Memory Card Reader/Writer FAQs
Can I use this drive with a USB hub or docking station?
Do not use this drive with a USB hub or docking station. The drive may not operate correctly
when connected to a USB hub or docking station.
Do I need to install drivers?
This product works with the standard drivers in current Microsoft® Windows® operating
systems. Install the Drive Letter Recognition Software from the CD-ROM to make sure the
special drive letters for this product.
My drive disappears when I take remove the memory card. How can I resolve this?
Please make sure you are not choosing to safely remove hardware when you take the
memory card out of the unit. The safely remove hardware option is to remove the drive itself,
not the memory card. To safely remove the memory stick: Do not remove a memory card
while the access indicator is blinking. Doing so may cause damage to the data stored on the
memory card. Wait about 30 seconds after the access indicator turns off before removing the
memory card. Pull the memory card straight out.
Can a MultiMediaCard and SD card be read at that same time?
MultiMediaCards and SD cards use the same slot. Therefore, only one card can be used at a
time.
How do I disconnect the drive from the computer?
Do not disconnect the drive from the computer while the access indicator is blinking. Doing
so may cause damage to the data stored on the memory card.
Click on the Safely remove Hardware icon on the task tray; this is located at the lower right
corner of the screen. Click on Safely remove USB mass Storage device Drives (E, F, G, H).
Make sure the message "The USB Mass Storage Device can now be safely removed from the
system" appears, and then disconnect the drive.