Related Manuals for Panasonic TH-85PF12UK
Summary of Contents for Panasonic TH-85PF12UK
- Page 2 (The ratings and appearance are subject to change without notice.) TH-85PF12U/K/W Dimensions (W x H x D) W 2,015 x H 1,195 x D 99 mm Package size W 2,194 x H 1,480 x D 549 mm Screen size 1899/1062/2167 mm Weight PDP: 125 kg / With the package: Approx.
- Page 3 Install the PDP in accordance with applicable laws and regulations of the destination country/region. The installation work must be carried out only by professionals. The power supply for this PDP must meet the requirements of the destination country. The rated power consumption is TBD. It is recommended that the PDP use a dedicated power line.
- Page 4 (Subject to change without notice due to improvements of the product specifications and/or design.)
- Page 5 (Subject to change without notice due to improvements of the product specifications and/or design.)
- Page 6 Stationary stand The height of the PDP bottom side is 62.5 mm from the stationary stand. The PDP can be set 50 mm higher to avoid interference between the PDP and the stand due to the attachment of a touch panel or for other reasons. At the higher position, the height of the PDP bottom side is 112.5 mm.
- Page 7 Stand specifications (Model No.: TY-ST85PF12) Dimensions: W 1,425 x H 1,413 to 1,606 x D 871 mm Weight: 75.0 kg Height adjustable to three levels 1,995 2,095 1,000 2,195 (Subject to change without notice due to improvements of the product specifications and/or design.)
- Page 8 Stand specifications (Model No.: TY-ST85P12) Dimensions: W 1,401 x H 727 x D 443 mm Weight: 55.0 kg (Subject to change without notice due to improvements of the product specifications and/or design.)
- Page 9 Fixing the PDP to a wall or post with wires Fixing with wire Fix the eye bolts on the rear of the PDP to a firm Wire ／ wall or post with strong wires. ／ ／ <Reference values> ／ Wire ／...
- Page 10 Wall mounting The installation work must be carried out only by When installing the PDP on a wall, change the stand professionals. hook at the center to the upper stand hook position. The marks denote the center of the PDP. Wall mounting dimensional tolerances Base bracket pitch (the part marked with *1): Stand specifications (Model No.: TY-WK85PV12)
- Page 11 Stand specifications (Model No.: TY-WK85PV12) Dimensions: W 1,420 x H 1,071 x D 150 mm Weight: Approx. 25.0 kg When installing the PDP on a wall, change the stand hook at the center to the upper stand hook position. Wall mounting The installation work must be carried out “V”...
- Page 12 Be sure to put the brackets' stoppers in place to prevent the PDP from coming off the brackets for safety reasons. [Landscape installation] [Landscape installation] (1) After hanging the PDP on the wall mount (1) After hanging the PDP on the wall mount brackets, remove the stopper screws, turn brackets, loosen the stopper screws, move the the stopper 180 degrees, and fasten it with...
- Page 13 Unit: mm...
- Page 14 Unit: mm...
- Page 15 The installation work must be carried out only by professionals. Panasonic assumes no responsibility for any problems resulting from faulty installation work. Hang the bracket from the ceiling with four or more wires that can withstand a heavy load. In addition, attach two or more wires to prevent the ceiling mount bracket from hitting people nearby in case that the bracket falls off.
- Page 16 This part is for This part is for the safety wire. the safety wire. Do not use it Do not use it for the bottom for the bottom stay wire. stay wire. This part is for the safety wire. Do not use it for the bottom stay wire.
- Page 17 This part is for This part is for the safety wire. the safety wire. Do not use it Do not use it for the bottom for the bottom stay wire. stay wire. This part is for the safety wire. Do not use it for the bottom stay wire.
- Page 18 Unit: mm Base Plate...
- Page 19 Stand specifications (Model No.: TY-CE85PS12) Weight: Approx. 32.0 kg...
- Page 20 Stand specifications (Model No.: TY-CE85PS12) Weight: Approx. 32.0 kg 0 degrees 5 degrees 10 degrees 15 degrees...
- Page 21 If the wires used are long, recalculate the load by adding the weights of the wires. Check with the builder (e.g. the construction JV) as to the strength of the section where the PDP is hung (e.g. steel frames, ceiling slab) to confirm that the section has adequate strength before starting the work.
- Page 22 Drawings and Earthquake Resistance Data (Reference)
- Page 23 Position of the center of gravity With the wall With the ceiling mount TH-85PF12 mount bracket bracket (Tilt: 0 degrees) W (mm) 2,015 H (mm) 1,195 D (mm) Weight (kg) Position of the center of gravity G (mm) * The weights and positions of the center of gravity shown above are provisional values currently available.
- Page 24 When attaching the PDP to the mounting bracket, be sure to use our specified stand hooks. It is not recommendable to use any bracket other than the dedicated ones. The panel or other parts of the PDP may break, leading to screen defects or increasing of the noise emission level.
- Page 25 TH-85PF12 fan airflow and quantity Air outlets 120-mm diameter: 1.8 m /min x 4 92-mm diameter: 1.0 m /min x 4 Air inlets 80-mm diameter: 0.7 m /min x 2 * The heat vent area and the fan quantity and positions are subject to change.
- Page 26 Finished package Total weight: 160 kg (PDP: 125 kg Packaging materials: 35 kg) Maximum number of stacks: 1 Bands Carton body Top pad Top cushioning 1,480 (Product) Parts box Bottom cushioning Carton bottom Paper tubes 2,194 Bottom skids Bottom pallet Included items Power cord Hexagonal wrench...