hit counter script
Brother DCP-7065DN Basic User's Manual
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. All in One Printer
  5. DCP 7065DN
  6. Basic user's manual

Brother DCP-7065DN Basic User's Manual

Brother dcp-7065dn: user guide
Hide thumbs Also See for DCP-7065DN:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Advanced User's Manual
BASIC USER'S GUIDE
DCP-7060D
DCP-7065DN
HL-2280DW
Not all models are available in all countries.
Version C
USA/CAN

Advertisement

Table of Contents
loading

Related Manuals for Brother DCP-7065DN

Summary of Contents for Brother DCP-7065DN

  • Page 1 BASIC USER’S GUIDE DCP-7060D DCP-7065DN HL-2280DW Not all models are available in all countries. Version C USA/CAN...
  • Page 2  may support an insurance claim by you in the event of product loss covered by insurance; and,  will help us notify you of enhancements to your product and special offers.

  • Page 3: Brother Numbers

    Your registration with Brother:  may serve as confirmation of the purchase date of your product should you lose your receipt; may support an insurance claim by you in the event of product loss covered by insurance; and,  ...

  • Page 4: Ordering Accessories And Supplies

    For best quality results use only genuine Brother accessories, which are available at most Brother retailers. If you cannot find the accessory you need and you have a Visa, MasterCard, Discover, or American Express credit card, you can order accessories directly from Brother. (You can visit us online for a complete selection of the Brother accessories and supplies that are available for purchase.)

  • Page 5: Usa And Canada

    Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials...
  • Page 6 Consumable and Accessory Items include Supply Brother or the Brother Authorized but are not limited to print heads, toner, Service Center with a copy of your dated bill of drums, ink cartridges, print cartridges, sale showing that this Product was purchased cordless handset battery, refill ribbons, within the U.S.
  • Page 7 Product is entitled to warranty coverage.  This Limited Warranty (and Brother's Your credit card will be charged up to the cost of obligation to you) may not be changed in any a new Product only if: (i) you do not return your...
  • Page 8 When shipping or transporting your MFC/Fax machine, please refer to your Operation Manual for the proper packaging procedures. For Laser units: Failure to remove the Toner Cartridge (and Toner Drum Unit, waste toner packs or oil bottles on applicable models) during shipping or transport will cause severe damage to the Laser MFC/Fax machine and will void the Warranty.
  • Page 10 User’s Guides and where do I find it? Which manual? What’s in it? Where is it? Safety and Legal Read this Guide first. Please read the Safety Printed / In the Box Instructions before you set up your machine. See this Guide for trademarks and legal limitations.

  • Page 11: Table Of Contents

    Type and size of paper .................. 16 Handling and using special paper ..............18 Loading documents How to load documents ..................21 Using the automatic document feeder (ADF) (For DCP-7065DN) ....21 Using the scanner glass ................22 Making copies How to copy ......................24 Stop copying....................
  • Page 12 Troubleshooting Error and maintenance messages...............44 Document Jams....................47 Document is jammed in the top of the ADF unit (For DCP-7065DN) ....47 Document is jammed under the document cover (For DCP-7065DN) ..47 Removing small documents jammed in the ADF (For DCP-7065DN) ...48 Document is jammed at the output tray (For DCP-7065DN) ......48...
  • Page 13 Table of Contents (ADVANCED USER’S GUIDE) The Advanced User's Guide explains the following features and operations. You can view the Advanced User's Guide on the Documentation CD-ROM. General Setup Memory storage Ecology features Toner Settings LCD Contrast User Settings List...

  • Page 15: General Information

    Italics Italicized style emphasizes an may result in damage to property or loss of important point or refers you to product function. a related topic. Electrical Hazard icons alert you to a...

  • Page 16: Accessing The Advanced User's Guide, Software User's Guide And Network User's Guide

    Advanced User’s Guide, Software User’s Guide and Network User’s Guide This Basic User's Guide does not contain all the information about the machine such as how to use the advanced features for Copy, Printer, Scanner and Network (for DCP-7065DN and HL-2280DW). When you...
  • Page 17 (Macintosh) ® • (Windows users only) Your Web browser may display a yellow bar at the top of the Note page that contains a security warning Presto! PageManager is available as a about Active X controls. For the page to...

