D-Link DWL-900AP Quick Installation Manual
D-link wireless access point quick installation guide
Hide thumbs
Also See for DWL-900AP:
- User manual (61 pages) ,
- Quick install manual (8 pages) ,
- Brochure (7 pages)
Advertisement
Table of Contents
This product can be set up using any
current web browser, i.e., Internet
Explorer 5x, Netscape Navigator 4x.
Before You Begin
It's best to use a computer (with an Ethernet adapter) that is connected to a router for
configuring the DWL-900AP+. The default IP address for the DWL-900AP+ is
192.168.0.50
with a Subnet Mask of 255.255.255.0. You will need to assign your
computer a Static IP address within the same range as the DWL-900AP+'s IP address
for the purpose of configuration of the DWL-900AP+. See the Manual on the CD-ROM
if you need assistance in assigning a Static IP address for your network adapter.
Check Your Package Contents
These are the items included with your DWL-900AP+ purchase:
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the
property of their respective holders. Software and specifications subject to change without
• DWL-900AP+ Wireless Access Point
• CD-ROM (containing Manual and Warranty)
• Ethernet (CAT5 UTP/Straight Through) Cable
• 5V DC, 2A Power Adapter
notice. DWL-900AP+.05292002
DWL-900AP+
D-Link AirPlus™
Wireless Access Point
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.
Advertisement
Table of Contents
Related Manuals for D-Link DWL-900AP
Summary of Contents for D-Link DWL-900AP
-
Page 1: Before You Begin
Subnet Mask of 255.255.255.0. You will need to assign your computer a Static IP address within the same range as the DWL-900AP+’s IP address for the purpose of configuration of the DWL-900AP+. See the Manual on the CD-ROM if you need assistance in assigning a Static IP address for your network adapter. - Page 2 First, connect the power adapter to the receptor at the back panel of the DWL-900AP+ and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
-
Page 3: Using The Setup Wizard
When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.50” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. - Page 4 Using The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens. Click Next...
- Page 5 Click Next Step 3 - Encryption The DWL-900AP+ is capable of three levels of wireless encryption - 64-bit, 128-bit, and 256-bit. By default the encryption is disabled. You can change the encryption settings for more secure wireless communication.
- Page 6 Your Setup is Complete! Click Restart Click Close You will be returned to the Home tab.
- Page 7 Click Exit For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface; or to the manual located on the CD-ROM.
-
Page 8: Technical Support
Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.