Table of Contents
Advertisement
Connecting Power Cords
Connecting a CSS 11800 AC Power Cord
Connecting a CSS 11800 DC Power Cord
Warning
Cisco 11000 Series Content Services Switch Hardware Installation Guide
2-30
To connect an AC power cord to a CSS 11800:
Ensure that the CSS power switch is in the 0 (off) position.
1.
2.
Attach the power cord to the CSS by plugging the AC power cord connector
into the power receptacle at the front of the chassis as shown in
Figure 2-19 Connecting a CSS 11800 AC Power Cord
PS1
PS2
3.
Plug the power cord into a dedicated 3-wire grounding receptacle.
Switch on the power on the CSS.
4.
Before you install a DC power cord, see Appendix A,
power supply safety warnings.
The DC power supply cord requires 12 AWG wire. The CSS 11800 draws a
maximum of 25 amps.
Chapter 2
PS1 power switch
PS2 power switch
PS2 AC
power cord
PS1 AC
power cord
Specifications
Cabling the CSS
Figure
2-19.
for DC
78-15146-02
Advertisement
Table of Contents
Troubleshooting
