Table of Contents
Advertisement
Creating RAID volumes
This section describes how to use the Intel
Configuration Utility to create RAID volumes.
To create RAID volumes, do as follows:
1. Turn on the computer.
2. During the startup, when a prompt to press Ctrl+I to enter the Configuration
3. The screen for Intel Rapid Storage Technology option ROM is displayed. Select
4. Using the up and down arrow keys, Tab keys, and Enter key select the RAID
5. Select "Create Volume" by pressing the Enter key. When the dialog box
6. Exit the Configuration Utility.
Deleting RAID volumes
This section describes how to use the Intel Rapid Storage Technology option ROM
Configuration Utility to delete RAID volumes.
To delete RAID volumes, do as follows:
1. Turn on the computer.
2. During the startup, when a prompt to press Ctrl+I to enter the Configuration
3. The screen for Intel Rapid Storage Technology option ROM is displayed. Select
4. When prompted, press Y key to confirm the deletion of the selected RAID
5. After deleting a RAID volume, you can:
Attention: If the Serial ATA item in the BIOS Setup Utility menu of the computer
you are servicing was set to AHCI when it was manufactured, then to create a
RAID array you must first enable RAID in BIOS, create RAID volume, and then
reinstall the operating system. All data on the hard disks will be erased during this
process. For more information, see "Creating RAID volumes."
72
ThinkPad T510, T510i, and W510 Hardware Maintenance Manual
Utility is displayed on the screen, press and hold the Ctrl key, and press the I
key.
"Create RAID Volume" and press Enter.
level and fill in other fields.
appears, press the Y key.
Attention: All existing data will be erased while the RAID volume is being
created.
Utility is displayed on the screen, press and hold the Ctrl key, and press the I
key.
the RAID volume to be deleted, and press Delete.
volume.
v Return to step 2 to delete additional RAID volume.
v See "Creating RAID volumes" for RAID volume creation.
v Use the arrow keys to select Exit and press Enter.
v Use the arrow keys to select Resetting disks to non-RAID, and press Enter.
®
Rapid Storage Technology option ROM
- Quick Links:
- Front View
Hide quick links:
Advertisement
Table of Contents
