Appendix B
Using the Offline Diagnostic Monitor Menu
Disabling or Enabling Disk Check
Note
OL-5647-02
The Disk Options menu provides an option to disable or enable the running of
check disk. When you select this option, it toggles to disable check disk if the
option is currently enabled, or to enable check disk if the option is currently
disabled.
We do not recommend running a Flash disk with the Check Disk Disable option
selected.
For example, if check disk is currently enabled, to disable it:
Select option 3 from the Disk Options menu.
1.
Enter r to return to the Advanced Options menu.
2.
Enter r to return to the Offline DM Main menu.
3.
Select option 2 to display the boot configuration.
4.
When check disk is disabled, the CSS displays the following:
****************** Miscellaneous **********************
Check Disk is disabled
***************** IP/MAC Information ***************
IP Address:
10.3.6.58
Subnet Mask:
255.0.0.0
Gateway Address:172.16.11.1
MAC Address:
00-10-58-00-12-ca
***************** PRIMARY **************************
Boot Type:
DISK
Boot File:
sg0730002
***************** SECONDARY ************************
Boot Type:
DISK
Boot File:
sg0720104
Press <Enter> to continue...
If check disk is currently disabled, to reenable it:
Select option 3 from the Disk Options menu.
1.
Enter r to return to the Advanced Options menu.
2.
Enter r to return to the Offline DM Main menu.
3.
Cisco Content Services Switch Administration Guide
B-25