D-Link DCS-2210 User Manual
Full hd poe wireless n cube network camera
Hide thumbs
Also See for DCS-2210:
- Quick installation manual (57 pages) ,
- Quick install manual (13 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for D-Link DCS-2210
Summary of Contents for D-Link DCS-2210
-
Page 2: Table Of Contents
Technical Specifications ............57 Image Setup .................28 Technical Specifications ............58 Audio and Video ..............30 Contacting Technical Support ........60 Preset..................32 Motion Detection ...............34 Warranty ................61 Time and Date ..............35 Event Setup ................36 Registration ..............67 Application ................37 Add Server .................38 D-Link DCS-2210/2230 User Manual... - Page 3 Preface D-Link reserves the right to revise this publication and to make changes in the contents hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description October 13, 2011 DCS-2210/2230 Revision A1 with firmware version 1.00...
-
Page 4: Product Overview
Product Overview Product Overview Package Contents DCS-2210 or DCS-2230 Full HD PoE/Wireless N Cube Network Camera Camera stand CAT5 Ethernet cable Power adapter CD-ROM with User Manual and software Quick Installation Guide If any of the above items are missing, please contact your reseller. -
Page 5: Hardware Overview
Used to illuminate the camera's field of view at night Passive Infrared sensor for motion detect Camera Lens Records video of the surrounding area Microphone Records audio from the surrounding area WPS LED (DCS2230 only) WPS status indicator LED Speaker Audio output D-Link DCS-2210/2230 User Manual... -
Page 6: Rear
Hardware Overview Rear RJ45 connector for Ethernet (DCS-2210 support PoE which can also be used to Ethernet power the camera) Press this button, then press the WPS button on your router to set up a wireless WPS Button (DCS-2230 only) -
Page 7: Side
Hardware Overview Side Micro SD Card Slot Local storage for storing recorded image and video D-Link DCS-2210/2230 User Manual... -
Page 8: Configuration
Insert the DCS-2210/DCS-2230 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive. - Page 9 Configuration Click Yes to accept the License Agreement. To start the installation process, click Next. Note: The installation may take several minutes to finish. D-Link DCS-2210/2230 User Manual...
- Page 10 Configuration Click Finish to complete the installation. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE D-Link DCS-2210/2230 User Manual...
- Page 11 Click the Wizard button to continue. Enter the Admin ID and password. When logging in for the first time, the default Admin ID is admin with the password left blank. Click Next, to proceed to the next page. D-Link DCS-2210/2230 User Manual...
- Page 12 Select DHCP if your camera obtains an IP address automatically when it boots up. Select static IP if the camera will use the same IP address each time it is started. Click Next, to proceed to the next page. Take a moment to confirm your settings and click Restart. D-Link DCS-2210/2230 User Manual...
-
Page 13: Web-Based Configuration Utility
Configuration Web-based Configuration Utility This section explains how to configure your new D-Link Network Camera using the Web-based Configuration Utility. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled "Link"... - Page 14 This section shows your camera’s live video. You can select your video profile and view or operate the camera. For additional information about web configuration, please refer to the user manual included on the CD-ROM or the D-Link website. D-Link DCS-2210/2230 User Manual...
-
Page 15: D-Viewcam Setup Wizard
Configuration D-ViewCam Setup Wizard D-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the software to configure all the advanced settings for your cameras. D-ViewCam is a comprehensive management tool for IP surveillance. - Page 16 Configuration Click Finish to complete the installation. To start the D-ViewCam, select Start > All Programs > D-Link D-ViewCam > Main Console. For more detail operation of using D-ViewCam software, please refer to D-ViewCam Manual. D-Link DCS-2210/2230 User Manual...
-
Page 17: Live Video
Set a Storage Folder This control pad can be used to electronically pan, tilt, Control Pad and zoom within the camera's predefined view area, if Listen/Stop Listening one has been defined. Talk/Stop Talking Start/Stop Digital Output D-Link DCS-2210/2230 User Manual... - Page 18 The Language: You may select the interface language using this menu. ROI will pan from back and forth within the Stop Stops the camera ePTZ motion Preset Path Starts the camera's motion along the predefined path D-Link DCS-2210/2230 User Manual...
-
Page 19: Setup
Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the internet. Click Next to continue. Note: Select DHCP if you are unsure of which settings to choose. - Page 20 If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable DDNS and enter your host information. Click Next to continue. Enter a name for your camera and click Next to continue. D-Link DCS-2210/2230 User Manual...
- Page 21 If you have selected DHCP, you will see a summary of your settings, including the camera's IP address. Please write down all of this information as you will need it in order to access your camera. Click Apply to save your settings. D-Link DCS-2210/2230 User Manual...
