§ Windows 98/98se Installation Guide Contents: Section 1: Minimum System Requirements Section 2: Installing the DSB-650TX Section 3: Windows XP Driver Installation Section 4: Windows 2000 Driver Installation Section 5: Windows Me Driver Installation Section 6: Windows 98/98SE Driver Installation Section 7: Features &...
Page 2
This is the narrow end of the cable. Type A § Plug the “B” connector of the USB cable into the DSB-650TX. This is the larger Type B end of the cable. § Connect one end of a straight-through Ethernet cable to the RJ-45 port of the DSB-650TX.
Windows XP Driver Installation § Insert the DSB-650TX Driver Disk into your Floppy Drive. § The “Found New Hardware ” window will appear. § Click “Next”. § Click “Install from a list or specific location (Advanced) ”, then click “Next.”...
Page 4
§ Insert the driver disk. Select “Search removable media (floppy, CD-ROM…)” and then click “Next.” § Click “Finish” § The installation is complete.
Windows 2000 Driver Installation § Insert the DSB-650TX Driver Disk into your Floppy Drive. § The “Found New Hardware Wizard” will appear § Click “Next”. § Select “Search for a suitable driver for my device (recommended)”. Insert the driver disk into the floppy disk drive and click “Next”.
Page 6
§ Select “Floppy disk drives” and then click “Next”. § Click “Next” to install the driver. § Click “Finish” to complete the installation.
Windows Me Driver Installation § Insert the DSB-650TX Driver Disk into your Floppy Drive. § The “Found New Hardware Wizard” will appear. § Insert the driver disk into the floppy disk drive. Select “Automatic search for a better driver (Recommended) ” and then click “Next”.
Windows 98/98SE Driver Installation § Insert the DSB-650TX Driver Disk into your Floppy Drive. § The “Found New Hardware Wizard” will appear. § Insert the driver disk into your floppy disk drive. Click “Next”. § Select “Search for the best driver for your device (Recommended) ”.
Page 9
§ Select “Floppy disk drives”. Click “Next”. § Click “Next” to continue.
Page 10
§ Click “Finish”. § Click “Yes” to restart your computer and complete the installation.
The DSB-650TX has two LED indicators. The Link LED indicates that there is an active connection between the DSB-650TX and the network. § The Link LED is green when the DSB-650TX is operating at 100Mbps. § The Link LED is amber when the DSB-650TX is operating at 10Mbps.
Tips & Technical Support Tips § When inserting the DSB-650TX into the USB port of your computer, make sure that you insert it securely. § For best performance, use certified CAT5 Fast Ethernet cable. § Remember that you must connect a CAT5 Fast Ethernet cable from the DSB-650TX to a switch or broadband gateway to connect to your network.