Page 1
Translated from Dutch to English - www.onlinedoctranslator.com Tumble dryer WQ33G2D0NL User manual and installation instructions Register your product on My Siemens and discover ers. exclusive services and off siemens-home.bsh-group.c om/welcome The future moves in. Siemens Home Appliances...
Refer to the Digital User Guide for more information. Table of contents 1 Safety........4 9 Programs ........ 26 1.1 General instructions ..... 4 9.1 Automatic programs ..26 1.2 Destination of the device 9.2 Time programs........27 comb ..........4 10 Accessories......
Page 3
16 Troubleshooting ....40 17 Transport, storage and disposal........45 17.1 Preparing the device for transport ........ 45 17.2 Disposal of your old device ..........45 18 Service........46 18.1 Product number (E no.) and production number (FD) ... 46 19 Consumption values ....
NLSafety 1 Safety Please observe the following safety precautions. 1.1 General instructions ¡Read these instructions for use carefully. ¡Keep the instructions for use and product information for later for use or for subsequent owners. ¡Do not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: ¡for dryer-suitable and water-washed textiles...
SafetyNL 1.4 Safe installation Observe the safety regulations when installing the device. WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Only connect and use the device according to the information on the rating plate. ▶ Only connect the device to an alternating current mains via a properly installed earthed socket.
Page 6
NLSafety WARNING ‒ Risk of fire! Using an extended power cord and unauthorized adapters is dangerous. ▶ Do not use extension cords or multiple sockets. ▶ If the power cord is too short, contact customer service. ▶ Use only adapters approved by the manufacturer. WARNING ‒...
SafetyNL ▶ Level the device using the device feet and a spirit level. There is a risk of tripping if hoses and mains connection cables are not properly laid. ▶ Lay the hoses and connecting cables in such a way that people cannot trip over them.
Page 8
NLSafety WARNING ‒ Risk of health hazard! Children could become trapped in the device and endanger their lives. ▶ Do not place the appliance behind a door that blocks or prevents the appliance door from opening. ▶ In the case of discarded appliances, unplug the power cord from the socket, then cut the power cord and damage the lock of the appliance door in such a way that the appliance door no longer closes.
Page 9
SafetyNL WARNING ‒ Risk of fire! The refrigerant R290 in this device is environmentally friendly but flammable and can ignite upon contact with open flames or ignition sources. ▶ Open flames and other ignition sources away from it keep the device. WARNING ‒...
NLSafety The appliance may tip over when sitting or leaning on the open door. ▶ Do not sit or lean on the appliance door. ▶ Do not place objects on the appliance door. Reaching into the rotating drum can cause injury to the hands. ▶...
Avoid material damageNL Foam or foam rubber can deform or 2 Material damage melt when drying. avoid Do not dry laundry containing ▶ foam or foam rubber. Follow these instructions to avoid Unsuitable cleaning agents can damage to property and the device. damage the surfaces of the device.
NLSet up and connect Spin the laundry in the washing 4 Setup and connection machine before drying. aMoist laundry extends the program duration and increases 4.1 Unpacking the device energy consumption. Observe the maximum load of the Objects left in the drum that are not programs.
Set up and connectNL Description Delivery scope Staging location To demand catch The device on On the floor a clean, efficient Tumble dryer fen and firm on- place surface. The device → Page 16 . Accompanying The device al- In a laundry documents borrow with the drying column...
NLSet up and connect 4.4 Water drain hose Pull the condensation water hose from the connection. Condensation water is formed during drying, which your appliance uses for automatic cleaning. Use the water drain hose to direct excess condensation water directly into the waste water.
Page 15
Set up and connectNL Push the water drain hose onto Connection types for water drainage the connection as far as it will go. If the drain is clogged or closed, accumulated waste water can flow back into the unit. Before using the device, ensure ▶...
