Miele PDR 514 Operating And Installation Instructions
Commercial tumble dryers
Hide thumbs
Also See for PDR 514:
- Quick start manual (156 pages) ,
- Operating and installation instructions (56 pages) ,
- Quick start manual (146 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Miele PDR 514
Summary of Contents for Miele PDR 514
- Page 1 Operating and installation instructions Commercial tumble dryers PDR 514/518/522/528/544 To avoid the risk of accidents or damage to the en-GB machine, it is essential to read these instruc- tions before it is installed and used for the first time. M.-Nr. 11 865 060...
-
Page 2: Caring For The Environment
Caring for the environment Disposal of the packing material The packaging is designed to protect the appliance from damage dur- ing transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the man- ufacturing process and also reduces the amount of waste in landfill sites. -
Page 3: Table Of Contents
Contents Caring for the environment ......................Warning and Safety instructions ..................... Appropriate use ..........................Foreseeable misuse ........................Technical safety ..........................Gas-heated tumble dryers ...................... Correct use............................. Accessories ............................ Description of the machine ....................... 10 Operating the tumble dryer ....................... 11 Machines with residual moisture control (ROP) .............. - Page 4 Contents Quitting programming mode ....................... 34 Cleaning and care ........................35 Cleaning the fluff filter ........................35 Additional annual cleaning ......................36 Problem solving guide......................... 37 Fault diagnosis ..........................37 Customer Service Department....................39 Contact in case of malfunction ....................39 Optional accessories ........................
-
Page 5: Warning And Safety Instructions
If using, do so at your own risk, and follow the instructions provided on the packaging. Any other applications may be dangerous. Miele cannot be held liable for dam- age resulting from incorrect or improper use or operation. -
Page 6: Foreseeable Misuse
Warning and Safety instructions Foreseeable misuse Do not make any alterations to the tumble dryer, unless authorised to do so by Miele. Do not lean on the tumble-dryer door. Otherwise, the tumble dryer may tip over, causing injury to yourself or others. - Page 7 Ensure that no closeable door, sliding door or an oppositely hinged door is installed that would hinder the drum door being opened in any way. If the mains connection cable is faulty it must always be replaced by a Miele authorised technician to protect the user from danger.
-
Page 8: Gas-Heated Tumble Dryers
Warning and Safety instructions Gas-heated tumble dryers In the event of a fault or when carrying out cleaning and maintenance, the on-site manual gas shut-off valve and the shut-off device on the gas meter must be closed. Before completing commissioning, maintenance, conversion and repair work, all gas- ... -
Page 9: Accessories
Aggressive vapours containing chlorine can also be corrosive. Do not store containers of these agents near the tumble dryer. Accessories Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated. -
Page 10: Description Of The Machine
Description of the machine ① ⑤ ⑨ ⑥ ⑩ ② ⑦ ③ ⑧ ④ Control panel with rotary control Door Fluff filter flap 4 height-adjustable screw feet Electrical connection Communication module slot Intake vents for drying air Exhaust duct Connection for communication box Communication box (optional) For setting up a connection with external systems... -
Page 11: Operating The Tumble Dryer
Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. bed linen and cloths. The function is deactivated as a factory default setting and can only be activated and set by the Miele Customer Service Department. Time display Displays the remaining programme running time in hours and minutes. -
Page 12: Drying Programmes
Operating the tumble dryer Drying programmes - position = “Cottons” programme For drying cotton and linen fabrics. - position = “Cottons Low temperature” programme For drying delicate cotton and linen fabrics. - position = “Synthetics/Delicates” programme For drying synthetic fibres and artificial silk to 20 % residual moisture. - ... -
Page 13: Machines With Time Control (Top)
Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. bed linen and cloths. The function is deactivated as a factory default setting and can only be activated and set by the Miele Customer Service Department. Time display Displays the remaining programme running time in hours and minutes. -
Page 14: Timed Programmes
Operating the tumble dryer Timed programmes - 5 position = Timed drying: 05 minutes - 10–55 position = Timed drying: 10–55 minutes - 60 position = Timed drying: 60 minutes - position = machine off... -
Page 15: Machines With Payment Systems (Cop)
Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. bed linen and cloths. The function is deactivated as a factory default setting and can only be activated and set by the Miele Customer Service Department. Time display Displays the remaining programme running time in hours and minutes. - Page 16 Operating the tumble dryer - position range = “high” temperature setting For drying cotton and linen fabrics. - position = machine off...
