LG WT18WV6 Owner's Manual page 78
Hide thumbs
Also See for WT18WV6:
- Owner's manual (40 pages) ,
- Owner's manual (40 pages) ,
- Owner's manual (40 pages)
Table of Contents
Advertisement
Available languages
Available languages
global_main.book.book Page 35 Thursday, April 11, 2024 2:28 PM
Symptoms
LE1
FOREIGN OBJECTS
ERROR
OE
WATER OUTLET ERROR
UE
UNBALANCE ERROR
tE
TEMPERATURE SENSOR
ERROR
FE
OVERFLOW ERROR
PE
PRESSURE SENSOR
ERROR
LE
MOTOR LOCKED ERROR
AE
CLUTCH ERROR
tcL
TUB CLEAN ALARM
Possible Cause & Solution
Foreign objects, such as coins, pins, clips, etc.,are caught between the
pulsator and the inner drum.
• Turn off the appliance and then press the POWER button. Press the Spin
button without selecting a cycle to drain and spin the laundry. When the
spin is complete, remove the clothes and then find and remove any objects
caught in the pulsator gap.
Drain hose is kinked, pinched, or clogged.
• Clean and straighten the drain hose.
Drain discharge is more than 1.2 m above the bottom of the appliance.
• Adjust the hose or reconfigure the drain pipe. Maximum drain height is 1.2
m.
Rebalancing operation is not successful.
• The automatic attempt to rebalance the laundry was not successful. The
cycle has been paused to allow the laundry to be manually adjusted.
The load is too small.
• Add more items to allow the appliance to balance the laundry.
Heavy items are mixed with lighter items.
• Wash items of somewhat similar weight.
The load is out of balance.
• Manually redistribute the laundry if laundry have become tangled.
Control error.
• Unplug the appliance and wait 60 seconds. Reconnect power and try
again.
• If the error code is still displayed, call for service.
Water overfills due to the faulty water valve.
• Close the water taps, unplug the appliance, and call for service.
The water level sensor is not working correctly.
• Close the water taps, unplug the appliance, and call for service.
A motor error has occurred.
• Allow the appliance to stand for 30 minutes and then restart the cycle.
• If the error code is still displayed, call for service.
Clutch error.
• Unplug the appliance and call for service.
The programme has run more than 30 times.
• Run the Tub Clean function.
TROUBLESHOOTING
35
Advertisement
Chapters
Table of Contents
