Fsck - Cisco 3020 - Catalyst Blade Switch Command Reference Manual
Cisco catalyst blade switch 3020 for hp command reference, rel. 12.2(25)sef1
Hide thumbs
Also See for 3020 - Cisco Catalyst Blade Switch:
- Configuration manual (712 pages) ,
- Release note (54 pages) ,
- Getting started manual (37 pages)
Table of Contents
Advertisement
Appendix A
Cisco Catalyst Switch 3020 for HP Boot Loader Commands
fsck
Use the fsck boot loader command to check the file system for consistency.
Syntax Description
-test
-f
filesystem:
Defaults
No file system check is performed.
Command Modes
Boot loader
Command History
Release
12.2(25)SEF
Usage Guidelines
To stop an in-progress file system consistency check, disconnect the switch power and then reconnect
the power.
Examples
This example shows how to perform an extensive file system check on flash memory:
switch: fsck -test flash:
OL-8916-01
fsck [-test | -f] filesystem:
(Optional) Initialize the file system code and perform extra POST on flash memory.
An extensive, nondestructive memory test is performed on every byte that makes up
the file system.
(Optional) Initialize the file system code and perform a fast file consistency check.
Cyclic redundancy checks (CRCs) in the flashfs sectors are not checked.
Alias for a flash file system. Use flash: for the system board flash device.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3020 for HP Command Reference
fsck
A-11
Advertisement
Table of Contents