  • Page 18: Accessing Brother Support (Windows ® )

    Support (Windows for FREE photo projects and printable downloads, click Brother CreativeCenter. You can find all the contacts you will need, such as Web support (Brother Solutions To return to the main page, click Back. Center), Customer Service and Brother Or, if you have finished, click Exit.

  • Page 19: Accessing Brother Support (Macintosh)

    General information Accessing Brother Support (Macintosh) You can find all the contacts you will need, such as Web support (Brother Solutions Center), Customer Service and Brother Authorized Service Centers in Brother numbers on page i and on the Installation CD-ROM.

  • Page 20: Control Panel Overview

    Options Job Cancel You can quickly and easily choose temporary Cancels a print job and clears it from the settings for copying. These settings include: machine’s memory. To cancel multiple print jobs, hold down this key until the LCD shows Quality Job Cancel (All).
  • Page 21 General information 4 LCD 6 Stop/Exit Displays messages to help you set up and use Stops an operation or exits from a menu. your machine. 7 Start (For HL-2280DW) A four level indicator shows Lets you start making copies or scanning.

  • Page 22: Loading Paper

    Loading paper in the standard paper tray You can load up to 250 sheets. Paper can be loaded up to the maximum paper mark (b b b) on the sliding paper width guide. (For recommended paper to use, see Paper...
  • Page 23 Make sure that the guides are tray and then pull out the back of the paper firmly in the slots. tray. (Legal or Folio size paper is not available in some regions.)

  • Page 24: Loading Paper In The Manual Feed Slot

    You can load envelopes and special print Put the paper tray firmly back in the media one at a time into this slot. Use the machine. Make sure that it is completely manual feed slot to print or copy on labels, inserted into the machine.
  • Page 25 Using both hands, put one sheet of paper in the manual feed slot until the front edge of the paper or transparency touches the paper feed roller. When you feel the machine pull in the paper, let go. Open the manual feed slot cover.
  • Page 26 Printing on thick paper, bond paper, Open the manual feed slot cover. labels, and envelopes When the back output tray is pulled down, the machine has a straight paper path from the manual feed slot through to the back of the machine.
  • Page 27 • Make sure that the print media is straight and in the proper position on the manual feed slot. If it is not, the paper may not be fed properly, resulting in a skewed printout or a paper jam.

  • Page 28: Unscannable And Unprintable Areas

    Chapter 2 Unscannable and unprintable areas The figures below show maximum unscannable and unprintable areas. The unscannable and unprintable areas may vary depending on the paper size or settings in the application you are using. Usage Document Top (1) Left (2)

  • Page 29: Paper Settings

    Paper Type for printing copies: Letter, Legal, Executive, A4, A5, A5 L, A6, B5, B6 or Set up the machine for the type of paper you Folio. are using. This will give you the best print When you change the size of paper in the quality.

  • Page 30: Acceptable Paper And Other Print Media

     Avoid touching the printed surface of the paper immediately after printing.  Before you buy a lot of paper, test a small quantity to make sure the paper is suitable. Recommended paper and print media...

  • Page 31: Paper Capacity Of The Paper Trays

    406.4 mm) Recycled paper, Envelopes and Labels Legal or Folio size paper is not available in some regions outside the USA and Canada. Folio size is 8.5 in.  13 in. (215.9 mm x 330.2 mm) Recommended paper specifications The following paper specifications are suitable for this machine.

  • Page 32: Handling And Using Special Paper

    Preprinted paper must use ink that can  1 A curl of 0.08 in. (2 mm) or greater may cause jams to occur. withstand the temperature of the machine’s fusing process 392 degrees •...
  • Page 33 The envelope should lie flat and not be of baggy or flimsy construction. You should buy quality envelopes from a supplier who understands that you will be using the envelopes in a laser machine.
  • Page 34 Chapter 2 If you use any of the types of envelopes Types of labels to avoid listed above, they may damage your Do not use labels that are damaged, curled, machine. This damage may not be wrinkled or an unusual shape.

