Cisco UCS C Series Installing Manual page 5

Hide thumbs Also See for UCS C Series:

Table of Contents

Installing the Server

Figure 1: Front Securing Mechanism, Inside of Front End

Front mounting pegs

Rack post between mounting pegs and opened

securing plate

Step 3

Install the outer slide rails into the rack:

a) Align one slide-rail assembly front end with the front rack-post holes that you want to use.

The slide rail front-end wraps around the outside of the rack post and the mounting pegs enter the rack-post holes

from the outside-front. See

Note

b) Push the mounting pegs into the rack-post holes from the outside-front.

c) Press the securing plate release button, marked PUSH. The spring-loaded securing plate closes to lock the pegs in

place.

d) Adjust the slide-rail length, and then push the rear mounting pegs into the corresponding rear rack-post holes. The

slide rail must be level front-to-rear.

The rear mounting pegs enter the rear rack-post holes from the inside of the rack post.

e) Attach the second slide-rail assembly to the opposite side of the rack. Ensure that the two slide-rail assemblies are at

the same height and are level front-to-back.

f) Pull the inner slide rails on each assembly out toward the rack front until they hit the internal stops and lock in place.

Step 4

Insert the server into the slide rails:

Caution

This server can weigh up to 64 pounds (29 kilograms) when fully loaded with components. We recommend

that you use a minimum of two people or a mechanical lift when lifting the server. Attempting this procedure

alone could result in personal injury or equipment damage.

a) Align the rear ends of the inner rails that are attached to the server sides with the front ends of the empty slide rails

on the rack.

Figure 1: Front Securing Mechanism, Inside of Front End, on page

The rack post must be between the mounting pegs and the open securing plate.

Securing plate shown pulled back to the open position

Installing the Server

Installing the Server in a Rack

Table of Contents

Ucsc-rail-d Ucsc-cma-c220-d