hit counter script
NEC NP-VE281 User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Projector
  5. NP-VE281
  6. User manual

NEC NP-VE281 User Manual

2800-lumen high-brightness mobile projector
Hide thumbs Also See for NP-VE281:
Table of Contents

Advertisement

Quick Links

See also: Command Manual , Installation Manual
Portable Projector
VE280X/VE281X/VE282X/
VE280/VE281/VE282
User's Manual
The VE280X, VE282X, VE280 and VE282 are not distributed in North America.
Model No.:
NP-VE280X, NP-VE281X, NP-VE282X
NP-VE280, NP-VE281, NP-VE282

Advertisement

Table of Contents
loading

Related Manuals for NEC NP-VE281

Summary of Contents for NEC NP-VE281

  • Page 1 Portable Projector VE280X/VE281X/VE282X/ VE280/VE281/VE282 User’s Manual The VE280X, VE282X, VE280 and VE282 are not distributed in North America. Model No.: NP-VE280X, NP-VE281X, NP-VE282X NP-VE280, NP-VE281, NP-VE282...
  • Page 2 Ver.1/07/12 • DLP is a trademark of Texas Instruments. • IBM is a trademark or registered trademark of International Business Machines Corporation. • Macintosh, Mac OS X and PowerBook are trademarks of Apple Inc., registered in the U.S. and other countries. • Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • MicroSaver is a registered trademark of Kensington Computer Products Group, a division of ACCO Brands. • Virtual Remote Tool uses WinI2C/DDC library, © Nicomsoft Ltd. • HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. • Blu-ray is a trademark of Blu-ray Disc Association. • Other product and company names mentioned in this user’s manual may be the trademarks or registered trademarks of their respective holders. NOTES (1) The contents of this user’s manual may not be reprinted in part or whole without permission. (2) The contents of this user’s manual are subject to change without notice. (3) Great care has been taken in the preparation of this user’s manual; however, should you notice any questionable points, errors or omissions, please contact us. (4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.

  • Page 3: Safety Cautions

    Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit. This symbol alerts the user that important information concerning the operation and maintenance of this unit has been provided. The information should be read carefully to avoid problems. WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE PRONGS CAN BE FULLY INSERTED. DOC Compliance Notice (for Canada only) This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. WARNING TO CALIFORNIA RESIDENTS: Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. Disposing of your used product EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This...

  • Page 4: Important Safeguards

    Important Information RF Interference (for USA only) WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. Important Safeguards These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings.
  • Page 5 Important Information Place the projector in a horizontal position The tilt angle of the projector should not exceed 5 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically. 5˚ Fire and Shock Precautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall. • Do not try to touch the exhaust vent on the front side as it can become heated while the projector is turned on and immediately after the projector is turned off. • Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your projector. If something should fall into your projector, disconnect it immediately and have the object removed by a qualified service personnel.

  • Page 6: Remote Control Precautions

    Important Information - If the projector does not operate normally when you follow the instructions described in this user's manual. - If the projector has been dropped or the cabinet has been damaged. - If the projector exhibits a distinct change in performance, indicating a need for service. • Disconnect the power cord and any other cables before carrying the projector. • Turn off the projector and unplug the power cord before cleaning the cabinet. • Turn off the projector and unplug the power cord if the projector is not to be used for an extended period of time. CAUTION • Do not use the tilt-foot for purposes other than originally intended. Misuses such as using the tilt foot to carry or hang (from the wall or ceiling) the projector can cause damage to the projector. • Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside the soft case could be damaged. • Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select [SETUP] → [OPTIONS(1)] → [FAN MODE] → [HIGH].) • Do not turn off the AC power for 60 seconds after the lamp is turned on and while the POWER indicator is blinking green. Doing so could cause premature lamp failure. • Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal projector operation. Use caution when picking up the projector. Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity.
  • Page 7 Important Information Note for US Residents The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws. Health precautions to users viewing 3D images Before viewing, be sure to read health care precautions that may be found in the user’s manual included with your LCD shutter eyeglasses or your 3D compatible content such as DVDs, video games, computer's video files and the like. To avoid any adverse symptoms, heed the following: - Do not use LCD shutter eyeglasses for viewing any material other than 3D images. - Allow a distance of 2 m/7 feet or greater between the screen and a user. Viewing 3D images from too close a distance can strain your eyes. - Avoid viewing 3D images for a prolonged period of time. Take a break of 15 minutes or longer after every hour of viewing. - If you or any member of your family has a history of light-sensitive seizures, consult a doctor before viewing 3D images. - While viewing 3D images, if you get sick such as nausea, dizziness, queasiness, headache, eyestrain, blurry vision, convulsions, and numbness, stop viewing them. If symptoms still persist, consult a doctor. - View 3D images from the front of the screen. Viewing from an angle may cause fatigue or eyestrain. About High Altitude mode • If you use the projector at altitudes approximately 1200 meters/4000 feet or higher, you are recommended to set [FAN MODE] to [HIGH ALTITUDE]. Failure to do so may cause the projector to overheat , resulting in malfunction.

  • Page 8: Table Of Contents

    Table of Contents Important Information ....................i 1. Introduction ......................1 What’s in the Box? ......................1 Introduction to the Projector ...................2 Congratulations on Your Purchase of the Projector ..........2 Features you'll enjoy: ....................2 About this user's manual ...................3 Part Names of the Projector ...................4 Front/Top ........................4 Rear ..........................4 Top Features ......................5 Terminal Panel Features ..................6 Part Names of the Remote Control ................7 Battery Installation ....................8 Remote Control Precautions ..................8 Operating Range for Wireless Remote Control ............8 2. Installation and Connections ..............9 Setting Up the Screen and the Projector ................9 Selecting a Location ....................9...
  • Page 9 Table of Contents 4. Convenient Features ..................28 Turning off the Image and Sound .................28 Freezing a Picture ......................28 Enlarging a Picture .......................28 Changing Eco Mode .....................29 Checking Energy-Saving Effect [CARBON METER] ............30 Using the Optional Remote Mouse Receiver (NP01MR) ..........31 Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool) ..33 Viewing 3D Images .......................39 5. Using On-Screen Menu .................43 Using the Menus ......................43 Menu Elements ......................44 List of Menu Items ......................45 Menu Descriptions & Functions [SOURCE] ..............46 Menu Descriptions & Functions [ADJUST] ..............47 Menu Descriptions & Functions [SETUP] ..............53 Menu Descriptions & Functions [INFO.] ...............62 Menu Descriptions & Functions [RESET] ..............64 6.

