READ ALL INSTRUCTIONS BEFORE USE............3 WARNING ......................3 CAUTION ......................7 INSTALLATION Product Overview....................9 Installation ......................10 OPERATION Introduction to Induction Cooking ..............14 Cookware ......................14 Using the Hob Elements..................16 SMART FUNCTIONS LG ThinQ Application ..................23 MAINTENANCE Care and Cleaning....................25 TROUBLESHOOTING Before Calling for Service................27...
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. Safety Messages This symbol is displayed to indicate matters and operations that can cause risk.
Page 4
SAFETY INSTRUCTIONS • Alterations to the domestic wiring system must only be made by a qualified electrician. • In order to avoid a hazard, this appliance must be installed according to these instructions for installation. • This appliance is to be properly installed and earthed only by a suitably qualified person.
Page 5
SAFETY INSTRUCTIONS • Do not let your body, clothing or any item other than suitable cookware contact the glass until the surface is cool. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. •...
Page 6
SAFETY INSTRUCTIONS • Children less than 8 years of age shall be kept away unless continuously supervised. • Keep the appliance and its cord out of reach of children less than 8 years. • Keep pets away from the product to avoid risk of fire or burns. Do not allow pets to climb on the product even when it is not in operation.
SAFETY INSTRUCTIONS CAUTION CAUTION • To reduce the risk of injury to persons, malfunction, or damage to the product or property when using the appliance, follow basic safety precautions, including the following: Installation • Take care - panel edges are sharp. •...
Page 8
SAFETY INSTRUCTIONS - by clients in hotels, motels and other residential type environments - bed and breakfast type environments. • The appliance is not intended to be operated by means of an external timer or separate remote-control system. This does not apply if operation with appliances included in EN 50615 is switched off.
INSTALLATION INSTALLATION Product Overview Parts and Features BCI607B4BG BCI607T4BG BCI607B4BG BCI607T4BG Max. 2200/3300 W Zone Max. 2200/3300 W Zone Max. 2200/3300 W Zone Max. 1400/2000 W Zone Max. 2200/3300 W Zone Max. 3300/3700 W Zone Glass Plate Control Panel Accessories...
INSTALLATION BCI607T4BG NOTE Model BCI607B4BG • The safety distance between the sides of the hob Supply Voltage 220-240 V~ 50/60 Hz and the inner surfaces of the worktop should 380-415 V 3N~ 50/60 be at least 3 mm. Maximum Connected...
Page 11
INSTALLATION maintained between the cooktop hob and the Drawer range hood above it. Refer to Rangehood manufacturers clearance instructions Min. 15 mm Min. 20 mm Oven Air intake Air exit 5 mm Min. 10 mm WARNING • Ensuring Adequate Ventilation Make sure the hob is well ventilated and that air inlet and outlet are not blocked.
Page 12
INSTALLATION After Installing the Hob WARNING • Maker sure that the power cord is not accessible • The rear wall, adjacent and surrounding surfaces through cupboard doors or drawers. must therefore be able to withstand a • Make sure that there is adequate flow of fresh air temperature of 90 ℃.
Page 13
• If the power cord is damaged or needs to be • The power supply cable sections can withstand replaced, contact an LG Electronics Customer the load specified on the rating plate. Information Centre. Connect the hob to the mains power supply. Do not •...
OPERATION OPERATION Introduction to Induction Cookware Cooking Choosing the Right Cookware CAUTION NOTE • People with a heart pace maker should consult • When purchasing cookware for use on the with their doctor before using this unit. induction hob, look for cookware identified by the manufacturer as "induction ready"...
Page 15
OPERATION undetected by the hob. Always centre your cookware on the cooking zone. Cookware placement in flexible zones • Always lift cookware directly off the Induction hob. Detection of Small Articles When an unsuitable size or non-magnetic cookware (e.g. aluminium), or some other small item (e.g.