  • Page 35: Loading Documents

    22. You can make copies and scan from the ADF* (Automatic Document Feeder) (*For • It is easier to use the ADF if you are DCP-7065DN) and the scanner glass. loading a multiple page document. • Make sure documents with correction fluid Using the automatic or written with ink are completely dry.

  • Page 36: Using The Scanner Glass

    Using the scanner glass on page 22. Using the scanner glass You can use the scanner glass to copy or scan pages of a book one page at a time. Document Sizes Supported Length: Up to 11.7 in. (297.0 mm) Width: Up to 8.5 in.
  • Page 37 Loading documents Close the document cover. IMPORTANT If the document is a book or is thick, do not slam or press on the cover.

  • Page 38: Making Copies

    For details about each option, see Press Menu, Options or Duplex and then the Advanced User's Guide on the CD-ROM. press a or b to scroll through the copy settings. When the setting you want is displayed, press OK.

  • Page 39: How To Print From A Computer

    How to print from a computer Printing a document The machine can receive data from your computer and print it. To print from a computer, install the printer driver. (See ® Printing for Windows or Printing and Faxing for Macintosh in the Software User's Guide for details about the print settings.)

  • Page 40: How To Scan To A Computer

    Note The screens on your PC may vary depending on your model. ControlCenter4 is a software utility that lets you quickly and easily access the applications you use most often. Using ControlCenter4 eliminates the need to manually launch specific applications.
  • Page 41 How to scan to a computer Set the file type for saving to a folder. By default, the scanned data is saved as JPEG (*.jpg). Click Configuration, and then select Button settings, Scan and File. The configuration dialog box appears. You can change the default settings.
  • Page 42 Chapter 6 Click File. The machine starts the scanning process. The folder where the scanned data is saved will open automatically.

  • Page 43: Changing The Scan Key Settings

    How to scan to a computer Changing the SCAN key settings Before scanning To use the machine as a scanner, install a scanner driver. If the machine is on a network, configure it with a TCP/IP address.  Install the scanner drivers on the Installation CD-ROM. (See the Quick Setup Guide.) ...
  • Page 44 1 You can choose the file type from the pull-down list. 2 You can enter the file name you want to use for the document. 3 You can save the file to the default folder, or choose your preferred folder by clicking the Browse button.

  • Page 45: Scanning Using The Scan Key

    Press a or b to choose the destination computer you want to send to. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer using the dial pad on the control panel.

  • Page 46: A Routine Maintenance

    • We recommend placing used consumable items on a piece of paper to prevent accidentally spilling or scattering the material inside. • If you use paper that is not a direct equivalent for the recommended paper, the life of consumable items and machine parts may be reduced.

  • Page 47: Replacing The Toner Cartridge

    Routine maintenance Replacing the toner cartridge Note • It is a good idea to keep a new toner Order No. For the Order No. of toner cartridge ready for use when you see the cartridges, see Replacing the consumable Toner Low warning.

  • Page 48: Replacing Toner Cartridge

    Continue mode (Press Menu, press a or b to choose 1.General After you have just used the machine, some Setup and press OK, press a or b to internal parts of the machine will be choose 4.Replace Toner, and press extremely hot.
  • Page 49 • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustration. WARNING DO NOT put a toner cartridge into a fire. It could explode, resulting in injuries.
  • Page 50 IMPORTANT Wait to unpack the new toner cartridge until immediately before you put it in the machine. If a toner cartridge is left unpacked for a long time, the toner life will be shortened. Pull off the protective cover. Note •...
  • Page 51 Put the new toner cartridge firmly into Clean the primary corona wire inside the the drum unit until you hear it lock into drum unit by gently sliding the green tab place. If you put it in properly, the green from left to right and right to left several lock lever will lift automatically.

  • Page 52: Cleaning The Corona Wire

    We recommend that you place the drum machine, DO NOT touch the shaded parts unit and toner cartridge assembly on a shown in the illustration. If you do this, you clean, flat surface with a sheet of may burn yourself.