  • Page 10: Important Information

    What’s in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector. Projector Power cord Computer cable (VGA) Remote control Batteries (AAAx2) (US: 7N080236) (7N520073) (7N900924) (Asia: 7N080022) (Brazil: 7N080520) For North America only Limited warranty Quick Setup Guide (7N8N3101) NEC Projector CD-ROM Important Information (7N8N3091) User’s manual (7N951841)

  • Page 11: Introduction To The Projector

    1. Introduction Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Congratulations on Your Purchase of the Projector This DLP projector is one of the very best projectors available today. The projector enables you to project precise ® images up to 300 inches (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, DVD player or document camera. You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen, and the projector can be permanently mounted on a ceiling*1. The remote control can be used wirelessly. *1 Do not attempt to mount the projector on a ceiling yourself. The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury. In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes. Please consult your dealer for more information. Features you'll enjoy: • Quick start & Quick Power Off 7 seconds after turning on the power, the projector is ready to display PC or video images. The projector can be put away immediately after the projector is powered down. No cool down period is required after the projector is turned off from the remote control or cabinet control panel. • Direct Power Off The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even when projecting an image) by disconnecting the AC power supply.

  • Page 12: About This User's Manual

    1. Introduction • Preventing unauthorized use of the projector Enhanced smart security settings for cabinet control panel lock, security slot to help prevent unauthorized access, adjustments and theft deterrence. • 3D images supported The projector provides 3D images to a user wearing optional DLP Link LCD shutter eyeglasses, NP02GL ® About this user's manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user's manual. This may save you time later on. At the beginning of each section of the manual you'll find an overview. If the section doesn't apply, you can skip it. In this user's manual the drawings of the projector show an example of VE281X.

  • Page 13: Part Names Of The Projector

    1. Introduction Part Names of the Projector Front/Top Zoom Lever (→ page 22) Controls Focus Ring (→ page 5) (→ page 22) Remote Sensor (→ page 8) Exhaust Vent Heated air is exhausted from here. Intake Vent Lens Adjustable Tilt Foot (→...

  • Page 14: Top Features

    1. Introduction Top Features 4. LAMP Indicator (→ page 66, 67) 1. POWER Button (ON / STAND BY) ( ) (→ page 17, 5. AUTO ADJ. Button (→ page 25) 2. POWER Indicator (→ page 16, 17, 26, 67) 6. SOURCE Button (→ page 19) 3. STATUS Indicator (→ page 67)

  • Page 15: Terminal Panel Features

    1. Introduction Terminal Panel Features VE280X/VE280 1. COMPUTER IN/ Component Input Connector (Mini 3. VIDEO IN Connector (RCA) (→ page 14) D-Sub 15 Pin) (→ page 12, 13) 4. AUDIO IN Mini Jack (Stereo Mini) (→ page 12, 13, 2. PC CONTROL Port (D-Sub 9 Pin) (→ page 75) Use this port to connect a PC or control system. This enables you to control the projector using serial communication protocol. If you are writing your own program, typical PC control codes are on page 75. VE281X/VE281 VE282X/VE282 (VE281X/VE281 only) (VE282X/VE282 only) 1. COMPUTER IN/ Component Input Connector (Mini 3. VIDEO IN Connector (RCA) (→ page 14) D-Sub 15 Pin) (→ page 12, 13) 4. AUDIO IN Mini Jack (Stereo Mini) (→ page 12, 13,...

  • Page 16: Part Names Of The Remote Control

    1. Introduction Part Names of the Remote Control 10. HDMI Button (→ page 19) (not available on VE280X and VE280.) 11. VIEWER Button (not available on this series of projectors) 12. NETWORK Button (not available on this series of projectors) 13. USB DISPLAY Button (not available on this series of projectors) 14. ID SET Button (not available on this series of projectors.) 15. Numeric Keypad Button/CLEAR Button (not available on this series of projectors.) 16. FREEZE Button (→ page 28) 17. AV-MUTE Button (→ page 28) 18. MENU Button (→ page 44) 19. EXIT Button (→ page 44) Button (→ page 32, 44) 21. ENTER Button (→ page 44) 22. D-ZOOM (+)(–) Button (→ page 28) 23. MOUSE L-CLICK Button* (→ page 32) 1. Infrared Transmitter 24. MOUSE R-CLICK Button* (→ page 8) (→ page 32) 2. POWER ON Button 25. PAGE Button*...

  • Page 17: Battery Installation

    1. Introduction Battery Installation Press firmly and slide the battery Install new batteries (AAA). Ensure Slip the cover back over the cover off. that you have the batteries’ polarity batteries until it snaps into place. (+/−) aligned correctly. Do not mix different types of batteries or new and old batteries. Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • Do not heat, take apart, or throw batteries into fire. • If you will not be using the remote control for a long time, remove the batteries. • Ensure that you have the batteries’ polarity (+/−) aligned correctly. • Do not use new and old batteries together, or use different types of batteries together. • Dispose of used batteries according to your local regulations.

  • Page 18: Installation And Connections

    2. Installation and Connections This section describes how to set up your projector and how to connect video and audio sources. Your projector is simple to set up and use. But before you get started, you must first: 1 Set up a screen and the projector. 2 Connect your computer or video equipment to the projector. See pages 12, 13, 14, 15, 16. 3 Connect the supplied power cord. See page 16. NOTE: Ensure that the power cord and any other cables are disconnected before moving the projector. To the wall outlet. Setting Up the Screen and the Projector Selecting a Location The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is 30"...

  • Page 19: Throw Distance And Screen Size

    2. Installation and Connections Throw Distance and Screen Size The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distance Chart Screen center Screen bottom 2.9"/73 mm Lens center Installation surface Screen Size D(WIDE) Diagonal Width Height Wide Tele Wide Tele inch inch inch inch inch inch inch degree degree 1180 -...

  • Page 20: Reflecting The Image

    2. Installation and Connections Reflecting the Image WARNING Using a mirror to reflect your projector's image enables * Installing your projector on the ceiling must be done you to enjoy a much larger image when a smaller space by a qualified technician. Contact your NEC dealer is required. Contact your NEC dealer if you need a mirror for more information. system. If you're using a mirror system and your image is inverted, use the MENU and buttons on your * Do not attempt to install the projector yourself. remote control to correct the orientation. (→ page 56) • Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely damaged. • Do not use the projector where temperatures vary greatly. The projector must be used at temperatures between 41˚F (5˚C) and 104˚F (40˚C). ([ECO MODE] is set automatically to [ON] at 95°F to 104°F/35°C to 40°C.) • Do not expose the projector to moisture, dust, or smoke. This will harm the screen image.

