Appendix C
Command Reference
Example
The following command shuts down the appliance:
shutdown
start
To start one or more of the ACS services, use the start command:
start [service name(s)]
Syntax Description
This command uses as an argument the name of the service or services to be started.
Usage Guidelines
Use the start command to start any ACS service. You can determine the status of each service by using
the show command. For more information, see
page
Example
The following command starts the CSAuth and CSAgent services:
restart csauth csagent
stop
To stop one or more of the ACS services, use the stop command:
stop [service name(s)]
Services subject to this command are halted until restarted, which may interfere with AAA services.
Note
When you stop the CSAgent service, not only does the ACS SE stop CSAgent, but it also changes the
Note
startup type to manual. This action has the effect of keeping it stopped; even after reboot. Likewise,
starting CSAgent resets the startup type to automatic.
Syntax Description
This command uses as an argument the name of the service or services to be stopped.
Usage Guidelines
Use the stop command to stop any ACS service. You can determine the status of each service by using
the show command. For more information, see
Console, page
OL-9969-03
4-5.
4-4.
Starting Solution Engine Services From a Serial Console,
Stopping Solution Engine Services From a Serial
Installation Guide for Cisco Secure ACS Solution Engine 4.1
Commands
C-15