OPERATION Using the Hob Elements Using the Control Panel Control Panel BCI607B4BG BCI607T4BG ON/OFF Button Flexible Zone Button Power Control Timer Button Pause Button Keylock Button Hood Connection Button Wi-Fi Connection Button Power Setting Display +/- Buttons Timer Indicator Timer display Using the Cooking Zones •...
Page 17
OPERATION • A fan noise is also normal to be heard when the Place suitable cookware on the cooking zone Hob's electronics become hot during and that you wish to use. cooking. • Make sure the bottom of the cookware and the surface of the cooking zone are clean and dry.
Page 18
OPERATION sliding the slider to ”0”. Make sure the display • If the previous selected setting was level 0, after shows “0”. automatically switch off of the boost function power setting 15 will set. • Under certain conditions, the boost function may automatically switch off to protect the electronic components inside the hob.
Page 19
OPERATION Using the Flexible Zone Using the Timer • You can set it to turn one or more cooking zones NOTE off after the set time is up. The maximum setting time is 99 minutes. • If one of the two cooking zones in the flexible zone is on, cancel the cooking zone operation Setting the timer to turn one or more cooking and use the flexible function.
Page 20
OPERATION • When the buttons are locked, all buttons are When cooking timer expires, the disabled. corresponding cooking zone will be switched To lock the buttons off automatically. Press the Keylock button for 3 seconds. NOTE The timer display shows "Lo" and the timing •...
Page 21
Press the Pause button to return the cooking • This product features a Wi-Fi device that you can zone to the previous power setting. use to connect the hob to LG hoods. Through the Wi-Fi connection, you can use the hood NOTE connection on the LG ThinQ application.
Page 22
OPERATION Press the lower left boost button to enter the power limit mode. Press the keylock button repeatedly to select maximum connected load power. Display Maximum power 2500 W 3500 W 4500 W 6000 W 7400 W Press the ON/OFF button to confirm the current power of the hob and exit the power limit mode.
• If you change your wireless router, Internet service provider, or password, delete the Run the LG ThinQ application and sign in with registered appliance from the LG ThinQ application and register it again. your existing account or create an LG account to sign in.
Page 24
SMART FUNCTIONS RF Radiation Exposure NOTE Statement • LG ThinQ is not responsible for any network This equipment shall be installed and used at a connection problems or any faults, malfunctions, or errors caused by network minimum distance of 20 cm from the human body.
MAINTENANCE MAINTENANCE Care and Cleaning Hold the blade or utensil at a 30° angle and slowly scrape the soiling or spill to a cool area Cleaning the Appliance of the hob. Using the blade incorrectly or improperly can scratch the hob's surface. CAUTION •...
Page 26
MAINTENANCE NOTE • The hob may beep and turn itself off, and the control panel may not function while there is liquid on them. Make sure that you wipe the control panel area dry before turning the hob back on.
Repairs should be performed by a licensed technician only. Improper repair may result in considerable danger to you and others. However, some minor problems can be resolved as in the table below: If a problem is not solved, please contact an LG Electronics Customer Information Centre. Parts and Features Symptoms Possible Cause &...
Page 28
TROUBLESHOOTING Symptoms Possible Cause & Solution Cookware do not The induction hob cannot detect the cookware because it is too small for become hot and "u" the cooking zone or not properly centred on it. appears in the display. • Centre the cookware and make sure that its base matches the size of the cooking zone.
Page 29
TROUBLESHOOTING Symptoms Possible Cause & Solution High temperature of IGBT. (1#) • This is normal. Problems can be resolved as follows. • Wait for the temperature of the IGBT return to normal. Press the ON/OFF button to restart unit. Check whether the fan runs smoothly; if not, call for service.
Page 30
• Find the Wi-Fi network connected to your smartphone and remove it, then not connected to the register your appliance on LG ThinQ. Wi-Fi network. Mobile data for your smartphone is turned on. • Turn off the Mobile data of your smartphone and register the appliance using the Wi-Fi network.