  • Page 21: Making Connections

    * If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software. Enabling the computer’s external display Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the ‘Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections. VE280X/VE280 VE281X/VE281/VE282X/VE282 HDMI IN COMPUTER IN...

  • Page 22: Connecting Your Dvd Player With Component Output

    2. Installation and Connections Connecting Your DVD Player with Component Output Use audio equipment for stereo sound. The projector's built-in speaker is monaural. AUDIO IN COMPUTER IN Optional 15-pin - to - RCA (female) ×3 cable (ADP-CV1E) Stereo mini plug - to - RCA audio cable (not supplied) Audio Equipment Component video RCA×3 cable (not supplied) DVD player...

  • Page 23: Connecting Your Vcr

    2. Installation and Connections Connecting Your VCR Use audio equipment for stereo sound. The projector's built-in speaker is monaural. AUDIO IN VIDEO IN Video cable (not supplied) Stereo mini plug - to - RCA audio cable (not supplied) Audio equipment Audio cable (not supplied) NOTE: Refer to your VCR owner's manual for more information about your equipment's video output requirements. NOTE: An image may not be displayed correctly when a Video source is played back in fast-forward or fast-rewind via a scan converter. TIP: The AUDIO IN Mini Jack (Stereo Mini) is shared between COMPUTER and VIDEO inputs.

  • Page 24: Connecting Hdmi Input (Ve281X/Ve281/Ve282X/Ve282 Only)

    2. Installation and Connections Connecting HDMI Input (VE281X/VE281/VE282X/VE282 only) You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the HDMI IN connector of your projector. NOTE: The HDMI IN connector supports Plug & Play (DDC2B). HDMI IN HDMI cable (not supplied) Use High Speed HDMI ® Cable. Audio cable (not supplied) TIP: For users of audio video equipment with an HDMI connector: Select “Enhanced” rather than “Normal” if HDMI output is switchable between “Enhanced” and “Normal”. This will provide improved image contrast and more detailed dark areas. For more information on settings, refer to the instruction manual of the audio video equipment to be connected.

  • Page 25: Connecting The Supplied Power Cord

    2. Installation and Connections Connecting the Supplied Power Cord Connect the supplied power cord to the projector. First connect the supplied power cord's three-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cord in the wall outlet. The projector will go into standby mode. When in standby mode, the POWER indicator will light orange and the STATUS indicator will light green when [NORMAL] is selected for [STANDBY MODE]. To wall outlet Make sure that the prongs are fully inserted into both the power plug and the wall outlet.

  • Page 26: Projecting An Image (Basic Operation)

    TIP: • When the STATUS indicator lights orange, it means that the [CONTROL PANEL LOCK] is turned on. (→ page 56) Preparing to power on After you turn on your projector, ensure that the computer Standby Power On or video source is turned on. NOTE: When no signal is available, the NEC logo (default), blue, or black screen will be displayed. After a lapse of 45 seconds from when the projector displays a blue, black or logo screen, [ECO MODE] will Steady orange light Blinking green light Steady green light always switch to [ON]. This is done only when [ECO MODE] is set to [OFF]. (→ page 67)

  • Page 27: Note On Startup Screen (Menu Language Select Screen)

    3. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 27 menu languages. To select a menu language, follow these steps: 1. Use the button to select one of the 27 languages from the menu. 2. Press the ENTER button to execute the selection. After this has been done, you can proceed to the menu operation.

  • Page 28: Selecting A Source

    3. Projecting an Image (Basic Operation) Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Selecting from Source List Press and quickly release the SOURCE button on the projector cabinet to display the Source list. Each time the SOURCE button is pressed, the input source will change as follows: “COMPUTER”, “VIDEO”, “HDMI”. To display the selected VE280X/VE280 source, press the ENTER button or allow 2 seconds to elapse. Detecting the Signal Automatically Press the SOURCE button once. The projector will search for the available input source and display it. The input source will change as follows: VE281X/VE281/VE282X/VE282 VE280X/VE280: COMPUTER → VIDEO → COMPUTER →...

  • Page 29: Adjusting The Picture Size And Position

    3. Projecting an Image (Basic Operation) Adjusting the Picture Size and Position Use the adjustable tilt foot, the zoom lever or the focus ring to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity. Adjusting the throw angle (the height of an image) Adjusting the left and right tilt of an image [Tilt foot] (→ page 21) [Rear foot] (→ page 21) Finely adjusting the size of an image Adjusting the focus [Zoom lever] (→ page 22) [Focus ring] (→ page 22) Adjusting the keystone correction [KEYSTONE] (→ page 23)

  • Page 30: Adjust The Tilt Foot

    3. Projecting an Image (Basic Operation) Adjust the Tilt Foot 1. Lift the front edge of the projector. CAUTION: Do not try to touch the Exhaust Vent during Tilt Foot adjustment as it can become heated while the projector is turned on and after it is turned off. Exhaust Vent 2. Rotate the Adjustable Tilt Foot on the front of the projector to Adjustable Tilt Foot extend the adjustable tilt foot.

  • Page 31: Zoom

    3. Projecting an Image (Basic Operation) Zoom Use the ZOOM lever to adjust the image size on the screen. Zoom Lever Focus Use the FOCUS ring to obtain the best focus. Focus Ring...

  • Page 32: Correcting Keystone Distortion

    3. Projecting an Image (Basic Operation) Correcting Keystone Distortion Correcting Keystone Distortion If the screen is tilted vertically, keystone distortion becomes large. Proceed with the following steps to correct keystone distortion NOTE: • The Keystone correction can cause an image to be slightly blurred because the correction is made electronically. • The Keystone correction range can be made narrower, depending on a signal or its aspect ratio selection. • When conducting extreme offset with Keystone correction, sometimes, based on its combination with aspect ratio, it occurs that the on screen menu would extend beyond the screen. When this happens, please adjust it back into the screen.

  • Page 33: Adjusting With The Remote Control

    3. Projecting an Image (Basic Operation) Adjusting with the remote control 1. Press the KEYSTONE button. The Keystone bar will be displayed. 2. Use the button to correct the keystone distortion. Adjust so that the right and left sides are parallel. 3.