  • Page 53: Replacing The Drum Unit

    Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. Replacing the drum unit Order No. DR-420 A new drum unit can print approximately 12,000 Letter or A4 size single-sided pages.
  • Page 54 Replace Drum machine turned on for 10 minutes to cool down. Replace Drum Please replace the drum unit with a new one. We recommend a genuine Brother drum unit be installed at this time. After replacement, reset the drum counter by following the instructions included with the new drum unit.
  • Page 55 Take out the drum unit and toner WARNING cartridge assembly. DO NOT put a toner cartridge into a fire. It could explode, resulting in injuries. DO NOT use cleaning materials that contain ammonia, alcohol, any type of...
  • Page 56 • To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. • Wait to unpack the new drum unit until immediately before you put it in the machine. Exposure to direct sunlight or room light may damage the drum unit.

  • Page 57: Resetting The Drum Counter

    CAUTION automatically. Be sure to return the green tab to the home position (a) (1). If you do not, printed pages may have a vertical stripe. Put the new drum unit and toner cartridge assembly in the machine.

  • Page 58: Troubleshooting

    Troubleshooting Error and maintenance messages As with any sophisticated office product, errors may occur and consumable items may need to be replaced. If this happens, your machine identifies the error or required routine maintenance and shows the appropriate message. The most common error and maintenance messages are shown below.
  • Page 59 (See Paper is jammed inside the machine Jam Inside machine. on page 52.) The paper is jammed in the back (See Paper is jammed at the back of the Jam Rear of the machine. machine on page 50.) The paper is jammed in the paper...
  • Page 60  If the problem continues, call Brother Customer Service. It is time to replace the drum unit. Replace the drum unit. Replace Drum (See Replacing the drum unit on page 40.) The drum unit counter was not Reset the drum unit counter.

  • Page 61: Document Jams

    (For DCP-7065DN) Document is jammed in the top of the ADF unit Take out any paper from the ADF that is (For DCP-7065DN) not jammed. Lift the document cover. Take out any paper from the ADF that is not jammed.

  • Page 62: Removing Small Documents Jammed In The Adf (For Dcp-7065Dn)

    (For DCP-7065DN) (For DCP-7065DN) Lift the document cover. Take out any paper from the ADF that is not jammed. Insert a piece of stiff paper, such as cardstock, into the ADF to push any Pull the jammed document out to the small paper scraps through.

  • Page 63: Paper Jams

    Make sure the paper is below the maximum paper mark (b b b) (1) of the paper tray. While pressing the green paper-guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.

  • Page 64: Paper Is Jammed At The Back Of The Machine

    Paper is jammed at the back of the machine If the LCD shows Jam Rear, a paper jam occurred behind the back cover. Follow these steps: Open the front cover. Leave the machine turned on for 10 minutes to cool down.
  • Page 65 Troubleshooting Pull down the tabs at the left and right IMPORTANT hand sides to open the fuser cover (1). • We recommend that you place the drum unit and the toner cartridges on a clean, flat surface with a sheet of disposable paper or cloth underneath it in case you accidentally spill or scatter toner.

  • Page 66: Paper Is Jammed Inside The Machine

    Paper is jammed inside the Using both hands, gently pull the jammed paper out of the fuser unit. machine If the LCD shows Jam Inside, follow these steps: Leave the machine turned on for 10 minutes to cool down. Open the front cover.
  • Page 67 Push down the green lock lever and take cartridge assembly. The jammed paper the toner cartridge out of the drum unit. may be pulled out with the drum unit and Clear the jammed paper if there is any toner cartridge assembly, or this may inside the drum unit.
  • Page 68 Lift the scanner cover. Put the toner cartridge back into the Use both hands to carefully pull the drum unit until you hear it lock into place. jammed paper up and out of the output If you put the cartridge in properly, the tray opening.
  • Page 69 • If you turn off the machine while the LCD shows a Jam Inside message, the machine will print incomplete data from your computer.

