Screwless Model
Screwless Model
Screwless Model
Screwless Model
Screwless Model
Copyright © 2005 ASUSTeK COMPUTER INC.
All Rights Reserved.
Installing the power supply unit (PSU)
Installing the power supply unit (PSU)
Installing the power supply unit (PSU)
Installing the power supply unit (PSU)
Installing the power supply unit (PSU)
1 1 1 1 1
2 2 2 2 2
Slide the PSU into the slot
Locate the PSU slot.
until it snugly fits the
metal rail.
3 3 3 3 3
Secure with screws.
Installing a floppy disk drive (FDD)
Installing a floppy disk drive (FDD)
Installing a floppy disk drive (FDD)
Installing a floppy disk drive (FDD)
Installing a floppy disk drive (FDD)
1 1 1 1 1
2 2 2 2 2
Using a screwdriver, push
Insert the FDD into the bay.
the knock-down metal
Make sure the FDD holes
cover in and out of the
align with the chassis holes.
chassis until it is removed.
3 3 3 3 3
4 4 4 4 4
Secure the FDD with
Release the lock tabs on the
screws.
front bezel to disengage the
drive cover.
Removing the side cover and front bezel
Removing the side cover and front bezel
Removing the side cover and front bezel
Removing the side cover and front bezel
Removing the side cover and front bezel
1 1 1 1 1
2 2 2 2 2
Remove the screws on
Push the side cover towards
the rear panel.
the rear panel.
Installing an optical disk drive (ODD)
Installing an optical disk drive (ODD)
Installing an optical disk drive (ODD)
Installing an optical disk drive (ODD)
Installing an optical disk drive (ODD)
2 2 2 2 2
1 1 1 1 1
Insert the ODD into the bay.
Push the bay lock upward.
3 3 3 3 3
4 4 4 4 4
Align the ODD holes with
Release the lock tabs on
the bay holes, then push
the front bezel to
down the bay lock to
disengage the drive cover.
secure the ODD.
Installing an expansion card
Installing an expansion card
Installing an expansion card
Installing an expansion card
Installing an expansion card
1 1 1 1 1
2 2 2 2 2
Choose the slot that you
Align the card connector
want to use. Push to
with the slot, then press
unlock the lock tab.
firmly until the card is
Remove the metal cover
completely seated on the
opposite the slot that you
slot.
want to use.
4 4 4 4 4
3 3 3 3 3
Push the expansion card
Photo shows the card
lock on the rear panel to
seated on the slot.
secure the slot.
3 3 3 3 3
4 4 4 4 4
Release the side
Swing the front bezel in the
tabs that secure
direction of the arrow.
the front bezel to
Unhook the hinge-like tabs. Set the
the chassis.
front bezel aside.
Installing a hard disk drive (HDD)
Installing a hard disk drive (HDD)
Installing a hard disk drive (HDD)
Installing a hard disk drive (HDD)
Installing a hard disk drive (HDD)
1 1 1 1 1
2 2 2 2 2
1.
Push the bay lock
3 3 3 3 3
upward.
2.
Insert the HDD into the
bay.
3.
Align the HDD holes
with the bay holes,
then push down the
bay lock to secure the
HDD.
Reinstalling the side cover and front bezel
Reinstalling the side cover and front bezel
Reinstalling the side cover and front bezel
Reinstalling the side cover and front bezel
Reinstalling the side cover and front bezel
Hook the hinge-like
1 1 1 1 1
tabs to the holes on
the chassis. Swing
the front bezel in the
direction of the
arrow and push to
secure the front
bezel to the chassis.
2 2 2 2 2
3 3 3 3 3
Push the side cover towards
the front bezel.
Drive screws on the rear
panel.
E 2 0 7 0
E 2 0 7 0
E 2 0 7 0
E 2 0 7 0
E 2 0 7 0
T A / T M 5 S e r i e s
T A / T M 5 S e r i e s
T A / T M 5 S e r i e s
T A / T M 5 S e r i e s
T A / T M 5 S e r i e s