Table of Contents
Advertisement
Quick Links
o
Operating Instructions
Bedienungsanleitung
Mode d'emploi
Istruzioni per 'uso
Page 1
Deutsch;
Seite 21
Francais;
Page 41
Italiano;
Pag. 61
Thank you for buying this Pioneer product.
Please read through these operating instructions and then
you will know how to operate your model properly. After you
have finished reading the instructions, put them away in a
safe place for future reference.
These operating instructions are based on the model HE, and
they can be used for the HB, KU, KC, R, R/G models. The
differences between the models are given below.
HE model:
For Europe ('HE' stamped on packing case): power line
voltage is a.c. 220 volts ~v.
HB model:
For U.K. ('HB' stamped on packing case): power line
voltage is a.c. 240 volts ~v.
KU and KC models:
For U.S.A. and Canada ('KU' or 'KC' stamped on packing
case): power line voltage is AC 120 volts.
R and R/G models:
For destinations excluding above (R or R/G stamped on
packing case); A 2-point (a.c. 110 V - 120 V/220 V -
240 V) voltage selector switch is provided.
IMPORTANT
NOTICE
{For KU and KC models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep in a secure area. This is for your security.
KU (for U.S.A.) and KC (for Canada) models are not provid-
ed with LINE VOLTAGE
SELECTOR
switch.
Rear Panel Facilities ...............ceeeeeeeeeeeee 3
Front Panel Facilities .............--2.csesenceees 6
MULTI-MIXING AMPLIFIER
MEHRFACH-MISCHVERSTARKER
70
AMPLIFICATEUR
MULTI-MIXEUR
AMPLIFICATORE DI MIXAGGIO MULTIPLO
CONTENTS
Ke aes
ee
LINE VOLTAGE SELECTOR SWITCH
Only R and R/G models are provided with this switch but
KU, KC and other models (HE, HB) are not provided with this
switch
You
will find the line voltage selector switch on the rear
panel. This switch has positions for
110 V - 120 V and 220V
- 240 V power sources. Before your model is shipped from
the factory , the switch is set to the power requirements of
the destination; nevertheless, you should check that it is set
properly before plugging the power cord into the AC outlet.
If the voltage is not properly set or if you move to an area
where the voltage requirements
differ, adjust the selector
switch as follows.
Before adjusting, disconnect the power
cord.
1. Prepare a medium size screwdriver.
2. Insert the screwdriver into the arrow on the voltage selec-
tor and adjust so that the tip of the arrow points to the
voltage value of your area.
ENGLISH
DEUTSCH
VOLTAGE SELECTOR
Screwdriver
jo)
=
=
a
E
HNOv-120V
220V-240V
WARNING:
TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE
TO
RAIN OR MOISTURE.
Hints on Creating Original Sound ............ 8
Using the Cord Holder ................c000000 19
|
W) PIONEER'
2233
Advertisement
Table of Contents
