Table of Contents
Advertisement
Chapter 1
Installing and Setting Up the PIX 515E Security Appliance
Step 4
Step 5
Step 6
Step 7
Note
What to Do Next
78-17645-01
In the window that requires you to choose the method you want to use to run
c.
the ASDM software, choose either to download the ASDM launcher or to run
the ASDM software as a Java applet.
In the dialog box that requires a username and password, leave both fields empty.
Press Enter.
Click Yes to accept the certificates. Click Yes for all subsequent authentication
and certificate dialog boxes.
ASDM starts.
From the Wizards menu, choose Startup Wizard.
Follow the instructions in the Startup Wizard to set up your security appliance.
For information about any field in the Startup Wizard, click Help at the bottom
of the window.
Based on your network security policy, you should also consider configuring the
security appliance to deny all ICMP traffic through the outside interface or any
other interface that is necessary. You can configure this access control policy
using the icmp command. For more information about the icmp command, see the
Cisco Security Appliance Command
Next, configure the security appliance for your deployment using one or more of
the following chapters:
To Do This ...
Configure the security appliance to
protect a DMZ web server
Configure the security appliance for
remote-access VPN
Configure the security appliance for
Site-to-Site VPN
Reference.
See ...
Chapter 2, "Scenario: DMZ
Configuration"
Chapter 3, "Scenario: IPsec
Remote-Access VPN Configuration"
Chapter 4, "Scenario: Site-to-Site
VPN Configuration"
PIX 515E Security Appliance Getting Started Guide
What to Do Next
1-9
- Quick Links:
- Starting Asdm
Hide quick links:
Advertisement
Table of Contents
