Table of Contents
Advertisement
en Basic settings
Basic settings
15 Basic settings
You can configure the basic settings for your appliance to meet your needs.
Basic settings
15.1 Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid dis-
pensing
Intensive drying
Hot water
1
Factory setting (may vary according to model)
34
Display text Selection
1
H04
H00 - H07
1
r05
r00 - r06
1
d00
d00 - d01
1
A00
A00 - A01
Description
Set the water softening sys-
tem to your water hardness.
→ "Setting the water soften-
ing system", Page 23
Level H00 switches the wa-
ter softening system off.
Set the amount of rinse aid
to be dispensed.
Switch the rinse aid system
off with level r00.
The temperature is in-
creased during the final
rinse, which improves the
drying result. This may in-
crease the run time slightly.
Note: Not suitable for delic-
ate items of tableware.
Switch Extra Dry on "d01" or
off "d00".
Set cold water or hot water
connection. Only set the ap-
pliance to hot water if this
can be prepared with little
energy and a suitable install-
ation is available, e.g. solar
heating system with circula-
tion line. The water temperat-
ure should be at least 40 °C
and max. 60 °C.
Switch hot water on "A01" or
off "A00".
Advertisement
Table of Contents
