Installing An Ac-Input Power Supply - Cisco 7600-SIP-400 - SPA Interface Processor 400 Installation Manual
7600 series
Hide thumbs
Also See for 7600-SIP-400 - SPA Interface Processor 400:
- Hardware installation manual (172 pages)
Table of Contents
Advertisement
Removing and Replacing the Power Supply
Figure 5-7
If the power supply bay is to remain empty, install a blank power supply filler plate (Cisco
Step 6
part number 800-16727-01 for the Cisco 7603 router, 800-19193-01 for the Cisco 7606 router,
800-28533-01 for the Cisco 7606-S router, and 700-03104-01 for the Cisco 7609 and Cisco 7613
routers) over the opening and secure it with the captive installation screws.
Installing an AC-Input Power Supply
This section covers the AC-input power supply installation procedure for the Cisco 7600 series routers.
Warning
This product requires short-circuit (over current) protection, to be provided as part of the building
installation. Install only in accordance with national and local wiring regulations.
Follow these steps to install an AC-input power supply:
Ensure that the system (earth) ground connection has been made. For ground connection instructions,
Step 1
see the
If necessary, remove the blank power supply filler plate from the chassis power supply bay opening by
Step 2
loosening the captive installation screws.
If your power supply has a power switch (see
Step 3
position.
Cisco 7600 Series Router Installation Guide
5-8
Cisco 7604, Cisco 7606, Cisco 7606-S Routers—Handling an AC-Input Power Supply
"System Ground Connection" section on page
Chapter 5
Removal and Replacement Procedures
3-19.
Figure
5-4), verify that the power switch is in the Off (0)
OL-4503-26
- Quick Links:
- Cisco 7606 Router
- Cisco 7606-S Router
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