  • Page 34: Optimizing Computer Signal Automatically

    3. Projecting an Image (Basic Operation) Optimizing Computer Signal Automatically Adjusting the Image Using Auto Adjust Optimizing a computer image automatically. Press the AUTO ADJ. button to optimize a computer image automatically. This adjustment may be necessary when you connect your computer for the first time. [Poor picture] [Normal picture] NOTE: Some signals may take time to display or may not be displayed correctly. • The Auto Adjust function will work for computer (RGB) signal only. • If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE] manually. (→ page 49, 50) Turning Up or Down Volume Sound level from the speaker can be adjusted. Increase volume Decrease volume NOTE: The [BEEP] sound volume cannot be adjusted. To turn off the [BEEP] sound, from the menu, select [SETUP] → [OPTIONS (1)] → [BEEP] → [OFF]. (→...

  • Page 35: Turning Off The Projector

    3. Projecting an Image (Basic Operation) Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the POWER OFF button on the remote control. The [POWER OFF / ARE YOU SURE? /CARBON SAVINGS- SESSION X.XXX[g-CO2]] message will appear.

  • Page 36: After Use

    3. Projecting an Image (Basic Operation) After Use Preparation: Make sure that the projector is turned off. 1. Disconnect any other cables. 2. Retract adjustable tilt foot if extended.

  • Page 37: Convenient Features

    4. Convenient Features Turning off the Image and Sound Press the AV-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. NOTE: Even though the image is turned off, the menu still remains on the screen. Freezing a Picture Press the FREEZE button to freeze a picture. Press again to resume motion.

  • Page 38: Changing Eco Mode

    4. Convenient Features Changing Eco Mode This feature enables you to select two brightness modes of the lamp: OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE]. [ECO MODE] Description Status of LAMP indicator [OFF] This is the default setting (100% Brightness). LAMP STATUS [ON] Select this mode to increase the lamp life (approx. Steady Green light LAMP 80% Brightness.) STATUS To turn on the [ECO MODE], do the following: 1. Press the ECO button on the remote control to display [ECO MODE] screen. 2. Use the button to select [ON]. 3.

  • Page 39: Checking Energy-Saving Effect [Carbon Meter]

    4. Convenient Features Checking Energy-Saving Effect [CARBON METER] This feature will show energy-saving effect in terms of CO emission reduction (kg) when the projector’s [ECO MODE] is set to [ON]. This feature is called [CARBON METER]. There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBON SAVINGS] message shows the total amount of CO emission reduction from the time of shipment up to now. You can check the information on [USAGE TIME] from [INFO.] of the menu. (→ page 62) The [CARBON SAVINGS-SESSION] message shows the amount of CO emission reduction between the time of changing to ECO MODE immediately after the time of power-on and the time of power-off. The [CARBON SAVINGS- SESSION] message will be displayed in the [POWER OFF/ ARE YOU SURE?] message at the time of power-off. TIP: • The formula as shown below is used to calculate the amount of CO emission reduction. Amount of CO emission reduction = Power consumption in OFF for ECO MODE – Power consumption in ON for ECO MODE x conversion factor.* * Calculation for amount of CO emission reduction is based on an OECD publication “CO Emissions from Fuel Combustion, 2008 Edition”. • This formula will not apply to the power consumption which is not affected by whether [ECO MODE] is turned on or off.

  • Page 40: Using The Optional Remote Mouse Receiver (Np01Mr)

    4. Convenient Features Using the Optional Remote Mouse Receiver (NP01MR) The optional remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations. Connecting the remote mouse receiver to your computer If you wish to use the remote mouse function, connect the mouse receiver and computer. The mouse receiver can be connected directly to the computer’s USB port (type A). NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change your computer settings. Computer Remote mouse receiver To USB port of PC or Macintosh When operating a computer via the remote mouse receiver 7m/22 feet 30˚...

  • Page 41: About Drag Mode

    4. Convenient Features Operating your computer’s mouse from the remote control You can operate your computer’s mouse from the remote control. PAGE Button: scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer. Buttons: moves the mouse cursor on your computer. MOUSE L-CLICK Button: works as the mouse left button. MOUSE R-CLICK Button: works as the mouse right button. NOTE: • When you operate the computer using the button with the menu displayed, both the menu and the mouse pointer will be affected. Close the menu and perform the mouse operation. • The PAGE buttons do not work with PowerPoint for Macintosh.

  • Page 42: Using The Computer Cable (Vga) To Operate The Projector (Virtual Remote Tool)

    4. Convenient Features Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool) Using the utility software “Virtual Remote Tool” included on the companion NEC Projector CD-ROM, Virtual Remote screen (or toolbar) can be displayed on your computer screen. This will help you perform operations such as projector’s power on or off and signal selection via the computer cable (VGA), serial cable, or USB connection. Virtual Remote screen Toolbar This section provides an outline of preparation for use of Virtual Remote Tool. For information on how to use Virtual Remote Tool, see Help of Virtual Remote Tool. (→ page 38) Step 1: Install Virtual Remote Tool on the computer. (→ page 34) Step 2: Connect the projector to the computer. (→ page 36) Step 3: Start Virtual Remote Tool. (→ page 37) NOTE: • When [COMPUTER ] is selected from your source selection, the Virtual Remote screen or the toolbar will be displayed as well as your computer screen. • Use the supplied computer cable (VGA) to connect the COMPUTER IN connector directly with the monitor output connector of the computer to use Virtual Remote Tool. Using a switcher or other cables than the supplied computer cable (VGA) may cause failure in signal communication. VGA cable connector: Pin Nos. 12 and 15 are required for DDC/CI. • Virtual Remote Tool may not work depending on your computer’s specifications and version of graphic adapters or drivers.
  • Page 43 1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive. The folders in NEC Projector CD-ROM will be displayed. If the folders are not displayed, right-click the CD/DVD drive icon in Windows’ “Computer” (or “My Computer”) and select “Open”.
  • Page 44 4. Convenient Features 4 Click “Next”. “END USER LICENSE AGREEMENT” screen will be displayed. Read “END USER LICENSE AGREEMENT” carefully. 5 If you agree, click “I accept the terms in the license agreement” and then click “Next”. • Follow the instructions on the installer screens to complete the installation.
  • Page 45 4. Convenient Features TIP: Uninstalling Virtual Remote Tool Preparation: Exit Virtual Remote Tool before uninstalling. To uninstall Virtual Remote Tool, the Windows user account must have “Administrator” privilege (Windows 7 and Windows Vista) or “Computer Administrator” privilege (Windows XP). • For Windows 7/Windows Vista 1 Click “Start” and then “Control Panel”. The Control Panel window will be displayed. 2 Click “Uninstall a program” under “Programs” The “Programs and Features” window will be displayed. 3 Select Virtual Remote Tool and click it.
  • Page 46 Windows Desktop. Start from the Start menu • Click [Start] → [All Programs] or [Programs] → [NEC Projector User Supportware] → [Virtual Remote Tool] → [Virtual Remote Tool]. When Virtual Remote Tool starts for the first time, “Easy Setup” window will be displayed.
  • Page 47 The Help screen will be displayed. • Displaying the help file using the Start Menu. 1. Click “Start”. “All programs” or “Programs”. “NEC Projector User Supportware”. “Virtual Remote Tool”. and then “Virtual Remote Tool Help” in this order. The Help screen will be displayed.

