Advertisement
Quick Links
Advertisement
Related Manuals for Asus E410KA
Summary of Contents for Asus E410KA
- Page 1 ASUS LAPTOP E410KA E510KA Repair Manual...
- Page 3 Service Overview • ASUS is not responsible for direct, indirect, intentional o unintentional damages resulting from improper installation and operation. • Carefully read through this Service Guide for a look at various components of the device before performing any service and repairs.
- Page 4 Pre-repair checklist • Read the entire manual before starting any service procedures and follow all instructions. • Back up the data on your device. • Place your device on a clean and stable surface. • Turn off your device. • Disconnect all connected peripherals and cables.
- Page 5 ASUS E410KA Overview Top View Bottom View ❶ Microphone ❶ Audio speakers ❷ Camera ❸ Display panel ❹ Keyboard ❺ Capital lock indicator ❻ Function key lock indicator ❼ Touchpad / NumberPad (on selected models) ❽ Power button ❾ Power indicator Right View ❶...
- Page 6 ASUS E510KA Overview Top View Bottom View ❶ Microphone ❶ Audio speakers ❷ Camera indicator ❸ Camera ❹ Display panel ❺ Keyboard ❻ Capital lock indicator ❼ Function key lock indicator ❽ Touchpad ❾ Power button ❿ Power indicator ⓫ Numeric keypad ⓬...
- Page 7 Repair Overview This chapter describes disassembly and assembly (Assemble document please look up from the last page), please follow the information provided in this section to perform the complete disassembly procedure. ♦ Precautions: Before you perform any service or repair on the notebook, please pay special attention to the cautions prevent any damages to the notebook. 1.
- Page 8 Components Top View ♦ KEYBOARD MODULE ♦TOUCHPAD MODULE ♦ LCD COVER ♦ WIFI CARD ♦ HINGE ♦ LCD BEZEL ♦ MAIN BOARD ♦ WIFI ANTENNA ♦ BATTERY CABLE ♦ SPEAKER MODULE ♦ TP FFC ♦ IO FFC ♦ IO BOARD ♦...
- Page 9 Components Bottom View ♦ KEYBOARD MODULE ♦ LCD COVER MODULE ♦ THM BOT ASSY ♦ LCD BEZEL ♦ BOTTOM CASE ♦ MAIN BOARD ♦ LCD Panel ♦ IO BOARD ♦TOUCHPAD MODULE Back...
- Page 10 Appropriate Tools Please prepare and select the appropriate tools to disassemble/assemble for the ASUS E410KA E510KA notebook. ♦ Screwdriver ♦ Alcohol 95% ♦ Glove (P/N:16-TT0E00517) ♦ Dust-free Cloth Please accord to different screw specification to choose different screwdriver and head.
- Page 11 BOTTOM CASE (For E410KA) Disassembly Notice Step 1 : Remove screws *10pcs. Step 2 : Use plastic blade to pry the bottom case. Screws Spec Torque (kgf-cm) 2.0 ± 0.2 SCREW M2*7.5L (4.5,0.8) B-ZN,NY 2.0 ± 0.2 SCREW M2*5.5L (4.5,0.8) B-ZN,NY...
- Page 12 BOTTOM CASE (For E510KA) Disassembly Notice Step 1 : Remove screws *10pcs. Step 2 : Use plastic blade to pry the BOTTOM CASE. Assembly Notice Screws Spec Torque (kgf-cm) Please keep pace with the color of screws 2.0 ± 0.2 SCREW M2*7.5L (4.6,0.8) W-NI,NY when you change them.
- Page 13 BATTERY Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Before disassembly battery connector, please be sure to pull out adapter and disconnect the battery more than ten seconds in order to IC damage. Step 1 : Disconnect the battery connector. Torque(kgf-cm) Screws Spec...
- Page 14 Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove the screws *1pcs. Step 2 : Remove SSD and SSD PAD. Assembly Notice Step 3 : Tear off SSD PAD. Please make sure to paste SSD PAD before Screws Spec Torque (kgf-cm)
- Page 15 WLAN Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect the Antenna connector. Screws Spec Torque (kgf-cm) Step 2 : Remove screw *1pcs. SCREW M2*2L (4.5,0.6) (K)B-ZN,NY 2.0±0.2 Step 3 : Remove WLAN card. Assembly Notice For Antenna assembly, please follow the mark below to tidy cable.
