Cisco 9124 - MDS Fabric Switch User Manual page 27

Fabric switch for hp c-class bladesystem

Hide thumbs Also See for 9124 - Cisco MDS Fabric Switch:

Table of Contents

10.Enter a new admin password.

switch(boot)(config)# admin-password <new password>

switch(boot)(config)# exit

switch(boot)#

1 1.

View the system image in bootflash.

switch(boot)# dir bootflash:

For example: m9100-s2ek9-mz.3.1.3a.bin

12.

Load the system image.

switch(boot)# load bootflash:system_image

For example: load bootflash:m9100-s2ek9-mz.3.1.3a.bin

13.

Verify that you now see the Cisco MDS 9124e Switch login prompt, switch login#.

14.

If necessary, reset the SNMP admin password after logging in to the switch, as in the following

example:

switch# config t

switch(config)# snmp-server user admin auth md5 <new password>

switch(config)# exit

switch(config)# copy run start

Refer to the

Cisco MDS 9000 Family Fabric Manager Configuration Guide

9000 Family CLI Configuration Guide

for detailed instructions.

Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem

and the

Cisco MDS

Table of Contents

Show Quick Links

Table of Contents