  • Page 70: Paper Is Jammed In The Duplex Tray

    When you open the front or back cover (back output tray) of the machine, DO NOT touch the shaded parts shown in the illustration. If you do this, you may burn yourself.
  • Page 71 Troubleshooting Pull the jammed paper out of the Make sure that the jammed paper does machine or the duplex tray. not remain under the machine from static electricity. Put the duplex tray back in the machine.

  • Page 72: If You Are Having Difficulty With Your Machine

    For technical help, you must call the country where you bought the machine. Calls must be made from within that country. If you think there is a problem, check the chart below and follow the troubleshooting tips. You can solve most problems by yourself.
  • Page 73 The machine prints the first couple  Check the settings in your application to make sure that it is set up to work with of pages correctly, then some your machine. pages have text missing.

  • Page 74: Scanning Difficulties

    The LCD shows No Paper or a  If there is paper in the paper tray, make sure it is straight. If the paper is curled, Paper Jam message. you should straighten it. Sometimes it is helpful to remove the paper, turn the stack over and put it back into the paper tray.

  • Page 75: Print Quality Difficulties

    Network difficulties (For DCP-7065DN / HL-2280DW) Difficulties Suggestions Cannot print over a wired Network. If you are having Network problems see the Network User's Guide for more information. Make sure your machine is powered on, is on-line, and is in Ready mode.
  • Page 76 Adverse conditions on the power connection (such as lightning or a power surge) may have triggered the machine’s internal safety mechanisms. Turn the machine off and unplug the power cord. Wait for ten minutes, then plug in the power cord and turn the machine on.

  • Page 77: Improving The Print Quality

    Troubleshooting Improving the print quality If you have a print quality problem, make a copy first (put a document on the scanner glass and press Start). If the printout looks good, the problem is probably not the machine. Check the interface cable connections or try printing a different document.
  • Page 78 33. 0 1 2 3 4  Put in a new drum unit. See Replacing the drum unit on page 39. Gray background  Make sure that you use paper that meets our specifications.
  • Page 79  Clean the corona wire inside the drum unit by sliding the green tab from left to right and right to left several times. Be sure to return the green tab to the home position (a). See Cleaning the corona wire on page 38.
  • Page 80  If the problem is not solved after printing a few pages, put in a new drum unit. (See Replacing the drum unit on page 39.) White lines, bands or ribbing across the page ...
  • Page 81 Do not use paper that has clips or staples because they will 0 1 2 3 4 scratch the surface of the drum.  If the unpacked drum unit is in direct sunlight or room light, the unit Black toner marks across the may be damaged. page ...
  • Page 82 Recommendation  Make sure that the paper or other print media is loaded properly in the paper tray and that the guides are not too tight or too loose against the paper stack. F G H A B C D E...
  • Page 83 Troubleshooting Examples of poor print quality Recommendation  Make sure that the two green envelope levers inside the back cover are pulled down when you print the envelope. Envelope creases Note When you have finished printing, open the back cover and reset...
  • Page 84 Examples of poor print quality Recommendation  Open the back cover and make sure that the two green envelope levers on the left and right hand sides are in the up position. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
  • Page 85 Turn the paper over in the paper tray, and print again. (Excluding letterhead paper) If the problems remains, switch the Anti-Curl Levers as follows: Open the back cover. Curled Lift the lever (1) and slide the two gray levers (2) in the direction of the arrow.
  • Page 86 Examples of poor print quality Recommendation  Lift up the output tray support flap (1). Curled...

  • Page 87: Machine Information

    Press OK. Press a or b to choose 5.Reset. Press OK. (For DCP-7065DN) Press a or b to choose 4.Machine Press a or b to choose the type of reset Info.. function you want to use. Press OK. Press OK.

  • Page 88: C Menu And Features

    Menu table on page 76. These pages list the level. menu selections and options. Press Menu Accept an option. and then press a or b to access the menus and program your machine. For example, to Exit the menu by set Copy Quality to Photo Quality pressing repeatedly.

