Table of Contents
Advertisement
en Basic operation
14.2 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
Press the programme button re-
▶
peatedly until the right programme
has been selected.
The programme is set and the LED
a
flashes.
14.3 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
Press the button for the relevant
▶
additional function.
→ "Additional functions", Page 19
The additional function is set and
a
the additional function button
flashes.
14.4 Setting timer
programming
You can delay the start of the pro-
gramme by 3, 6 or 9 hours.
Press
repeatedly until the relev-
1.
ant display lights up.
To activate timer programming,
2.
press
.
Note: To deactivate timer program-
ming, press
of the displays 3h, 6h or 9h light up.
14.5 Starting the programme
Press
.
▶
1
Depending on the appliance specifications
32
1
repeatedly until none
While the programme is running, a
a
spot of light is projected onto the
floor below the appliance door.
This light will not be visible if the
appliance is installed at eye level
with the cabinet front fitted flush.
The programme has ended when
a
no indicators on the controls light
up.
The programme has ended when
a
the spot of light is no longer visible
on the floor.
Notes
If you want to add more tableware
¡
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
You can only change a pro-
¡
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 33
The appliance switches off auto-
¡
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
14.6 Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Open the appliance door carefully.
1.
Press
.
2.
The programme is saved and the
a
appliance switches off.
Advertisement
Table of Contents
