hit counter script
Toro 79390 Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower Accessories
  5. 79390
  6. Operator's manual

Toro 79390 Operator's Manual

32in bagger zero-turn-radius riding mower
Hide thumbs Also See for 79390:
Table of Contents

Advertisement

Quick Links

Download this manual
32in Bagger
Zero-Turn-Radius Riding Mower
Model No. 79390-Serial No. 316000001 and Up
Model No. 79414-Serial No. 400000000 and Up

Introduction

Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Whenever you need service, genuine parts, or
additional information, contact an Authorized Service
Dealer or Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2019-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Figure 1
Register at www.Toro.com.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Introduction ............................................................... 1
Safety ....................................................................... 2
Towing Safety ..................................................... 2
Safety and Instructional Decals .......................... 3
Setup ........................................................................ 4
1 Installing the Weight......................................... 5
2 Installing the Attachment Mount ....................... 7
3 Installing the Latch Rod.................................... 8
4 Assembling the Bagger Top ............................. 9
5 Installing the Bagger Top................................ 10
6 Installing the Chute .........................................11
8 Installing the Deck Ring ................................. 13
g005673
9 Installing the Blade......................................... 14
Operation ................................................................ 14
Emptying the Grass Bags ................................. 14
Removing the Bagger ....................................... 15
Using the Draw Bar........................................... 16
Operating Tips ................................................. 16
Maintenance ........................................................... 18
Inspecting the Bagger Attachment .................... 18
Inspecting the Mower Blades ............................ 19
Cleaning the Bagger Attachment ...................... 19
Storage ................................................................... 19
Storing the Bagger Attachment ......................... 19
Original Instructions (EN)
Form No. 3434-860 Rev A
Operator's Manual
Figure 2
All Rights Reserved *3434-860* A
Printed in the USA
g000502

Advertisement

Table of Contents
loading

Related Manuals for Toro 79390

Summary of Contents for Toro 79390

  • Page 1: Table Of Contents

    Form No. 3434-860 Rev A 32in Bagger Zero-Turn-Radius Riding Mower Model No. 79390—Serial No. 316000001 and Up Model No. 79414—Serial No. 400000000 and Up Operator's Manual Introduction g000502 Read this information carefully to learn how to operate Figure 2 and maintain your product properly and to avoid 1.

  • Page 2: Safety

    Towing Safety Safety • Do not attach towed equipment except at the hitch • Become familiar with the safe operation of the point. equipment, with the operator controls, and safety • Follow the attachment manufacturer's signs. recommendation for weight limits for towed •...

  • Page 3: Safety And Instructional Decals

    Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal109-6809 109-6809 1. Crushing hazard of hand—do not remove the whole bagger from the machine; open the bagger top and then remove the bag(s) from the bagger.

  • Page 4: Setup

    Setup Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. Bolt (3/8 x 1-1/4 inches) Locknut (3/8 inch) Left weight mounting bracket Right weight mounting bracket Washers Install the weight. Weight bracket Bolt (3/8 x 1 inch) Flat weight Suitcase weight...

  • Page 5: Installing The Weight

    Installing the Weight Parts needed for this procedure: Bolt (3/8 x 1-1/4 inches) Locknut (3/8 inch) Left weight mounting bracket Right weight mounting bracket g014875 Figure 3 Washers Weight bracket 1. Front-right caster (castor 3. Bolt (3/8 x 1 inch) fork and wheel not shown Bolt (3/8 x 1 inch) for clarity)
  • Page 6 Note: For machines with a foot-assist lift pedal, the washers are not used. • For machines with a foot-assist lift pedal, Remove the forward fasteners in the foot assist lift pedal bracket and secure the bracket using 2 bolts and 2 locknuts (Figure Note: Use 1 locknut from loose parts and 1...