  • Page 48: Viewing 3D Images

    4. Convenient Features Viewing 3D Images The projector provides 3D images to a user wearing optional LCD shutter eyeglasses (NP02GL) CAUTION Health precautions Before viewing, be sure to read health care precautions that may be found in the user’s manual included with your LCD shutter eyeglasses or your 3D compatible content such as DVDs, video games, computer's video files and the like. To avoid any adverse symptoms, heed the following: - Do not use LCD shutter eyeglasses for viewing any material other than 3D images. - Allow a distance of 2 m/7 feet or greater between the screen and a user. Viewing 3D images from too close a distance can strain your eyes. - Avoid viewing 3D images for a prolonged period of time. Take a break of 15 minutes or longer after every hour of viewing. - If you or any member of your family has a history of light-sensitive seizures, consult a doctor before viewing 3D images. - While viewing 3D images, if you get sick such as nausea, dizziness, queasiness, headache, eyestrain, blurry vision, convulsions, and numbness, stop viewing them. If symptoms still persist, consult a doctor. - View 3D images from the front of the screen. Viewing from an angle may cause fatigue or eyestrain. LCD shutter eyeglasses (recommended) • Optional eyeglasses (NP02GL) You can also use commercially available DLP Link compatible LCD shutter eyeglasses. ® Steps for viewing 3D images on the projector 1.
  • Page 49 4. Convenient Features On-screen menu for 3D images Follow the steps to display the 3D menu. 1. Press the MENU button. The On-screen menu will be displayed. 2. Press the button twice, and then press the button. The [SETUP] menu will be displayed. 3. Press the button five times. The [3D] menu will be displayed [VE280X/VE280] [VE281X/VE281/VE282X/VE282]...
  • Page 50 4. Convenient Features Selecting input connected to a source of 3D images [COMPUTER] (VE280X/VE280)/[COMPUTER/HDMI] (VE281X/VE281/VE282X/VE282) This function switches the 3D mode between ON and OFF for each input. NOTE: To confirm that the supported 3D signal is accepted, use either way of the following: - Make sure that [3D] is displayed in the top right of the screen after the source is selected. - Display [INFO.] → [SOURCE (2)] → [3D SIGNAL] and make sure that "SUPPORTED" is displayed. NOTE: • The maximum distance for viewing 3D images is 15 m/590 inches from the lens surface under the following restrictions: - Brightness on the projector: 2000 lumens or greater - Screen gain: 1 - Viewing position: Facing straight towards the screen center - Outside light: None - LCD shutter eyeglasses: Using the optional 3D Goggles (NP02GL) • If 3D content is played back on your computer and the performance is poor it may be caused by the CPU or graphics chip. In this case you may have difficulty seeing the 3D images as they were intended. Check to see if your computer meets the requirements provided in your user's manual included with your 3D content. • The DLP Link compatible LCD shutter eyeglasses allow you to view 3D images by receiving synch signals, which are included in ®...
  • Page 51 4. Convenient Features Troubleshooting on viewing 3D images If images will not be displayed in 3D or 3D images appear as 2D, check the following table. Also refer to the user's manual accompanied with your 3D content or LCD shutter eyeglasses. Possible causes Solutions • The content you are playing back is not compatible with 3D. • Play back a content compatible with 3D. • Use the projector's menu to turn on 3D mode for the selected • The 3D mode was turned off for the selected source. source. (→ page 61) • You are not using our recommended LCD shutter eyeglasses. • Use our recommended LCD shutter eyeglasses. (→ page 39) • If the shutter of your LCD shutter eyeglasses cannot synchronize with the currently projected source, the following are possible causes: - Your LCD shutter eyeglasses are not switched on. • Switch on your LCD shutter eyeglasses. - The battery in the LCD shutter eyeglasses ran down. • Recharge the battery or replace it. • Change the eyeglass method for 3D by using the menu.. (→ - The correct eyeglass method is not selected.

  • Page 52: Using On-Screen Menu

    5. Using On-Screen Menu Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control to display the menu. 2. Press the buttons on the remote control to display the submenu. 3.

  • Page 53: Menu Elements

    5. Using On-Screen Menu Menu Elements Main menu Main menu + Sub menu Highlight ENTER button Slide bar Solid triangle button EXIT button ENTER icon Menu windows or dialog boxes typically have the following elements: Highlight �����������������������������Indicates the selected menu or item� Solid triangle ����������������������Indicates further choices are available�...

  • Page 54: List Of Menu Items

    5. Using On-Screen Menu List of Menu Items Some menu items are not available depending on the input source. Menu Item Default Options COMPUTER SOURCE VIDEO HDMI (VE281X/VE281/VE282X/VE282) PRESET HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB CONTRAST BRIGHTNESS SHARPNESS PICTURE COLOR GAMMA CORRECTION DYNAMIC, NATURAL, BLACK DETAIL DYNAMIC CONTRAST OFF, ON ADJUST CLOCK PHASE HORIZONTAL VERTICAL IMAGE OPTIONS OVERSCAN AUTO AUTO, OFF, ON ASPECT RATIO AUTO, 4:3, 16:9, 15:9, 16:10, WIDE ZOOM, NATIVE POSITION -16 to +16 NOISE REDUCTION OFF, LOW, MEDIUM, HIGH KEYSTONE...

  • Page 55: Menu Descriptions & Functions [Source]

    5. Using On-Screen Menu Menu Descriptions & Functions [SOURCE] [VE280X/VE280] [VE281X/VE281/VE282X/VE282] COMPUTER Selects the computer connected to your COMPUTER IN input connector. NOTE: • When the component input signal is connected to the COMPUTER IN connector, select [COMPUTER]. • The projector will determine if the input signal is RGB or component signal. HDMI ( VE281X/VE281/VE282X/VE282 Selects the HDMI compatible equipment connected to your HDMI IN connector. VIDEO Selects what is connected to your VIDEO input-VCR, DVD player or document camera. NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video source.

  • Page 56: Menu Descriptions & Functions [Adjust]

    5. Using On-Screen Menu Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. There are six factory presets optimized for various types of images. HIGH-BRIGHT �������� Recommended for use in a brightly lit room� PRESENTATION ����� Recommended for making a presentation using a PowerPoint file. VIDEO �������������������� Recommended for typical TV program viewing� MOVIE �������������������...

