Keyboard Removal
Prerequisite:
Disconnect the power
SOP if the Refresh
1. Hold the Refresh
2. While holding these keys, remove the power cable from the device and then
release the keys. The device should shut down and remain off.
3. Verify that the battery has been properly disconnected by the pressing the
Power key. The device should not be powered on.
If the keyboard keys fail to function to enable the Shipping Mode, remove the
battery pack to disconnect the power source.
Attention!
Before removing or installing the keyboard,
Power Down Procedure
Chromebook.
1.
Carefully flip the top assembly and place it on the surface with the keyboard side facing up
(Figure 3-14).
2.
Using a flat-headed tool, carefully pry to disengage the bottom side latches of the keyboard
(A) as shown in Figure 3-14.
Figure 3-14.
16
source, and then enter the Shipping Mode by the following
and Power
and Power
(Enter Shipping Mode SOP) to avoid damaging the
Keyboard Removal
keys remain work.
keys at the same time.
make sure to complete the