Table of Contents
Advertisement
3.
Remove the fingerprint reader board (4) from the computer.
To install the fingerprint reader board, reverse this procedure.
Fan
To remove the fan, use this procedure and illustration.
Table 8-4
Fan description and part number
Description
Fan
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the fan assembly:
1.
Disconnect the fan cable from the system board connector (1).
2.
Remove camera cable from the clip (2) on the fan.
3.
Remove the three Phillips 2.0 × 4.0 screws (3) that secure the fan to the computer.
78
Chapter 8 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
62).
Spare part number
N96441-001
Battery on page
74).
62).
Advertisement
Table of Contents
