Cisco 9124 - MDS Fabric Switch User Manual page 19
Fabric switch for hp c-class bladesystem
Hide thumbs
Also See for 9124 - Cisco MDS Fabric Switch:
- Configuration manual (1484 pages) ,
- Troubleshooting manual (560 pages) ,
- Installation manual (108 pages)
Table of Contents
Advertisement
1.
Locate the appropriate interconnect bay in the rear of the enclosure per the HP BladeSystem
c7000 Enclosure setup and installation guide provided with your enclosure.
2.
Remove the slot cover, if installed.
IMPORTANT:
Populate all enclosure I/O bays with the appropriate component; for example a switch, Pass-Thru, or
one of the blank panels provided with the enclosure.
CAUTION:
Properly ground yourself before handling the switch.
3.
Press the handle latch to release the installation handle. See
Figure 4
Releasing the installation handle
Table 6
Release mechanism components
Item
Description
1
Installation handle in latched position
2
Handle latch
3
Installation handle released
4.
Align the Cisco MDS 9124e Fabric Switch with the appropriate interconnect bay according to
your enclosure's specific configuration.
5.
Push firmly into the interconnect bay. See
scale: 2/3" = 1"
!
Figure
Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem
Figure 4
and
2
1
2 0
1 9
1 8
1 7
3
5.
Table
6.
19
Hide quick links:
Advertisement
Table of Contents
