fault Cause and troubleshooting All other error codes. Malfunction Switch the appliance off and then on again. If the message appears again, disconnect the appli- ance from the power supply for at least 30 seconds by pulling out the plug or by switching off the relev- ant circuit breaker in the fuse box.
- Page 41 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Drain pipe or water outlet hose is blocked. ing. Clean the drain pipe and the water outlet hose. ▶ Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are ▶...
- Page 42 en Troubleshooting Fault Cause and troubleshooting The spin cycle runs The unbalanced load detection system eliminates an several times. imbalance by repeatedly redistributing the laundry. Not a fault – no action required. ▶ Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
- Page 43 Troubleshooting en Fault Cause and troubleshooting Heavy foam build-up Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
- Page 44 en Troubleshooting Fault Cause and troubleshooting Loud noises during Secure the appliance feet. ▶ the spin cycle. → "Aligning the appliance", Page 15 Transit bolts have not been removed. → "Removing the transit bolts", Page 13. ▶ Banging noises, rat- Foreign bodies have got into the drain pump. tling in the drain → "Cleaning the drain pump", Page 34.
- Page 45 Troubleshooting en Fault Cause and troubleshooting The spin result is not Note: Where possible, mix large and small items in satisfactory. The laun- the drum. Different sized items of laundry distribute dry is too wet/too themselves better during the spin cycle. damp. Start the Schleudern programme.
- Page 46 en Troubleshooting Fault Cause and troubleshooting Fabric softener re- The use of fabric softener is not supported for the se- mains in the detergent lected programme. drawer. Before washing, check whether the use of fabric ▶ softener is supported for the selected programme. → "Programmes", Page 24 Water is leaking from Dirt on the door or seal causes leaks.
-
Page 47: Emergency Release
Transportation, storage and disposal en 17.1 Emergency release 18.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 34 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 48: Disposing Of Old Appliance
en Customer Service 18.4 Disposing of old appli- Customer Service 19 Customer Service ance Function-relevant genuine spare parts Customer Service Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 49: Aqua-Stop Guarantee
Customer Service en 19.2 AQUA-STOP guarantee In addition to warranty claims against the seller under the purchase agree- ment and in addition to our manufac- turer's warranty, we offer compensa- tion under the following conditions. If our Aqua-Stop system is defect- ¡ ive and causes water damage, we will make good the damage for private users. - Page 50 en Consumption values Consumption values 20 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456.
-
Page 51: Technical Data
Technical data en Mains voltage 220-240 V, 50 Hz Minimum in- 10 A stallation protec- tion Nominal power 2300 W Power consump- Off mode: ¡ tion 0.15 W Left-on mode: ¡ 0.50 W Water pressure Minimum: ¡ 100 kPa (1 bar) Maximum: ¡ 1000 kPa (10 bar) Length of the wa- 150 cm ter inlet hose Length of the wa-... - Page 52 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...