Page 1
All manuals and user guides at all-guides.com COMPONENT .com Technisches Handbuch / Technical Manual Systembaugruppe / Systemboard D1215...
Page 2
Further information can be found in the "Safety, Warranty and Ergonomics" booklet. The latest information on our products, tips, updates, etc., can be found on the internet under: http://www.fujitsu-siemens.com Are there ..any technical problem or other question you need clarified? Please contact: ·...
Page 3
All manuals and user guides at all-guides.com...
Page 4
Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH A26361-D1215-Z120-1-7419 Bestell-Nr./Order No.: Printed in the Federal Republic of Germany AG 0102...
Page 5
All manuals and user guides at all-guides.com German English Systembaugruppe D1215 System Board D1215 Technisches Handbuch Technical Manual Ausgabe Januar 2002 January 2002 edition...
Page 6
All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2002 All rights, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole, are reserved.
All manuals and user guides at all-guides.com Contents Introduction............................1 Notational conventions ......................1 Important notes..........................1 Information about boards ......................2 Features ............................3 External ports ..........................5 Internal ports and connectors ....................6 Temperature / System monitoring....................7 Hard disk connection .........................8 LAN connector...........................8 Screen resolution........................9 PCI bus interrupts ........................9 Settings with switches and jumpers ....................10 Recovering System BIOS - switch 2 ..................10...
Page 8
All manuals and user guides at all-guides.com...
All manuals and user guides at all-guides.com Introduction Depending on the configuration chosen, some of the hardware components described may not be available on your system board. You will find further information in the "BIOS Setup" description. Further information about drivers is provided in the readme files on the hard disk, on the supplied drivers diskettes, on the "Drivers &...
All manuals and user guides at all-guides.com Important notes The shipped version of this board complies with the requirements of the EEC directive 89/336/EEC "Electromagnetic compatibility". Compliance was tested in a typical PC configuration. When installing the board, refer to the specific installation information in the Operating Manual or Technical Manual for the receiving device.
Mono Micro-In, Stereo Line-In external: Game/Midi port, Stereo Line-Out / headphones · Fujitsu Siemens system monitoring and temperature monitoring · 2 DIMM slots for 32 to 512 Mbyte main memory (SDRAM memory modules meet the PC100/PC133 specification) without ECC ·...
Page 12
All manuals and user guides at all-guides.com Features · 1 PCI slot or 3 PCI slots Up to three PCI slots are available, which support 3.3 V main and auxiliary voltages. · AGP/GPA slot The AGP slot supports the 1x, 2x and 4x AGP mode and GPA memory boards. The voltage is detected and configured automatically.
All manuals and user guides at all-guides.com Features External ports 9a 9c 1 = PS/2 mouse port 7 = VGA port 2 = PS/2 keyboard port 8 = Game/Midi port 3 = LAN connector 9a = Audio Line-Out 4 = USB ports 1 and 2 Headphones 5 = Serial port 1 9b = Audio Line-In...
All manuals and user guides at all-guides.com Features Internal ports and connectors DIMM 2 DIMM 1 1 = Power supply 8 = Wake On LAN 2 = Chipcard reader interface or serial port 2 9 = USB ports C / D 1 3 = Floppy Disk Drive 10 = CD audio input...
In addition, any unnecessary noise is also prevented by reducing the fan speed, and information is provided about the system status. Cover monitoring protects the system from unauthorised opening. An onboard controller developed by Fujitsu Siemens Computers controls the temperature and system monitoring. The following functions are supported: Temperature monitoring: Measurement of the processor and the system temperature with an onboard temperature sensor.
All manuals and user guides at all-guides.com Features Voltage monitoring: The voltages 12 V, 5 V and the CMOS battery are monitored. With hardware monitoring - regardless of the operating system and processor - the advantages compared to conventional software monitoring are clear: suitable for all operating systems and processor types no additional load on processor (performance) optimum temperature protection, even if process faults or faults are present in the...
All manuals and user guides at all-guides.com Features Screen resolution Depending on the operating system used, the screen resolutions in the following table refer to the system board screen controller. If you are using an external screen controller, you will find details of supported screen resolutions in the Operating Manual or Technical Manual supplied with the controller.
All manuals and user guides at all-guides.com Settings with switches and jumpers Settings with switches and jumpers DIMM 2 DIMM 1 Switch 1 = must be set to Switch 3 = Write-protection for floppy disk Switch 2 = System BIOS recovery Switch 4 = must be set to off The clock frequency of the processor is set automatically.
All manuals and user guides at all-guides.com Add-on modules Add-on modules Exit Suspend mode, switch off the device and remove the power plug from the mains supply, before carrying out any of the procedures described in this chapter! Even when you have switched off the device, parts (e.g. memory modules, AGP and PCI extension boards) are still supplied with power.
All manuals and user guides at all-guides.com Add-on modules Installing and removing processors Ê Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2). Ê Remove the old processor from the socket (3). Ê...
All manuals and user guides at all-guides.com Add-on modules Upgrading main memory These slots are suitable for DIMM format 16, 32, 64, 128 and 256 Mbyte SDRAM memory modules. Memory modules with different memory capacities can be combined. You may only use unbuffered 3.3 V memory modules. Buffered memory modules are not supported.
All manuals and user guides at all-guides.com Add-on modules Upgrading an AGP screen controller or the GPA memory If your system board has only one PCI slot then only one GPA memory board and no AGP screen controllers are supported by the system board. If your system board is provided with three PCI slots then the system board supports AGP screen controllers with 1x, 2x and 4x AGP modes and GPA memory boards.
All manuals and user guides at all-guides.com Add-on modules Replacing the lithium battery Incorrect replacement of the lithium battery may lead to a risk of explosion. The lithium battery must be replaced with an identical battery or a battery type recommended by the manufacturer (CR2032).
All manuals and user guides at all-guides.com Glossary Glossary The technical terms and abbreviations given below represent only a selection of the full list of common technical terms and abbreviations. Not all technical terms and abbreviations listed here are valid for the described system board. ACPI Advanced Configuration and IPSEC...