Table of Contents
Advertisement
General safety
Follow these rules to ensure general safety:
v Observe good housekeeping in the area of the machines during and after
v When lifting any heavy object:
v Do not perform any action that causes hazards to the customer, or that makes
v Before you start the machine, make sure that other service representatives and
v Place removed covers and other parts in a safe place, away from all personnel,
v Keep your toolcase away from walk areas so that other people will not trip over
v Do not wear loose clothing that can be trapped in the moving parts of a
v Insert the ends of your necktie or scarf inside clothing or fasten it with a
v Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your
v Wear safety glasses when you are hammering, drilling, soldering, cutting wire,
v After service, reinstall all safety shields, guards, labels, and ground wires.
v Reinstall all covers correctly before returning the machine to the customer.
v Fan louvers on the machine help to prevent overheating of internal components.
2
IdeaPad S9e, S10e, and S10 Hardware Maintenance Manual
maintenance.
1. Make sure that you can stand safely without slipping.
2. Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you attempt to
lift.
4. Lift by standing or by pushing up with your leg muscles; this action removes
the strain from the muscles in your back. Do not attempt to lift any object that
weighs more than 16 kg (35 lb) or that you think is too heavy for you.
the equipment unsafe.
the customer's personnel are not in a hazardous position.
while you are servicing the machine.
it.
machine. Make sure that your sleeves are fastened or rolled up above your
elbows. If your hair is long, fasten it.
nonconductive clip, about 8 centimeters (3 inches) from the end.
clothing.
Attention: Metal objects are good electrical conductors.
attaching springs, using solvents, or working in any other conditions that might
be hazardous to your eyes.
Replace any safety device that is worn or defective.
Do not obstruct fan louvers or cover them with labels or stickers.
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