-
Page 17: How The Control Field Works
Operating the tumble dryer How the control field works The sensor controls react to fingertip contact. If a sensor control is lit, it can be selected. If a sensor control is brightly lit, this means it is currently selected. If a sensor control is dimly lit, this means it can be selected. Sensor controls for the drying levels After selecting a drying level programme with the programme selector, the recommended drying level lights up. -
Page 18: Initial Commissioning
Some settings can only be modified during the initial commissioning process. After that, they can only be changed by the Miele Customer Service Department. -
Page 19: Drying
Drying 1. Notes on correct laundry care Washing before Heavily soiled laundry must be washed particularly thoroughly. Use drying sufficient detergent and select a high wash temperature. If in doubt, wash the items several times. The tumble dryer must not be used for drying items of laundry which have been cleaned using industrial chemicals. -
Page 20: Selecting A Programme
Drying Open the door. Load the washed laundry into the tumble dryer. Do not overload the drum. Overloading the drum will cause unnecessary wear and tear to the laundry and affect the drying results. This can also increase the creasing in the laundry. -
Page 21: Selecting The Delay Start Function
Drying Warm air You can set the duration in one-minute increments from minutes to hours. Touch the or sensor control repeatedly until the required pro- gramme running time appears in the time display. The drying result is preset by the tumble dryer and cannot be altered. Selecting the With Delay start, you can delay the start of a programme from Delay start func-... - Page 22 Drying The Start/Stop sensor control will light up. Programme sequence - If Delay start has been selected, the Delay start time will start to count down first. - The programme starts. Programme run- The programme running time depends on the quantity of laundry, the ning time/Time left type of fabric and the residual moisture in the laundry.
-
Page 23: Unloading Laundry From The Tumble Dryer
Drying 5. Unloading laundry from the tumble dryer End of the pro- The tumble dryer can be configured so that a buzzer sounds at the gramme end of the programme. At the end of the programme ( is indicated on the time display), the laundry has cooled down and can be removed. -
Page 24: Changing The Programme Sequence
Changing the programme sequence Changing a programme once it has started You cannot change to another programme once a programme has started (this prevents unintentional alterations). You will need to can- cel the current programme before you can select a new one. ... -
Page 25: Time Left
Changing the programme sequence Time left Altering the programme sequence can cause the programme duration shown in the display to be adjusted. -
Page 26: Supervisor Level (Programming Mode)
Supervisor level (programming mode) Requirements for accessing supervisor level - The appliance is switched on. - The appliance door is open. Accessing supervisor level Touch and hold the Start/Stop sensor control and close the door. The Start/Stop sensor control flashes rapidly for 2 seconds. Continue touching the Start/Stop sensor control for at least 4 seconds. - Page 27 Supervisor level (programming mode) Pro- Designation Possible set Standard Explanation gramme value setting Cottons & Timed operation internal/ex- – See “Pauses” table ternal 1 Drum drive pause Cottons & Timed operation internal/ex- – See “Heater bank temperature” table ternal 2 Heater bank temperature ...
- Page 28 Supervisor level (programming mode) Pro- Designation Possible set Standard Explanation gramme value setting – See table “Reversing cycle” Label Drum drive primary direction – See table “Reversing cycle” Label Drum drive reverse direction – See “Pauses”...
- Page 29 Supervisor level (programming mode) Pro- Designation Possible set Standard Explanation gramme value setting – See table “Reversing cycle” Minimum iron Drive running time in primary direction – See table “Reversing cycle” Minimum iron Drive running time in reverse direction See “Pauses”...
- Page 30 Supervisor level (programming mode) Pro- Designation Possible set Standard Explanation gramme value setting = Off = On after 10 minutes, not during programme in operation = On after 10 minutes Display off status = On after 30 minutes, not during programme in operation = On after 30 minutes ...
-
Page 31: Heater Bank Temperature
Supervisor level (programming mode) Pro- Designation Possible set Standard Explanation gramme value setting = Off = programme cancelled when door is opened Door opening status = On = programme interrupted when door is opened = Off ... -
Page 32: Process Air Temperature
Supervisor level (programming mode) Process air temperature Set value in the display Temperature Cold 30 °C/86 °F 31 °C/88 °F 32 °C/90 °F 33 °C/91 °F 34 °C/93 °F 35 °C/95 °F 36 °C/97 °F 37 °C/99 °F 38 °C/100 °F 39 °C/102 °F 40 °C/104 °F 41 °C/106 °F 42 °C/108 °F ... -
Page 33: Reversing Cycle
Supervisor level (programming mode) Set value in the display Temperature 72 °C/162 °F 73 °C/163 °F 74 °C/165 °F 75 °C/167 °F Reversing cycle Set value in the display Seconds 20 s 22 s 24 s 26 s 28 s 30 s 32 s ... -
Page 34: Pauses
Supervisor level (programming mode) Set value in the display Seconds 94 s 96 s 98 s 100 s 102 s 104 s 106 s 108 s 110 s 112 s 114 s 116 s 118 s 120 s Pauses Set value in the display Seconds ... -
Page 35: Cleaning And Care
Cleaning and care Cleaning the fluff filter Risk of fire if the tumble dryer is operated without a fluff filter. If there is no fluff filter, the air channels, heating elements and vent ducting can become clogged during drying and may catch fire. The fluff filter must not be removed for cleaning. -
Page 36: Additional Annual Cleaning
In the case of elec- trically heated tumble dryers, the heater bank and the heating shaft must also be checked by the Miele Customer Service Department. In the case of gas-heated dryers, the burner and the burner area must be... -
Page 37: Problem Solving Guide
Problem solving guide Fault diagnosis Message Cause and remedy The display remains dark. There is no power to the tumble dryer. Check the mains plug, main switch and fuses (on site). Problem Cause and remedy The efficiency of the tumble The fluff filter in the tumble dryer is dirty. - Page 38 Problem solving guide Problem Cause and remedy Check and clean all components in the vent ducting (e.g. wall pipe, external grille, bends, elbows, etc.). The flow of air is insufficient (e.g. because it is installed in a small room). When drying, open a door or window to ensure sufficient ...