-
Page 22: Motion Detection Setup Wizard
Please see the Motion Detection section on page 34 for information about how to configure motion detection. Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record motion. D-Link DCS-2210/2230 User Manual... - Page 23 Click Next to continue. Step 4 You have completed the Motion Detection Wizard. Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-2210/2230 User Manual...
-
Page 24: Network Setup
The primary domain name server translates names to IP addresses. Secondary DNS: The secondary DNS acts as a backup to the primary DNS. Enable UPnP: Enabling this setting allows your camera to be configured as a UPnP device on your network. D-Link DCS-2210/2230 User Manual... - Page 25 Entering a value of '0' indicates that the camera should not monitor bandwidth. Specifying other values will limit the camera's transfer speed to the specified number of kilobytes per second. D-Link DCS-2210/2230 User Manual...
-
Page 26: Wireless Setup(Dcs-2230 Only)
TKIP or AES encryption. If you use Open or Shared authentication, WEP encryption should be the setting. Key: If you use WEP, WPA-PSK, or WPA2-PSK authentication, enter the Key (also known as password) used for your wireless network. D-Link DCS-2210/2230 User Manual... -
Page 27: Dynamic Dns
DDNS account. Password: Enter the password used to connect to your DDNS server account. Timeout: Enter the DNS Timeout values you wish to use. Status: Indicates the connection status, which is automatically determined by the system. D-Link DCS-2210/2230 User Manual... -
Page 28: Image Setup
3 different custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture. Denoise: This setting controls the amount of noise reduction that will be applied to the picture. Brightness: Adjust this setting to compensate for backlit subjects. D-Link DCS-2210/2230 User Manual... - Page 29 This setting controls the amount of coloration, from grayscale to fully saturated. Sharpness: Specify a value from 0 to 8 to specify how much sharpening to apply to the image. Reset Default: Click this button to reset the image to factory default settings. D-Link DCS-2210/2230 User Manual...
-
Page 30: Audio And Video
Frame size, you will not be able to use the ePTZ function. Maximum frame rate: A higher frame rate provides smoother motion for videos, and requires more bandwidth. Lower frame rates will result in stuttering motion, and requires less bandwidth. D-Link DCS-2210/2230 User Manual... - Page 31 This setting controls the amount of gain applied to incoming audio to increase its volume. Audio out off: Selecting this checkbox will mute outgoing audio. Audio out volume level: This setting controls the amount of gain applied to outgoing audio to increase its volume. D-Link DCS-2210/2230 User Manual...
-
Page 32: Preset
Click this drop-down box to see a list of all the presets that have been created. You can select one, then click the GoTo button to change the displayed camera view to the preset. Clicking the Remove button will delete the currently selected preset. D-Link DCS-2210/2230 User Manual... - Page 33 Clicking the trash can button will remove the currently selected preset from the sequence. If you want to change the dwell time for a preset, select it from the list, enter a new dwell time, then click the Update button. D-Link DCS-2210/2230 User Manual...
-
Page 34: Motion Detection
Right clicking on the camera image brings up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously specified motion detection areas. D-Link DCS-2210/2230 User Manual... -
Page 35: Time And Date
Set the Date and Time Manually: This option allows you to set the time and date manually. Copy Your Computer's Time This will synchronize the time information from Settings: your PC. D-Link DCS-2210/2230 User Manual... -
Page 36: Event Setup
2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying. Note: You can add up to four events, five servers, and five media fields. D-Link DCS-2210/2230 User Manual... -
Page 37: Application
Snapshot, Video Clips Email, FTP To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action shall be performed when a trigger is activated. D-Link DCS-2210/2230 User Manual... -
Page 38: Add Server
Enter the configuration for the target e-mail server account. FTP: Enter the configuration for the target FTP server account. Network Storage: Specify a network storage device. Only one network storage device is supported. SD Card: Use the camera's onboard SD card storage. D-Link DCS-2210/2230 User Manual... -
Page 39: Add Media
You can set up to 7 post-event images to be taken. File name prefix: The prefix name will be added on the file name. Add date and time suffix to file Check it to add timing information as file name suffix. name: D-Link DCS-2210/2230 User Manual... - Page 40 This is the prefix that will be added to the filename of saved video clips. System log: Select this option to set the media type to system logs. This will save the event to the camera system log, but will not record any snapshots or video. D-Link DCS-2210/2230 User Manual...
-
Page 41: Add Event
Triggers an event when the system boots up. Network Lost: Triggers an event when the network connection is lost. Passive Infrared: Triggers an event when the PIR sensor is activated by moving infrared objects even in dark environment. D-Link DCS-2210/2230 User Manual... - Page 42 Select Always or enter the time interval. Trigger D/O: Select to trigger the digital output for a specific number of seconds when an event occurs. Server: Specify the location where the event information should be saved to. D-Link DCS-2210/2230 User Manual...
