Advertisement
Advertisement
Table of Contents
Related Manuals for D-Link DE-81 6TP
Summary of Contents for D-Link DE-81 6TP
- Page 2 Table of Contents About this Guide ... Rack Mounting ... Installing Network Cables... Station Connections with Twisted-Pair Hub-to-Hub connections with Twisted-Pair Thin Coaxial Cable Connections..7 Thick Coaxial Cable Connections ..9 Connecting Power ... LED Indicators... Specifications ... Cable .
-
Page 3: About This Guide
About this Guide This guide provides instructions for instal-ling of the products described below. These D-Link@ Ethernet Hubs are all Plug and Play compliant for easy installation. When designing your cable configuration, it is necessary to strictly observe the Ethernet cabling rules. -
Page 4: Rack Mounting
Rack Mounting The Ethernet Hub may stand alone, or may be mounted in a standard 19-inch equip-ment rack. Rack mounting produces an orderly installation when you have a number of related network devices. Use the six supplied screws to fasten the supplied mounting brackets to either end of the hub, then fasten the hub into the rack. -
Page 5: Installing Network Cables
Installing Network Cables Your Ethernet Hub is denominated as an 12-port, or 16-port, or 24-port Ethernet Hub according to the number of its front-panel 1OBaseT ports. Additionally it has two ports whose connectors are on the rear panel: one lOBase2 port (BNC connector), and one lOBase5 port (AUI These two un-numbered rear-panel ports are logically equivalent with the numbered ports on... - Page 6 Connect each station to the Ethernet Hub by means of a twisted-pair straight cable (10BaseT cable, Category 3, 4, or 5). Plug one RJ-45 connector into a front-panel port of the Ethernet Hub, and plug the other RJ-45 connector into the station’s Ethernet adapter.
- Page 7 connection involving a Model DE-816TP or Model DE-824 Ethernet Hub, there is the alternative of using a straight cable. Internal Crossover Features The Model DE-816TP Ethernet Hub and DE- 824TP Ethernet Hub feature internal cross-over alternatives for Port 1: Model DE-816TP The port numbered as Port 1 is identical with each of the other numbered ports.
- Page 8 Model DE-824TP Ethernet Hub The connector numbered as Port 1 is equipped with a switch labeled “Uplink” When the Uplink switch is in the “off (tall) position, the Port 1 connector is wired “straight” to the supporting circuitry, and Port 1 is then identical with each of the twenty-three other numbered ports.
- Page 9 two connectors would cancel one another, and the hub-to-hub connection would fail.) Thus the rule for making a hub-to-hub connection with twisted-pair cable is as follows: To make a hub-to-hub connection with a straight cable, Uplink must be selected at one end of the cable, and Uplink must not be selected at the other end of the cable.
- Page 10 Thin coax Segment Sometimes several Ethernet Hubs must be co- located to support a larger array of stations than can be handled by a single Ethernet Hub. Then it is useful to stack the Ethernet Hubs by joining their BNC connectors with 0.5 meter patches of thin coaxial cable.
-
Page 11: Connecting Power
(European) power cord is supplied with your Ethernet Hub. See Spefications, below, for power cord details. Ascertain that the power switch on the rear panel of the Ethernet Hub is in the off position. female end of the power cord firmly into the... -
Page 12: Led Indicators
Plug the other end of the power cord into an electric service outlet. Turn on power to the Ethernet Hub by switching its rear-panel power switch to the LED Indicators LED indicators are located on the front panel of the Ethernet Hub. -
Page 13: Specifications
One Link/Rx LED for each numbered port. Steady green port has good linkage to its partner device. Flashing green the port is receiving data from its partner device. If the port is connected but the Link/Rx LED is dark, check whether (1) the Ethernet Hub and the partner device both have power, (2) the port’s cable is firmly seated in its connectors in the Ethernet Hub and in the... - Page 14 Plug Rating Cord Rating Length Safety Standard W x H x L, mm (including mounting brackets): DE-812TP+: 483x44 125 DE-81 6TP: 483x44 125 DE-824TP 483x44 211 DE-81 2TP+: DE-816TP: DE-824TP: 0” - 55” c 10 - 90 % non-condensing Type 1 (US) or Type 2 (Europe) per...
- Page 15 U S A 5 Musick, Tel. C a n a d a 2180 Durwin Driver, Unib#6, LSL 5M8, Canada Tel. D-Link House, 6 Garland Road, Stanmore, London HA7 IDP, U.K. Tel. Auf Der Krautweide Tel. Le Florilege Fonteany Tel. 33-l-30.23.86.88 World Trade Center, P.O.Box...