NLSet up and connect Drain in one The water drainage ditch. feeding hose com- cracked through the slide and with the confirmation fastening material The bend at the attach gutter. 4.5 Adjusting the device To reduce noise and vibration, place the device horizontally.
Get to know your deviceNL 5 Get to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the image may differ, e.g. the color and the shape. Door Air intake Bottom service flap...
NLGet to know your device 5.2 Control panel You can use the control panel to set all functions of your device and obtain information about its operating status. Programs → Page 26 Program selector → Page 30 Display → Page 19 Buttons →...
DisplayNL 6 Display The display shows the current setting values, selection options or information texts. Example display indication Description Indication Designation 0:40 Approximate expected program duration Program duration / remaining time of or time remaining in the program. the program 1:25 Time program Time program is set.
Page 20
NLDisplay Description Indication Designation The drying target is activated. Drying purpose cupboard - → "Buttons", page 23 The drying target is activated. Drying purpose cupboard - → "Buttons", page 22 dry Plus Drying target The custom drying target is activated. →...
Page 21
DisplayNL Description Indication Designation Pause Program status Program end Program status Example...
NLButtons 7 Buttons Here you will find an overview of the buttons and their setting options. Knob Description Choice Start Pause ¡start Start program, an- null or pause. ¡Cancel ¡pause ¡activate Activate or deactivate the child lock. ¡deactivate The control panels secured against accidental operation.
Page 23
ButtonsNL Knob Description Choice ¡Cupboard dry ¡With the Cabinet selection Cupboard dry ¡ +1 dry, the drying target is activated. ¡ +2 ¡ +3 The drying target lays determine how damp or dry the laundry is at the end of the program →...
Page 24
NLButtons Knob Description Choice Carefully ¡activate Activate gentle drying or deactivate. ¡deactivate The temperature becomes reduced for sensitive textiles, e.g. for polyacrylic or elastane. The program duration is extended. ¡Program end ¡The program end Ready in ¡Program duration to establish. The program duration is already included in the set number of...
Drying purposeNL 8 Drying purpose A drying target is specified for each automatic program. The drying target determines how dry or damp your laundry is at the end of the program. Laundry Drying result Drying purpose The laundry is dry. Multi-layered thick laundry Cupboard dry + that is difficult to dry.
NLPrograms 9 Programs You can dry your textiles either with an automatic program or a timed programme. 9.1 Automatic programs Tips Automatic programs in which moisture sensors measure the ¡Select the drying target according residual moisture of the laundry dry the textile or the desired during drying.
ProgramsNL Program Description Max. bela- thing (kg) Dry waterproof and outdoor clothing with Outdoor a membrane layer and water-repellent textiles. Pillow Dry a pillow with down filling or synthetic fibers. pillow Remark:To distribute the filling and remove moisture accumulation, fluff the pillows after the end of the program.
Page 28
NLPrograms Time program Description Max. bela- thing (kg) Dry all textiles except wool and silk. Suitable for pre-dried or slightly damp laundry and for post-drying multi-layered, thicker laundry.
accessoriesNL 10 Accessories Use only original accessories. These are tailored to the device. Remark:Some accessories are available in other colours. Please contact the → "Service", page 46 . Usage Order number Device space saving WZ27410 Connection set run on a suitable washing machine from the same the manufacturer and set up with the same width and...
QR code in information in the digital instructions the table of contents or at for use by scanning the QR code in www.siemens-home.bsh-group.com. the table of contents or at www.siemens-home.bsh-group.com. 11.1 Preparing laundry 12.1 Switching on the device...
ServiceNL Remove the laundry. 12.4 Starting the program 12.8 Switch off device Remark:If you want to change the time Set the program selector to . ▶ until the program end, first set the ready in time. 12.9 Fluff filter OnStart Pauseto press. ▶...
Page 32
NLService Remove the two-piece fluff filter. Open both fluff filters. Remove the fluff. Remove the fluff from the recess. Clean both fluff filters thoroughly with running, warm water and dry. Make sure that no lint falls into the air duct. Remove the two-piece fluff filter.