  • Page 89: How To Access The Menu Mode

    Press OK when the option you want appears on the LCD. The LCD will then show the next menu level. Press a or b to scroll to your next menu selection. Press OK. When you have finished setting an option, the LCD will show Accepted.

  • Page 90: Menu Table

    Menu table The factory settings are shown in Bold with an asterisk. Choose & OK Choose & OK to accept to exit Level 1 Level 2 Level 3 Level 4 Options Descriptions Page — Sets the type of 1.General 1.Paper 1.Paper...
  • Page 91 Allows you to change 0.Local language) the LCD language for Language your country. See Advanced User's Guide. See Quick Setup Guide. The factory settings are shown in Bold with an asterisk. Level 1 Level 2 Level 3 Options Descriptions Page —...
  • Page 92 Adjusts the contrast 3.Contrast -nnnno+ for copies. -nnnon+ -nnonn+* -nonnn+ -onnnn+ See Advanced User's Guide. The factory settings are shown in Bold with an asterisk. Level 1 Level 2 Level 3 Options Descriptions Page — Prints a list of the 3.Printer...
  • Page 93 [000-255]. [000-255]. Enter the Gateway 4.Gateway [000-255]. [000-255] address. — Enter the Node 5.Node Name BRNXXXXXXXXXXXX name. — Chooses the WINS 6.WINS Auto* configuration mode. Config Static See Network User's Guide. The factory settings are shown in Bold with an asterisk.
  • Page 94 4.MAC address of the Address machine. — Restore all network 0.Network a Reset Reboot OK? settings to factory Reset b Exit a Yes b No default. See Network User's Guide. The factory settings are shown in Bold with an asterisk.
  • Page 95 Enable or Disable the 0.IPv6 IPv6 protocol. If you Off* want to use the IPv6 protocol, visit http://solutions. brother.com/ for more information. See Network User's Guide. The factory settings are shown in Bold with an asterisk.
  • Page 96 Mask [000-255]. [000-255]. Enter the Gateway 4.Gateway [000-255]. [000-255] address. Enter the Node 5.Node Name BRWXXXXXXXXXXXX name. Chooses the WINS 6.WINS Auto* configuration mode. Config Static See Network User's Guide. The factory settings are shown in Bold with an asterisk.
  • Page 97 — — You can easily 4.WPS w/PIN configure your Code wireless network settings using WPS with a PIN code. See Network User's Guide. The factory settings are shown in Bold with an asterisk.
  • Page 98 1.On wireless LAN Enable 2.Off* manually. — Restores all network 0.Network a Reset Reboot OK? settings to factory Reset b Exit a Yes b No default. See Network User's Guide. The factory settings are shown in Bold with an asterisk.
  • Page 99 — — You can check the 4.Drum Life percentage of a (For DCP-7060D) Drum life that remains available. 5.Drum Life (For DCP-7065DN) 6.Drum Life (For HL-2280DW) See Advanced User's Guide. The factory settings are shown in Bold with an asterisk.

  • Page 100: D Specifications

    Specifications General Note This chapter provides a summary of the machines’ specifications. For additional specifications visit http://www.brother.com/ for details. Printer Type Laser Print Method Electrophotography by semiconductor laser beam scanning Memory Capacity 32 MB 16 characters  2 lines LCD (liquid crystal...
  • Page 101 (268 mm) 15.95 in. 15.7 in. (405 mm) (398.5 mm) Weight With Consumables: (For DCP-7060D) 10.1 kg (22.3 lb) (For DCP-7065DN) 11.4 kg (25.1 lb) (For HL-2280DW) 10.3 kg (22.7 lb) Noise level Sound power Operating (For DCP-7060D) L d = 6.74 B (A) / (For DCP-7065DN / HL-2280DW) d = 6.81 B (A)

  • Page 102: Document Size

    50 F to 90.5 F (10 to 32.5 C) Temperature Operating: 32 F to 104 F (0 to 40 C) Storage: Humidity Operating: 20 to 80% (without condensation) Storage: 10 to 90% (without condensation) ADF (automatic document Up to 35 pages (Staggered) 20 lb (80 g/m...