- Page 16 IO BOARD Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect the IO FFC connector. Screws Spec Torque (kgf-cm) Step 2 : Remove screws *5pcs. Step 3 : Turn over the hinge. SCREW M2.5*5L (K) W-NI,NY 2.5 ±...
- Page 17 Here are some samples of FFC damage: Disconnect and remove(yellow mark ) 2. For SPEAKER assembly, please follow the mark below to tidy cable. Remove Disconnect Tear off(blue mark) 3. Only for E410KA, please paste ANTENNA ACETONE TAPE after you assemble the TP FFC . Back...
- Page 18 SCREW M2*1.5L (7,0.4) (K)B-ZN,NY #0 1.6 ± 0.2 Assembly Notice For TOUCHPAD MODULE assembly , please paste TAPE and GASKET to fix the TOUCHPAD module. FOR E510KA Remove TP GASKET CABLE ACETONE TYPE Remove FOR E410KA CABLE ACETONE TYPE TP GASKET TAPE Back...
- Page 19 THERMAL MODULE (with MAIN BOARD) Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Disconnect EDP CABLE (yellow mark) connector Screws Spec Torque (kgf-cm) Step 2 : Disconnect KEYBOARD FFC (red mark) connector SCREW M2*3L (4.5,0.8) (K)W-NI,NY 2.0 ±...
- Page 20 THERMAL MODULE Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Please follow the reverse screw numbers to remove screws *4pcs. Screws Spec Torque (kgf-cm) Step 2 : Remove the THERMAL MODULE from MB. SCREW M2*2L (4.5,0.6) (K)B-ZN,NY 2.0±0.2 Recommend that the force point is at green block, and pull up thermal module to take...
- Page 21 KEYBOARD MODULE Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove the KEYBOARD MODULE. Open and remove Back...
- Page 22 MAIN BOARD Mainboard connector placement BATTERY EDP CABLE IO FFC SPEAKER K/B FPC FP FFC TP/MB FFC Back...
- Page 23 MAIN BOARD Materials on mainboard E410KA MB MYLAR The MB MYLAR is not in 60 BOM, and you do not need paste new one after L3/L4 repairs the mainboard. E210KA CPU KAPTON Back...
- Page 24 When reuse the LCD BEZEL: Please paste new LCD ADHESIVE S ADHESIVE UP BEZEL ADHESIVE before ADHESIVE L assembly BEZEL. (New LCD BEZEL already contains LCD BEZEL PLASTIC SKU FOR E410KA / E510KA IS WITHOUT LCD BEZEL ADHESIVE. ADHESIVE.) Back...
- Page 25 Torque (kgf-cm) Step 2 : Remove the hinges *2pcs. SCREW M2.5*3L (K) W-NI,NY 2.5 ± 0.2 (For E410KA,you should remove 2 screws to disconnect the HINGE CAP .) 2.0 ± 0.2 SCREW M2*2.5L D4.5(K)B-ZN,NY Step 3 : Remove LCD PANEL with bracket .
- Page 26 LCD PANEL FOR PLASTIC SKU Assembly Notice Please be sure to pull out adapter and disconnect the battery. When reuse the LCD PANEL: Please use the fingertip to clean the residual glue on PANEL or BEZEL. Please paste new LCD BRACKET *2pcs. LCD BRACKET Please follow the green mark to tidy EDP cable and Antenna.
- Page 27 Step 1 : Remove the screws *6pcs. Screws Spec Torque (kgf-cm) Step 2 : Remove the hinges *2pcs.(For E410KA,you should 2.5 ± 0.2 SCREW M2.5*3L (K) W-NI,NY remove 2 screws to disconnect the HINGE CAP .) Step 3 : Pull out LCD adhesive *2pcs.
- Page 28 LCD PANEL FOR METAL SKU Assembly Notice Please be sure to pull out adapter and disconnect the battery. When reuse the LCD PANEL: Please use the fingertip to clean the residual glue on PANEL or BEZEL. When reuse the LCD COVER: Please paste new PANEL ADHESIVE *2pcs.
- Page 29 CAMERA Disassembly Notice Please be sure to pull out adapter and disconnect the battery. Step 1 : Remove the CAMERA . Remove. Back...