ServiceNL Close both fluff filters and put them Cleaning each time after drying is together. not required. ¡If you do not use the device as intended, cleaning writing, the device function may be impaired. Required:The display shows during use: . Clean the fluff filter →...
NLService Clean the filter mat thoroughly with 12.11 Condensation water tank running, warm water and press Condensation water is formed during out by hand. drying, which your appliance uses for automatic cleaning. The condensation water is collected at the factory in the condensation water tank of the device.
14 Basic settings You can set the basic settings of your device according to your wishes. Remark:You can find more information in the digital instructions for use by scanning the QR code in the table of contents or at www.siemens-home.bsh-group.com.
Remark:You can find more information in the digital instructions for use by scanning the QR code in the table of contents or at www.siemens-home.bsh-group.com. If you place a cloth under the service 15.1 Tips for cleaning and flap, you can collect the residual maintenance water from the bottom unit.
Page 37
Cleaning and maintenanceNL Pull out the insert horizontally. CAREFULLY Risk of cutting! Sharp edges on the heat exchanger can cause cuts if touched. Do not touch the fins of the heat ▶ exchanger. Open the base unit → Page 36 . Clean the heat exchanger cover with a soft brush.
Page 38
NLCleaning and maintenance Carefully clean the air inlet grille with Close bottom unit the brush attachment of a vacuum Required:The bottom unit is open. cleaner. → "Opening the bottom unit", page 36 Place the heat exchanger cover on the handle. Make sure that the grille is not deformed or damaged.
Cleaning and maintenanceNL 15.3 Humidity sensor The humidity sensor of this appliance determines how damp your laundry is during drying. Depending on the residual moisture of the laundry, the appliance changes the duration of the automatic program. Clean humidity sensor Over time, residues of lime, detergents and care products can deposit on the humidity sensor.
NLTroubleshooting 16 Troubleshooting You can resolve minor faults with the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. ▶...
Page 41
TroubleshootingNL Cause and troubleshooting Malfunction Device pauses, Cooling process active. but the drum No error - no action necessary. ▶ turns. Wrinkling. The loading quantity is too high. Please note the maximum loading quantity of the ▶ → "Programs", page 26 . The laundry has been left in the drum for too long after drying.
Page 42
NLTroubleshooting Cause and troubleshooting Malfunction The device uses condensation water for automatic self- Condensation water in it cleaning. condensation water tank voir, although the No error - no action necessary. ▶ water drain hose is Water drain hose is not connected correctly. locks.
Page 43
TroubleshootingNL Cause and troubleshooting Malfunction Heat exchanger is contaminated. Drying time is too long. → "Opening the bottom unit", page 36 . Clean heat exchanger. → "Clean the bottom unit", page 36 → "Close bottom unit", page 38 . The device is not properly leveled. Water is leaking.
Page 44
NLTroubleshooting Cause and troubleshooting Malfunction Laundry is too damp. Load quantity too little. Set a time program for final drying. ▶ → "Programs", page 26 Humidity sensor contaminated. → "Clean humidity sensor", page 39 . ▶ Drying process aborted and condensation tank filled. →...
Transport, store and dispose ofNL Secure the water drain hose on the 17 Transport, storage device against unintentional beat and remove loosening. Make sure that the water Here you will receive an explanation drain hose is not kinked. of how to prepare the device for Empty the condensation water container →...
NLService department Make sure that the cooling circuit ▶ Detailed information about the warranty pipes are not damaged. period and warranty conditions in your country can be obtained from our service Unplug the power cord from the wall department, your dealer or on our socket.
Consumption valuesNL 19 Consumption values The program Cotton eco The actual values may deviate from (indicated by "arrow") is suitable for the stated values depending on the drying cotton laundry with normal type of textiles, the composition of the humidity and from the point of view of laundry to be dried, residual moisture the combined energy consumption for in the textiles, the set drying degree,...