  • Page 57: Gamma Correction

    5. Using On-Screen Menu [GAMMA CORRECTION] Each mode is recommended for: DYNAMIC �������������� Creates a high-contrast picture� NATURAL �������������� Natural reproduction of the picture� BLACK DETAIL ������� Emphasizes detail in dark areas of the picture� [DYNAMIC CONTRAST] Turning on [DYNAMIC CONTRAST] allows the contrast ratio to be adjusted to the proper level. NOTE: • When the following states occur, the [DYNAMIC CONTRAST] cannot be chosen. • When [PRESET] is not [HIGH-BRIGHT]. • When [ECO MODE] is [ON]. • When [FAN MODE] is not [AUTO]. • When [WALL COLOR] is not [OFF].

  • Page 58: Image Options

    5. Using On-Screen Menu [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK ������������������� Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal banding in the image� This adjustment may be necessary when you connect your computer for the first time.
  • Page 59 5. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not a malfunction. - Your manual adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called up and applied. To delete adjustments stored in memory, from the menu, you select [RESET] → [ALL DATA] and reset the adjustments. NOTE: • The [RESET] → [ALL DATA] clear not only [IMAGE OPTION].(→page 64) Selecting Overscan Percentage [OVERSCAN] This allows you to set the appropriate overscan for an incoming signal. AUTO ��������������������� Display an appropriately overscanned image ( factory setting)� OFF ������������������������...
  • Page 60 5. Using On-Screen Menu Options Function AUTO The projector will automatically determine the incoming signal and display it in its aspect ratio. The projector may erroneously determine the aspect ratio depending on its signal. If this occurs, select the appropriate aspect ratio from the following. The image is displayed in 4:3 aspect ratio. 16:9 The image is displayed in 16:9 aspect ratio. 15:9 The image is displayed in 15:9 aspect ratio. 16:10 The image is displayed in 16:10 aspect ratio. WIDE ZOOM The image is stretched left and right. Parts of the displayed image are cropped at the left and right edges and therefore not visible. NATIVE The projector displays the current image in its true resolution when the incoming computer signal has a lower resolution than the projector’s native resolution. [Example 1] When the incoming signal with the resolution of 800 x 600 is displayed on the VE280/VE281/ VE282: [Example 2] When the incoming signal with the resolution of 800 x 600 is displayed on the VE280X/VE281X/ VE282X:...
  • Page 61 5. Using On-Screen Menu Adjusting the Vertical Position of Image [POSITION] (only when [16:9], [15:9], or [16:10] is selected for [ASPECT RATIO]) When [16:9], [15:9], or [16:10] is selected in [ASPECT RATIO], the image is displayed with black borders on the top and bottom. You can adjust the vertical position from the top to the bottom of the black area. Turning on Noise Reduction [NOISE REDUCTION] This function allows you to select the level of noise reduction. The projector is set to the optimized level for each signal at the factory. Select your preference item for your signal when video noise is noticeable. The options are [OFF], [LOW], [MEDIUM], and [HIGH]. NOTE: This feature is not available for the RGB signal. Noise reduction set to off gives best image quality by way of higher bandwidth. Noise reduction set to on softens the image.

  • Page 62: Menu Descriptions & Functions [Setup]

    5. Using On-Screen Menu Menu Descriptions & Functions [SETUP] [GENERAL] Correcting Vertical Keystone Distortion Manually [KEYSTONE] You can correct vertical distortion manually. (→ page 23) Using the Wall Color Correction [WALL COLOR] This function allows for quick adaptive color correction in applications where the screen material is not white. NOTE: • Selecting color options other than [OFF] will reduce brightness. • When the 3D mode is enabled, the [WALL COLOR] item is not available.
  • Page 63 5. Using On-Screen Menu Setting Eco Mode [ECO MODE] This feature turns on or off the ECO mode. The lamp life can be extended by selecting [ON]. Selecting [ON] also decreases fan noise when compared to [OFF] mode. ECO MODE Description Status of LAMP indicator This is the Default setting (100% Brightness). Select this mode to increase the lamp life Steady Green light (approx. 80% Brightness.) NOTE: • The [LAMP HOURS USED] can be checked in [USAGE TIME]. Select [INFO.] → [USAGE TIME]. (→ page 62) • The projector will always enter into the [ECO MODE] [ON] condition for 90 seconds immediately after the projector is turned on. The lamp condition will not be affected even when [ECO MODE] is changed within this time period. • After a lapse of 45 seconds from when the projector displays a blue, black or logo screen, [ECO MODE] will automatically switch to [ON]. The projector will return to the [OFF] mode once a signal is accepted. • If the projector becomes overheated in [OFF] mode because of use in a high-temperature room, there may be a case where the [ECO MODE] automatically changes to [ON] mode to protect the projector. This mode is called “forced ECO mode”. When the projector is in [ON] mode, the picture brightness decreases. The LAMP indicator’s steady light indicates the projector is in [ON] mode. When the projector comes back to normal temperature, the [ECO MODE] returns to [OFF] mode. Setting Closed Caption [CLOSED CAPTION] This option sets several closed caption modes that allow text to be superimposed on the projected image of Video.
  • Page 64 When [ON] is selected for [ECO MODE] To close the message, press the ENTER or the EXIT button. The message will disappear if no button operation is done for 30 seconds. When [OFF] is selected for [ECO MODE] Pressing the ENTER button will display the [ECO MODE] screen. (→ page 54) To close the message, press the EXIT button. Selecting a Color or Logo for Background [BACKGROUND] Use this feature to display a blue/black screen or logo when no signal is available. The default background is [LOGO]. TIP: The logo can be changed. For more information about how to change the logo, please consult your NEC or NEC-designated service station. If you cannot find one in your area, ask your dealer. NOTE: Your setting will not be affected even when [RESET] is done from the menu.
  • Page 65 5. Using On-Screen Menu [INSTALLATION] [VE280X/VE280/VE281X/VE281] [VE282X/VE282] Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONT CEILING REAR DESKTOP REAR CEILING FRONT Disabling the Cabinet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function. NOTE: • This CONTROL PANEL LOCK does not affect the remote control functions. • When the control panel is locked, pressing and holding the SOURCE button on the projector cabinet for about 10 seconds will change the setting to [OFF]. Selecting Communication Speed [COMMUNICATION SPEED] (VE280X/VE280/VE281X/VE281) This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate may be recommended for long cable runs). NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.
  • Page 66 5. Using On-Screen Menu [OPTIONS(1)] [VE280X/VE280] [VE281X/VE281/VE282X/VE282] Selecting Fan Mode [FAN MODE] This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode. AUTO ��������������������� The built-in fans automatically run at a variable speed according to the internal temperature� HIGH ���������������������� The built-in fans run at high speed� HIGH ALTITUDE ����� The built-in fans run at a high speed� Select this option when using the projector at altitudes approximately 1200 meters/ 4000 feet or higher�...
  • Page 67 5. Using On-Screen Menu Enabling or Disabling WXGA Mode [WXGA MODE] Selecting [ON] will give priority to a WXGA (1280 x 768) signal in recognizing an input signal. When [WXGA MODE] is set to [ON], an XGA (1024 x 768) signal may not be recognized. In this case, select [OFF]. Enabling Key Sound and Error Sound [BEEP] This feature turns on or off the button sound or alarm when the following operations are performed. - Displaying the main menu - Switching sources - Pressing POWER ON or POWER OFF button Setting HDMI [HDMI SETTINGS] (VE281X/VE281/VE282X/VE282) Make the settings for video level and audio level when connecting HDMI equipment such as a DVD player. VIDEO LEVEL ��������� Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NORMAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image contrast and increase detail in the dark areas�...
  • Page 68 5. Using On-Screen Menu [OPTIONS(2)] Selecting Power-saving in [STANDBY MODE] The projector has two standby modes: [NORMAL] and [POWER-SAVING]. The POWER-SAVING mode is the mode that allows you to put the projector in the power-saving condition which consumes less power than the NORMAL mode. The projector is preset for NORMAL mode at the factory. NORMAL ���������������� Power indicator: Orange light/STATUS indicator: Green light POWER-SAVING ���� Power indicator: Red light/STATUS indicator: Off The following connectors, buttons or functions will not work during this mode� - USB port - Virtual Remote Tool via the computer cable (VGA) connection - Buttons other than POWER button on the cabinet...
  • Page 69 5. Using On-Screen Menu Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP.)] When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER IN input will power on the projector and simultaneously project the computer’s image. This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet to power on the projector. NOTE: • Disconnecting a computer signal from the computer will not power off the projector. We recommend using this function in combination of the AUTO POWER OFF function.
  • Page 70 5. Using On-Screen Menu [3D] [VE280X/VE280] [VE281X/VE281/VE282X/VE282] Selecting input connected to a source of 3D images [COMPUTER] (VE280X/VE280)/[COMPUTER/HDMI] (VE281X/VE281/VE282X/VE282) [3D] This function switches the 3D mode between ON and OFF for each input. ON ������������������������� Turns on the 3D mode for the selected input� NOTE: To confirm that the supported 3D signal is accepted, use either way of the following: - Make sure that [3D] is displayed in the top right of the screen after the source is selected. - Display [INFO.] → [SOURCE] → [3D SIGNAL] and make sure that "SUPPORTED" is displayed. OFF ������������������������ Turns off the 3D mode for the selected input� [L/R INVERT] Change the setting if you have difficulty seeing 3D images.