  • Page 103: Print Media

    Paper Type Plain Paper or Recycled Paper (Automatic Duplex): For labels, we recommend removing printed pages from the output paper tray immediately after they exit the machine to avoid the possibility of smudging. 16 to 28 lb (60 to 105 g/m ) for duplex print.

  • Page 104: Copy

    Stacks or Sorts up to 99 pages Reduce/Enlarge 25% to 400% (in increments of 1%) Up to 600  600 dpi Resolution First Copy Out Time Less than 11 seconds (from Ready mode and standard tray) Ready At 25C (77F)

  • Page 105: Scanner

    Scanning Width Max. 8.27 in. (210 mm) Gray Scale 256 levels For the latest driver updates for the Mac OS X you are using, visit us at http://solutions.brother.com/. ® ® ® Maximum 1200  1200 dpi scanning with the WIA driver in Windows...

  • Page 106: Printer

    Up to 24 pages/minute (Letter size) (For DCP-7065DN and HL-2280DW) Up to 27 pages/minute (Letter size) First Print Out Time Less than 8.5 seconds (from Ready mode and standard tray) The print speed may vary depending on the type of document you print.

  • Page 107: Interfaces

    Wireless LAN IEEE 802.11 b/g (Infrastructure / Ad-hoc Mode) (HL-2280DW) Your machine has a Hi-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB 1.1 interface. Third-party USB ports are not supported. See Network (LAN) (DCP-7065DN / HL-2280DW) on page 97 and the Network User's Guide for detailed network...

  • Page 108: Computer Requirements

    Computer requirements Minimum System Requirements and Supported PC Software Functions Computer Platform & Processor Minimum Recommended Hard Disk Space to Supported Supported Operating System Minimum install Version Speed Software Interface Functions Drivers Applications ® ® ® 64 MB 256 MB...
  • Page 109 10.6.x Processor ® Internet Explorer 6.0 or greater. For WIA, 1200 x 1200 resolution. Brother Scanner Utility enables to enhance up to 19200 x 19200 dpi. Third-party USB ports are not supported. ® ® PaperPort™ 11SE supports Microsoft SP4 or higher for Windows 2000.

  • Page 110: Consumable Items

    Approx. 1,200 pages TN-420 (Letter) High-Yield Toner Cartridge: Approx. 2,600 pages TN-450 (Letter) Drum Unit DR-420 Approx. 12,000 pages (Letter) Approx. cartridge yield is declared in accordance with ISO/IEC 19752. Drum yield is approximate, and may vary by type of use.

  • Page 111: Network (Lan) (Dcp-7065Dn / Hl-2280Dw)

    Specifications Network (LAN) (DCP-7065DN / HL-2280DW) Note For details about the full Network specifications, see the Network User's Guide. You can connect your machine to a network for Network Printing and Network Scanning. Also included is Brother BRAdmin Light Network Management software.

  • Page 112: Index

    Index Accessories and supplies ......ii Envelopes ......12 ADF (automatic document feeder) Error messages on LCD ......44 using .............21 Drum Error ..........40 Apple Macintosh Drum Stop ..........40 See Software User's Guide Duplex Disabled ........45 Init Unable XX ........45 Jam Duplex ..........
  • Page 113 Scan ............ 6 Scanner glass using ............. 22 OPC drum ..........66 Serial number Out of Memory message ......46 how to find ....See inside front cover Service centers ..........i Paper ..........16 how to load ..........8 Toner cartridge in manual feed slot ......10 replacing ..........
  • Page 114 Warranties Canada ..........vi Notice-Disclaimer ........iii USA ............iv ® Windows See Software User's Guide World Wide Web ......... i Wireless Network See Quick Setup Guide and Network User's Guide...
  • Page 115 The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.
  • Page 116 Dollard-des-Ormeaux, QC, Canada H9B 3H6 Visit us on the World Wide Web http://www.brother.com/ These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will only support machines purchased in their own countries.

This manual is also suitable for:

Hl-2280dwDcp-7060dHl-2220Hl-2270dwHl 2240d

Table of Contents