Chapter 1
Managing the CSS Software
Copying Core Dumps to a TFTP Server
Showing CSS Configurations
OL-5647-02
Use the copy core tftp command to copy a core dump to an TFTP server. This
command is available only in SuperUser mode.
The syntax for this command is:
copy core coredump_filename tftp ip_address_hostname filename
The variables are as follows:
coredump_filename - The name of the core dump on the CSS. Enter an
•
unquoted text string with no spaces and a maximum of 32 characters.
ip_address_hostname - The IP address or host name of the TFTP server to
•
receive the file. Enter an IP address in dotted-decimal notation (for example,
192.168.11.1) or in mnemonic host-name format (for example,
myhost.mydomain.com). If you wish to use a host name, you must first set up
a host table using the host command.
filename - The name you want to assign to the file on the TFTP server.
•
Include the full path to the file. Enter an unquoted text string with no spaces
and a maximum of 32 characters.
The CSS CLI provides a comprehensive set of show commands that display CSS
configurations. The show commands are mode-independent; that is, they are
available in each mode. The CSS does not show configuration default values in
the individual show output, even when you specify a CLI command to configure
a default value.
To display the list of show commands, enter:
(config)# show ?
This section includes the following topics:
Showing Software Information
•
Showing Hardware Information
•
Showing System Resources
•
Showing System Uptime
•
Showing Disk Information
•
Cisco Content Services Switch Administration Guide
Showing CSS Configurations
1-33