  • Page 71: Menu Descriptions & Functions [Info.]

    5. Using On-Screen Menu Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has five pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LAMP HOURS USED] (H) [TOTAL CARBON SAVINGS] (kg-CO2) • The message to the effect that the lamp should be replaced will be displayed for one minute when the projector is turned on and when the POWER button on the projector or the remote control is pressed. To dismiss this message, press any button on the projector or the remote control. Lamp life(H) ECO MODE 4000 6000 • [TOTAL CARBON SAVINGS] This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving calculation is based on the OECD (2008 Edition).
  • Page 72 5. Using On-Screen Menu [SOURCE (1)] [SOURCE (2)] [SIGNAL TYPE] [RESOLUTION] [VIDEO TYPE] [HORIZONTAL FREQUENCY] [BIT DEPTH] (VE281X/VE281/VE282X/VE282) [VERTICAL FREQUENCY] [VIDEO LEVEL] (VE281X/VE281/VE282X/VE282) [SYNC TYPE] [3D SIGNAL] [SYNC POLARITY] [SCAN TYPE] [OTHERS] [VERSION] [FIRMWARE] Version [MODEL NO.] [DATA] Version [SERIAL NUMBER]...

  • Page 73: Menu Descriptions & Functions [Reset]

    5. Using On-Screen Menu Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [ALL DATA] Reset all the adjustments and settings for all the signals to the factory preset. All items can be reset EXCEPT [LANGUAGE], [BACKGROUND], [COMMUNICATION SPEED], [STANDBY MODE], [FAN MODE], [LAMP HOURS USED] and [TOTAL CARBON SAVINGS]. NOTE: Elapsed time of the lamp use will not be affected even when [RESET] is done from the menu.

  • Page 74: Maintenance

    6. Maintenance This section describes the simple maintenance procedures you should follow to clean the cabinet and the lens, and replace the lamp. Cleaning the Cabinet and the Lens 1. Turn off the projector before cleaning. 2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner. Vacuum the intake vent inlet of the cabinet.

  • Page 75: Replacing The Lamp

    6. Maintenance Replacing the Lamp When the lamp reaches the end of its life, the LAMP indicator in the cabinet will blink red and the message will be displayed. Even though the lamp may still be working, replace the lamp to maintain the optimal projector performance. To replace the lamp, contact your NEC dealer. The lamp is not user replaceable parts. CAUTION • If you continue to use the lamp after the lamp reaches the end of its life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your NEC dealer for lamp replacement. *NOTE: This message will be displayed under the following conditions: • for one minute after the projector has been powered on • when the (POWER) button on the projector cabinet or the POWER OFF button on the remote control is pressed To turn off the message, press any button on the projector cabinet or the remote control.

