Troubleshooting - KitchenAid KFPM770 Instructions Manual
12 cups food processor
Hide thumbs
Also See for KFPM770:
- Instructions and recipes manual (64 pages) ,
- Instructions manual (85 pages) ,
- Service manual (51 pages)
Table of Contents
Advertisement
Available languages
Available languages
• If your Food Processor should fail
to operate, check the following:
– Make sure the work bowl and work bowl
cover are properly locked on the base,
and the large food pusher is inserted to
the maximum fill line on the feed tube
(approximately halfway down).
– See if the Food Processor is plugged
into a proper electrical outlet If it is,
unplug the Food Processor, then plug
it into the same outlet again.
Models KFPM770 & KFPM773
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
Models KFPW760 & KFPW763
WARNING
Fire Hazard
Do not use an extension cord.
Doing so can result in death
or fire.
Troubleshooting
– If the Food Processor still does not
• If your Food Processor should
– Make sure the raised-blade side of the
• If your Food Processor lid won't
– Make sure the disc is installed correctly,
• If the Food Processor shuts off
– The Food Processor may be overheated.
• If you have difficulty removing the
– Food particles are probably lodged in
If the problem cannot be corrected
with the steps in this section, see the
KitchenAid Warranty and Service section
on pages 23-26. Do not return the Food
Processor to the retailer – they do not
provide service.
17
work, check the fuse or circuit breaker
on the electrical circuit the Food
Processor is connected to and make
sure the circuit is closed.
fail to slice, shred, or cut when
using the disc:
disc is positioned face up on the disc
stem. The disc has a raised nub on the
top and grooves underneath to help
align it properly.
close when using the disc:
with the raised nub on top, and is
positioned properly on the disc stem.
while it is running:
If the motor exceeds a certain
temperature, it will automatically shut
off to prevent damage. This should
be an extremely rare occurrence. If it
happens, press the OFF Button and
wait 15 minutes for the Food Processor
to cool before resuming. If the Food
Processor still refuses to run, wait an
additional 15 minutes for the Food
Processor to cool.
food pusher from the feed tube:
the interlock system. To free the pusher,
soak the work bowl cover in warm
water or wash it in a dishwasher.
Hide quick links:
Advertisement
Chapters
Table of Contents