-
Page 43: Add Recording
Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please make sure your HDD has enough space, and it is better to not save other files in the same folder as recording files. D-Link DCS-2210/2230 User Manual... - Page 44 Size of each file for recording: File size for each recording file. You may input the value in the range of 200-5000. File Name Prefix: The prefix name will be added on the file name of the recording file(s). D-Link DCS-2210/2230 User Manual...
-
Page 45: Sd Card
Playback Recorded Video: If video files are stored on the SD card, click on the video folder and choose the video file you would like to view. Refresh: Reloads the file and folder information from the SD card. D-Link DCS-2210/2230 User Manual... -
Page 46: Advanced
N.O. stands for Normally Open. This means that the normal state of the circuit is open. Therefore events are triggered when the device status changes to "Closed." LED: You may specify whether or not to illuminate the LED on the side of the camera. D-Link DCS-2210/2230 User Manual... -
Page 47: Icr And Ir
The IR light will always be on. Sync: The IR light will turn on when the ICR sensor is on. Schedule: The IR light will turn on or off according to the schedule that you specify below. D-Link DCS-2210/2230 User Manual... -
Page 48: Https
Create a certificate request and install Status: Displays the status of the certificate. Note: The certificate cannot be removed while the HTTPS is still enabled. To remove the certificate, you must first uncheck Enable HTTPS secure connection. D-Link DCS-2210/2230 User Manual... -
Page 49: Access List
Configuration Access List Here you can set access permissions for users to view your DCS-2210/2230. Allow list: The list of IP addresses that have the access right to the camera. Start IP address: The starting IP Address of the devices (such as a computer) that have permission to access the video of the camera. -
Page 50: Maintenance
Enable OSD: Select this option to enable the On-Screen Display feature for your camera. Label: Enter a label for the camera. Show Time: Select this option to enable the time-stamp display on the video screen. D-Link DCS-2210/2230 User Manual... -
Page 51: Backup And Restore
Load Configuration. Restore to Factory Default: You may reset your camera and restore the factory settings by clicking Restore Factory Defaults. Reboot Device: This will restart your camera. D-Link DCS-2210/2230 User Manual... -
Page 52: Firmware Upgrade
Configuration Firmware Upgrade The camera's current firmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available firmware version. To upgrade the firmware on your DCS-2210/2230, please download and save the latest firmware version from the D-Link Support Page to your local hard drive. -
Page 53: Status
Configuration Status Device Info This page displays detailed information about your device and network connection. D-Link DCS-2210/2230 User Manual... -
Page 54: Logs
Configuration Logs This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-2210/2230 User Manual... -
Page 55: Help
Configuration Help This page provides helpful information regarding camera operation. D-Link DCS-2210/2230 User Manual... -
Page 56: Appendix
DC 5 V Output / Max. 100 mA Internal 5V Power External 3~12V Power DC Power 5V DC Power 5V DC Power 3V~12V N.C / N.O N.C / N.O Reed switch Reed switch Diode Diode 100 mA 100 mA ALARM ALARM D-Link DCS-2210/2230 User Manual... -
Page 57: Technical Specifications
ƒ Micro SD card slot Network IPv4, TCP/IP, UDP, ICMP, DHCP Client, NTP Client (D-Link), DNS Client, DDNS Client (D-Link), SMTP Client, FTP Client, HTTP / HTTPS, Network Protocols Samba Client, PPPoE, UPnP Port Forwarding, RTP / RTSP/ RTCP, IP filtering, 3GPP, IGMP, ONVIF Compliant ƒ... -
Page 58: Technical Specifications
ƒ Viewing of up to 32 cameras on one screen ƒ Scheduled motion triggered, or manual recording options General Power Input 5 V DC 1.2 A, 50/60 Hz, PoE ( DCS-2210 only ) Max. Power DCS-2210: 3.5 watts Consumption DCS-2230: 4 watts Operating 0 to 40 ˚C (32 to 104 ˚F) - Page 59 Appendix DCS-2210/2230 Dimensions 38.7 D-Link DCS-2210/2230 User Manual...
-
Page 60: Contacting Technical Support
• Hardware Revision (located on the label on the bottom of the Network Camera (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the Network Camera). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues. -
Page 61: Warranty
Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. - Page 62 D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s...
- Page 63 • USA residents send to 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.
- Page 64 While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.
- Page 65 No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto.
- Page 66 The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office.
-
Page 67: Registration
Registration Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 October 13, 2011 D-Link DCS-2210/2230 User Manual...