  • Page 76: Appendix

    7. Appendix Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Indicator Messages Power Indicator Indicator Condition Projector Condition Note The power cord is unplugged� – Blinking light Green 0�5 sec On, The projector is getting ready to turn on� Wait for a moment� 0�5 sec Off Steady light Green The projector is turned on�...
  • Page 77 7. Appendix Common Problems & Solutions (→ “Power/Status/Lamp Indicator” on page 67.) Problem Check These Items Does not turn on • Check that the power cord is plugged in and that the power button on the projector cabinet or the remote control or shut down is on. (→ pages 16 and 17) • Check to see if the projector has overheated. If there is insufficient ventilation around the projector or if the room where you are presenting is particularly warm, move the projector to a cooler location. • The lamp may fail to light. Wait a full minute and then turn on the power again. • Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 1200 meters/4000 feet or higher. Using the projector at altitudes approximately 1200 meters/4000 feet or higher without setting to [HIGH ALTITUDE] can cause the projector to overheat and the projector could shut down. If this happens, wait a couple minutes and turn on the projector. (→ page 57) If you turn on the projector immediately after the lamp is turned off, the fans run without displaying an image for some time and then the projector will display the image. Wait for a moment. Will turn off • Ensure that the [AUTO POWER OFF] is off. (→ page 54, 60) No picture • Use the COMPUTER or the VIDEO button on the remote control to select your source (Computer or Video). (→ page 19) If there is still no picture, press the button again. • Ensure your cables are connected properly.
  • Page 78 N OTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information. If it reads “---”, this means there is no signal being output from the computer. (→ page 63 or go to next step) • Enabling the computer’s external display. Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the “Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections. • Non-standard signal output from the computer If the output signal from a notebook PC is not an industry standard, the projected image may not be displayed correctly. Should this happen, deactivate the notebook PC’s LCD screen when the projector display is in use. Each notebook PC has a different way of deactivate/reactivate the local LCD screens as described in the previous step. Refer to your computer’s documentation for detailed information. • Image displayed is incorrect when using a Macintosh When using a Macintosh with the projector, set the DIPswitch of the Mac adapter (not supplied with the projector) according to your resolution. After setting, restart your Macintosh for the changes to take affect.

  • Page 79: Specifications

    7. Appendix Specifications This section provides technical information about the VE280X/VE281X/VE282X/VE280/VE281/VE282 projector's performance. Optical VE280X VE281X VE282X VE280 VE281 VE282 Projection System Single DLP chip (0.55”, aspect 4:3) ® Resolution* 1024 × 768 pixels (XGA) 800 × 600 pixels(SVGA) Manual zoom and focus Lens F=2.41-2.55, f=21.8-24.0mm 200W AC Lamp (160W in ECO ON) 2800 lumens Light Output * ECO ON: 80% Contrast Ratio* 3000:1 (full white: full black) Image Size (Diagonal) 30–300 inches/ 0.76 –7.6 m (4:3) 46” - 465” (wide) / 52” - 520” (tele)
  • Page 80 (HDCP) is a system for preventing illegal copying of video data sent over a High-Definition Multimedia Interface (HDMI). If you are unable to view material via the HDMI input, this does not necessarily mean the projector is not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC). An image with higher or lower resolution than the projector’s native resolution (VE280X/VE281X/VE282X: 1024 × 768 and VE280/VE281/VE282: 800 × 600) will be displayed with scaling technology. Mechanical VE280X VE281X VE282X VE280 VE281 VE282 Installation Orientation Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear 10.2”(W) x 3.5”(H) x 9.7”(D) Dimensions 260 mm (W) x 89.5 mm (H) x 247 mm (D) (not including protrusions) Weight 5.1 lbs / 2.3 kg Operational Temperatures : 41° to 104°F (5° to 40°C), (ECO mode selected automatically at 95°F to 104°F/35°C to 40°C) Environmental 20% to 80% humidity (non-condensing) Considerations Storage Temperatures : 14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing) UL/C-UL Approved (UL 60950-1, CSA 60950-1) Meets DOC Canada Class B requirements Meets FCC Class B requirements Regulations Meets AS/NZS CISPR.22 Class B Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3) For additional information visit: US : http://www.necdisplay.com/ Global : http://www.nec-display.com/global/index.html For information on our optional accessories, visit our website or see our brochure. The specifications are subject to change without notice.

  • Page 81: Cabinet Dimensions

    7. Appendix Cabinet Dimensions VE282X/VE282 VE281X/VE281 VE280X/VE280 260(10.2) Lens center 75(3.0) Lens center Unit: mm (inch)

  • Page 82: Pin Assignments Of D-Sub Computer Input Connector

    7. Appendix Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector Pin No. RGB Signal (Analog) YCbCr Signal 11 12 13 14 15 Red Green or Sync on Green Blue Ground Signal Level Ground Video signal : 0.7Vp-p (Analog) Red Ground Cr Ground Sync signal : TTL level Green Ground Y Ground Blue Ground Cb Ground No Connection Sync Signal Ground No Connection...

  • Page 83: Compatible Input Signal List

    7. Appendix Compatible Input Signal List Horizontal: 15KHz to 100KHz (RGB: 24KHz or over) Vertical: 50Hz to 85Hz Analog RGB Component Resolution Refresh Rate Refresh Rate Signal Aspect Ratio Signal Format Aspect Ratio ( dots ) ( Hz ) ( Hz ) 640 × 60/72/75/85/ HDTV (1080i) 1920 × 1080 16:9 50/60 iMac HDTV (720p) 1280 × 16:9 50/60 SVGA 800 ×...

  • Page 84: Pc Control Codes And Cable Connection

    7. Appendix PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON POWER OFF INPUT SELECT COMPUTER INPUT SELECT HDMI (VE281X/VE281/VE282X/VE282) INPUT SELECT VIDEO PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON SOUND MUTE OFF NOTE: Contact your local dealer for a full list of the PC Control Codes if needed.

  • Page 85: Troubleshooting Check List

    7. Appendix Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem more efficiently. * Print this page and the next page for your check. Frequency of occurrence always sometimes (How often?_____________________) other (__________________) Power No power (POWER indicator does not light green)� See also “Status Shut down during operation� Indicator (STATUS)”� Power cord’s plug is fully inserted into the wall outlet� Power cord’s plug is fully inserted into the wall outlet�...

  • Page 86: Installation Environment

    Native resolution: Refresh rate: Video adapter: Other: Projector DVD player Video equipment Signal cable VCR, DVD player, Video camera, Video game or other NEC standard or other manufacturer’s cable? Model number: Length: inch/m Manufacturer: Distribution amplifier Model number: Model number: Switcher...

  • Page 87: Register Your Projector! (For Residents In The United States, Canada, And Mexico)

    7. Appendix REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and Mexico) Please take time to register your new projector. This will activate your limited parts and labor warranty and InstaCare service program. Visit our web site at www.necdisplay.com, click on support center/register product and submit your completed form online. Upon receipt, we will send a confirmation letter with all the details you will need to take advantage of fast, reliable warranty and service programs from the industry leader, NEC Display Solutions of America, Inc.
  • Page 88 © NEC Display Solutions, Ltd. 2012 7N951841...

This manual is also suitable for:

Np-ve281xVe280xVe281xVe282xVe280Ve281 ... Show all

Table of Contents