Table of Contents
Advertisement
Fault
Remnants of food on
tableware.
Removable streaks
are present on
glasses, glassware
with a metallic appear-
ance and cutlery.
Cause and troubleshooting
Filters are inserted incorrectly and/or not engaged.
Insert the filters properly.
1.
→ "Filter system", Page 39
Engage the filters.
2.
Washing programme selected too weak.
Select a more intensive washing programme.
▶
→ "Programmes", Page 17
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Only remove large remnants of food and do not
▶
prerinse tableware.
Tall narrow receptacles in corner areas are not rinsed
adequately.
Do not position tall narrow receptacles at too great
▶
an angle or in corner areas.
Top baskets on right and left are not set to same
height.
Set the upper basket on the left and right to the
▶
same height.
→ "Top basket", Page 20
Amount of rinse aid to be dispensed is set too high.
Set the rinse aid system to a lower setting.
▶
→ "Setting the amount of rinse aid", Page 25
No rinse aid has been added.
Add rinse aid.
▶
→ "Adding rinse aid", Page 25
Detergent residue is present in the final rinse. Lid of
the detergent dispenser is blocked by tableware items
and will not open fully.
Arrange tableware in the top basket tableware so
1.
the tab collecting tray is not obstructed by table-
ware.
→ "Arrange tableware", Page 29
Items of tableware are blocking the dispenser lid.
Troubleshooting en
45
Advertisement
Table of Contents
