Undoing A Command Or Feature - Cisco AS5350XM Configuration Manual
Universal gateways software configuration guide
Hide thumbs
Also See for AS5350XM:
- Installation manual (98 pages) ,
- Quick start manual (69 pages) ,
- Installation manual (104 pages)
Table of Contents
Advertisement
Exploring Cisco IOS Software
Command
Step 7
Router(config-controller)# ds0-group 1 timeslots ?
ds0-group
Step 8
Router(config-controller)# ds0-group 1 timeslots
1-24 ?
service
type
Step 9
Router(config-controller)# ds0-group 1 timeslots
1-24 type ?
e&m-fgb
e&m-fgd
e&m-immediate-start
fxs-ground-start
fxs-loop-start
sas-ground-start
sas-loop-start
Step 10
Router(config-controller)# ds0-group 1 timeslots
1-24 type e&m-fgb ?
dtmf
mf
service
<cr>
Step 11
Router(config-controller)# ds0-group 1 timeslots
1-24 type e&m-fgb dtmf ?
dnis
service
<cr>
Undoing a Command or Feature
If you want to undo a command you entered or disable a feature, enter the keyword no before most
commands; for example, no ip routing.
Saving Configuration Changes
Enter the copy running-config startup-config command to save your configuration changes to
nonvolatile random-access memory (NVRAM) so that they are not lost if there is a system reload or
power outage. For example:
Router# copy running-config startup-config
Building configuration...
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
8
<1-24>
List of timeslots which comprise the
Specify the type of service
Specify the type of signaling
E & M Type II FGB
E & M Type II FGD
E & M Immediate Start
FXS Ground Start
FXS Loop Start
SAS Ground Start
SAS Loop Start
DTMF tone signaling
MF tone signaling
Specify the type of service
DNIS addr info provisioned
Specify the type of service
Understanding Basic Hardware Architecture and Cisco IOS Software
Purpose
Displays the range for the timeslot
option. Specify a time slot range of
values from 1 to 24. You can specify time
slot ranges (for example, 1-24),
individual time slots separated by
commas (for example 1, 3, 5), or a
combination of the two (for example 1-3,
8, 17-24). The 16th time slot is not
specified in the command line, because it
is reserved for transmitting the channel
signaling.
Displays the two commands (service and
type) available for the time slots.
Lists supported signaling types.
Displays the types of channel-associated
signaling available for the e&m-fgb
type.
Displays the options supported for the
DTMF tone signaling option.
- Quick Links:
- Using the Cli
- Managing Ports
Hide quick links:
Advertisement
Table of Contents