  • Page 7: Installing The Attachment Mount

    Install a suitcase weight in front of the flat weight (Figure Secure the weights to the weight bracket with a keyed-cross bar (Figure 9). Install the bar and rotate it 90 degrees downward to lock it in place. Once all the weights and brackets have been installed, check that all the fasteners are tight.
  • Page 8 g030494 Figure 10 1. Carriage bolt (5/16 x 3/4 2. Locknut (5/16 inch) g028174 Figure 12 inch) Install the pivot frame to the machine frame as Install the bent, flared end of a rod into the keyed shown in Figure 11.

  • Page 9: Installing The Latch Rod

    Installing the Latch Rod Assembling the Bagger Top Parts needed for this procedure: Parts needed for this procedure: Latch rod Bagger top Hairpin cotter Bagger screen Procedure Procedure Turn the bagger top over. Install the latch rod with a hairpin cotter (Figure 14).

  • Page 10: Installing The Bagger Top

    Installing the Bagger Top Parts needed for this procedure: Grass Bag Upper bagger tube Procedure Install the bagger top to the bagger frame. Rotate the bagger top to align the key holes in the bagger top brackets with the keys in the posts on the bagger frame (Figure 16).

  • Page 11: Installing The Chute

    Lift the bagger top and install the bags by sliding the bag frame hooks onto the retaining brackets (Figure 17). Installing the Chute Parts needed for this procedure: Cutoff baffle Chute Procedure Lift up the grass deflector and locate the existing cutoff baffle.
  • Page 12 g015223 Figure 22 g015221 Figure 20 1. Upper latch 2. Flexible latch 1. Pivot rod 4. Nut (5/16 inch) 2. Bolt 5. Locknut Secure the chute to the mower deck by hooking 3. Bagger-cutoff baffle the flexible latch on the chute to the retaining clasp welded on the mower deck (Figure 22).

  • Page 13: Connecting With The Discharge Tube

    Connecting with the Installing the Deck Ring Discharge Tube Parts needed for this procedure: Deck ring Parts needed for this procedure: Bolt (5/16 x 3/4 inch) Discharge tube Locknut (5/16 inch) Procedure Procedure Slide the curved end of the discharge tube into Install the interlocking deck rings to the bottom the opening in the bagger top (Figure...

  • Page 14: Installing The Blade

    Operation Note: Determine the left and right sides of the machine from the normal operating position. Installing the Blade WARNING To avoid personal injury, follow these Parts needed for this procedure: procedures: Hi-Lift blade • Become familiar with all operating and safety instructions in the Operator's Procedure Manual for the machine before using this...

  • Page 15: Clearing Obstructions From The Bagger

    Install the bags by sliding the bag frame hooks onto the retaining brackets. Lower the bagger top onto the bags. Clearing Obstructions from the Bagger Park the machine on a level surface and disengage the blade control switch. Move the motion control levers outward to the g005758 neutral lock position, shut off the engine, remove Figure 25...

  • Page 16: Using The Draw Bar

    Using the Draw Bar Operating Tips The bagger support bracket has a draw bar feature Tips for Bagging that can be used for towing. • Read and understand all the operating instructions of the machine. Remembering the Size • When turning, slow down and observe the Remember that the machine is longer and wider with clearance.
  • Page 17 CAUTION As the bagger fills, extra weight is added to the back of the machine. If you stop and start suddenly on hills, you may lose steering control or the machine may tip. • Do not start or stop suddenly when going uphill or downhill.

  • Page 18: Maintenance

    Maintenance Note: Determine the left and right sides of the machine from the normal operating position. Recommended Maintenance Schedule(s) Maintenance Service Maintenance Procedure Interval • Inspect the bagger. After the first 10 hours • Clean the bagger. Before each use or daily •...

  • Page 19: Inspecting The Mower Blades

    Inspecting the Mower Storage Blades Storing the Bagger Inspect the mower blades regularly and whenever a Attachment blade strikes a foreign object. If the blades are badly worn or damaged, install new Clean the bagger attachment; refer to Cleaning blades. Refer to your mower or mower Operator's the Bagger Attachment (page 19).

This manual is also suitable for:

79414

Table of Contents