Table of Contents
Advertisement
Available languages
Available languages
A WARNING
: Two or more people
may be need to install and move the appliance.
Install
or store
unit where
it wUl not be exposed
to temperatures
below
freezing
or
exposed
to outside
weather
conditions.
Properly
ground
washer
to conform
with all governing
codes
and ordinances.
To reduce
the risk of +electric
shock,
do not install
the washer
in humid
spaces.
The base opening
must
not be obstructed
by carpeting
when
the washing
machine
is installed
on a carpeted
floor.
in countries
where
there
are areas
which
may be subject
to infestation
by cockroaches
or other
vermin,
pay
particular
attention
to keeping
the appliance
and
its surroundings
in clean
condition
at all times.
Damage
caused
by cockroaches
or other
vermin
will not be covered
by the appliance
warranty.
,, Shipping
bolts
The appliance is fitted with shipping bolts to prevent
internal damage during transportation.
Packing and all shipping bolts must be removed
before using the washer.
_ When unpacking the base, be sure to remove the
additional packing support in the middle of the
base packing.
........
_,!_i_ ¸_¸¸_¸¸_
_
•
vvasner _i_
Base _'acKing
Packing
Support
,, Removing
shipping
bolts
d
1. To prevent internal damage during transport,
4 locking bolts are installed. Before operating
the washer, remove the bolts and braces.
• If they are not removed, it may cause severe
vibration, noise, and malfunction.
2. Unscrew the 4 bolts with the wrench supplied.
Do first lower side to remove easily. One of the
bolts retains the power cord of the washer to
prevent operating without removing bolts.
3. Take out the 4 bolts and braces by twisting
the braces slightly. Keep the 4 bolts, braces
and the wrench for future use.
• Whenever the appliance is transported, the
shipping bolts and braces must be replaced.
4. Close the holes with the caps supplied.
Hide quick links:
Advertisement
Table of Contents