-
Page 39: Customer Service Department
Customer Service Department Contact in case of malfunction In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or Miele Service. Contact information for Miele Service can be found at the end of this document. -
Page 40: Installation
Incorrect installation of the tumble dryer can lead to personal injury or damage to prop- erty. The tumble dryer must only be installed and commissioned by Miele Customer Service Department or an authorised dealer. The tumble dryer must be installed in accordance with all relevant regulations and stand- ... - Page 41 Installation PDR 514/518/522/914/918/922 PDR 528/544/928/944 1400 mm 1640 mm 906 mm 1206 mm PDR 514/914: 852 mm PDR 528/928: 1018 mm PDR 518/918: 1035 mm PDR 544/944: 1384 mm PDR 522/922: 1164 mm To facilitate any future maintenance work, a maintenance corridor with a width of at least 500 mm must be set up behind the machine and must be accessible at all times. The dis- tance between the machine and any walls must not fall below the specified minimum val- ues.
-
Page 42: Securing The Machine
ted for connection to the relevant input voltage. This conversion must be performed by the Miele Customer Service Department or by an authorised dealer. During the conversion, the wiring instructions given on the wiring diagram must be followed. Tip: We recommend connecting the tumble dryer to the power supply via a plug and socket so that it is easier to conduct electrical safety checks (e.g. -
Page 43: Air Intake/Exhaust Air
If the gas type needs to be changed, please request the appropriate conversion kit from the Miele Customer Service Department. Information is required on the appliance type, serial number, gas family, gas group, gas connection pressure and country of installation. This gas... - Page 44 Installation Risk of electric shock and injury due to using the tumble dryer without the complete casing. If the casing is dismantled, it is possible to come into contact with live or rotating ma- chine parts. Once the tumble dryer has been installed, replace all the casing parts that were removed.
-
Page 45: Connectivity
Press and hold the sensor control until appears briefly on the display. A timer will then start. The tumble dryer now opens the soft AP for 10 minutes. Establish the connection with the Device Connector in Miele MOVE. Once a connection is established, dots flash in the word. - Page 46 Connectivity Establishing the network connection using a LAN cable The optional XKM 3200 WL PLT communication module is required for wired network connection. On the supervisor level, select using the or arrow buttons. Then select the COM module using the or arrow buttons. ...
-
Page 47: Terms In Network Technology
DHCP Dynamic Host Configuration Protocol Enables the automatic assignment of IP addresses by a DHCP server (integrated in the router) to all devices in the network (e.g. computers, printers, Miele appliances). The individual devices must be configured for DHCP. dLAN direct Local Area Network Data transmission via the electrical cables in a building. - Page 48 Addresses all queries and responses to all appliances in the network that support this service and report with an identical name. Warning! This service must be explicitly permitted in many routers. Miele appliances can only ex- change information with each other when this service has been permitted.
- Page 49 Wireless Fidelity Brand name used for WiFi-enabled or certified devices. Often used synonymously with WLAN. The term WLAN is only really used in German-speaking countries. WiFi is international. Miele has also been a member of the WiFi Alliance since 01.01.2019.
- Page 50 Connectivity WiFi Wireless Local Area Network Wireless data transmission in a network WiFi 802.11b Wireless network: 2.4 GHz Data transfer: 11 Mbit/s – corresponds to ap- prox. 1.4 MB/s in practice WiFi 802.11g Wireless network: 2.4 GHz Data transfer: 54 Mbit/s – corresponds to ap- prox.
- Page 51 Connectivity Printer = 192.168.1.3 Smartphone = 192.168.1.4 Notebook = 192.168.1.5 Washing machine = 192.168.1.6 The router automatically gives each device an IP address (DHCP). The IP addresses allow data to be transmitted to specific locations via the router.
-
Page 52: Optional Accessories
In addition, it can display detailed machine and programme status information. This module forms the basis for wired communication with Miele MOVE. It is not possible to integrate the machine into the “Miele@home” app for domestic in- stallations. The communication module is intended exclusively for commercial use and is supplied with mains voltage directly via the Miele Professional machine. -
Page 53: Payment Systems
Payment systems This tumble dryer can be fitted with a payment system (optional Miele accessory). In this case, a Miele Customer Service technician must programme the relevant settings in the tumble dryer’s electronics and connect the payment system. -
Page 54: Technical Data
UK declaration of conformity UKCA mark (UK only) The Supply of Machinery (Safety) Regulations 2008 This Statement of Compliance confirms this Miele product fully complies with the Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. - Page 56 Tel: (01) 461 07 10, Fax: (01) 461 07 97 E-Mail: info@miele.ae E-Mail: info@miele.ie, Internet: www.miele.ie Website: www.miele.ae Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany Alteration rights reserved / Publication date: 16.24 M.-Nr. 11 865 060 / 02 ...