Connecting An Eva8400 2C18D Rack To A 0C9D Expansion Rack - HP 6400/8400 Reference Manual

Enterprise virtual array expansion rack

Hide thumbs Also See for 6400/8400:

Table of Contents

DP1-A on controller B connects to P2 (I/O-A) on the bottom disk enclosure in the first loop

(main rack).

DP2-A on controller B connects to P2 (I/O-A) on the bottom disk enclosure in the second loop

(main rack).

DP3-A on controller B connects to P2 (I/O-A) on the bottom disk enclosure in the third loop

(main rack).

DP1-B on controller B connects to P1 (I/O-B) on the top disk enclosure in the first loop (expansion

rack).

DP2-B on controller B connects to P1 (I/O-B) on the top disk enclosure in the second loop (ex-

pansion rack).

DP3-B on controller B connects to P1 (I/O-B) on the top disk enclosure in the third loop (expan-

sion rack).

Disk enclosures

P1 (I/O-A) on the top disk enclosure in the first loop (main rack) goes to P2 (I/O-A) on the

bottom disk enclosure in the first loop (expansion rack).

P1 (I/O-B) on the top disk enclosure in the first loop (main rack) goes to P2 (I/O-B) on the

bottom disk enclosure in the first loop (expansion rack).

P1 (I/O-A) on the top disk enclosure in the second loop (main rack) goes to P2 (I/O-A) on the

bottom disk enclosure in the second loop (expansion rack).

P1 (I/O-B) on the top disk enclosure in the second loop (main rack) goes to P2 (I/O-B) on the

bottom disk enclosure in the second loop (expansion rack).

P1 (I/O-A) on the top disk enclosure in the third loop (main rack) goes to P2 (I/O-A) on the

bottom disk enclosure in the third loop (expansion rack).

P1 (I/O-B) on the top disk enclosure in the third loop (main rack) goes to P2 (I/O-B) on the

bottom disk enclosure in the third loop (expansion rack).

Connecting an EVA8400 2C18D rack to a 0C9D expansion rack

For reference,

Connecting the main rack to the expansion rack

Figure 26

shows a fully cabled EVA8400 2C18D configuration.

Table of Contents

Storageworks 6400 Storageworks 8400