hit counter script
Download
Share
Print this page
HP Vectra VEC 7 Installation Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. PCI Card
  5. Vectra VEC 7
  6. Installation manual

HP Vectra VEC 7 Installation Manual

Pci network interface card (10bt)
Hide thumbs Also See for Vectra VEC 7:

Advertisement

Quick Links

Download this manual See also: Maintenance Manual, User Manual
Etherlink III PCI Network Interface
Card (10BT)
3C590-TPO
Installation Guide

Advertisement

loading

Related Manuals for HP Vectra VEC 7

Summary of Contents for HP Vectra VEC 7

  • Page 1 Etherlink III PCI Network Interface Card (10BT) 3C590-TPO Installation Guide...
  • Page 2 Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  • Page 3 10 (PCI) Level Procedure 1 With the HP Vectra turned off install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Power on the machine and allow it to boot to a DOS prompt. 3 Insert the 3COM drivers diskette (ver. 5.0 downloaded from 3COM’s website) and execute 3C59XCFG.EXE.
  • Page 4 Under the heading "Select the driver for your network board", insert the 3Com 3C590 drivers disk and set the path to "A:\NETWARE\ CLIENT." (If you have an HP preloaded HDD, set path to "C:\Masters\ LanDrv\3C590\NETWARE\CLIENT\) d Press "Enter" to continue the installation.
  • Page 5 1 Connecting to a Netware 3.12 Server Windows for Workgroups and hit enter. 11 Insert the 3COM Etherlink 3C590 Ethernet card and drivers disk, set the path to “A:\NETWARE\CLIENT\” and press enter. 12 Select “3Com Fast Etherlink / Etherlink III Bus Master Family” and press enter.
  • Page 6 1 Connecting to a Netware 3.12 Server Windows for Workgroups...
  • Page 7 • File Name: EL59X.VXD Size: 38KB Date: 1/27/97 Driver for Vectra VE7/VE8: Windows 95 Embedded • Windows 95 SR2 media (If you have an HP preloaded HDD, the media is located at C:\Masters\Win95\System\Cabs\) • Novell Netrware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
  • Page 8 1 Connecting to a Netware 3.12 Server Windows 95 SR2 ethernet card 8 When prompted, click on “OK” to continue. 9 Enter “Computer Name”, “Workgroup”, and “Computer Description” data and then open the “Configuration” folder. 10 In the “Configuration” folder, click on “Add”, then click on “Protocol” and click on “Add”...
  • Page 9 10 (PCI) Level Procedure 1 With the HP Vectra turned off install the 3COM Etherlink III 3C509-B adapter card into an ISA slot. 2 Power on the machine and allow it to boot to a DOS prompt. 3 Insert the 3COM drivers diskette (ver. 5.0 downloaded from 3COM’s...
  • Page 10 Under the heading "Select the driver for your network board", insert the 3Com 3C590 drivers disk and set the path to "A:\NETWARE\CLI- ENT." (If you have an HP preloaded HDD, set path to "C:\Masters\Lan- Drv\3C590\NETWARE\CLIENT\) d Press "Enter" to continue the installation.
  • Page 11 2 Connecting to a Netware 4.11 Server Windows for Workgroups 8 Accept the default products by pressing Enter, and then press “F10” to continue. 9 Select 16-bit LAN Drivers and hit the Enter key. 10 Page down the Board Drivers list to “USER SPECIFIED 16 BIT DRIVER” and hit enter.
  • Page 12 2 Connecting to a Netware 4.11 Server Windows for Workgroups...
  • Page 13 Vectra VL8 and VL7 Driver Name: EL59X.VXD Size: 38KB Date: 1/07/97 • Vectra VE7/VE8 Driver: Windows 95 Embedded • Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is located at C:\Masters\Win95\System\Cabs\) • Novell Netrware 4.11 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
  • Page 14 2 Connecting to a Netware 4.11 Server Windows 95 SR2 8 When prompted, click on “OK” to continue. 9 Enter “Computer Name”, “Workgroup”, and “Computer Description” data and then open the “Configuration” folder. 10 In the “Configuration” folder, click on “Add”, then click on “Protocol” and click on “Add”...
  • Page 15 9 (PCI) 10 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C590 adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C590 card. 3 Power on machine and allow to boot to MS-DOS.
  • Page 16 Adapter.” 13 Set the path to “A:\NDIS\WFW” in the “Install Driver” dialog box, and then insert the 3COM 3C590 drivers disk. (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C590\NDIS\WFW”) 14 Click “OK” on “Install Driver” dialog box.
  • Page 17 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11 22 To complete the installation, click on “Restart Computer” in the “Windows Setup” dialog box.
  • Page 18 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver. 3.11...
  • Page 19 10 (PCI) 11 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C590 PCI adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C590 PCI card. 3 Insert a DOS bootable diskette and power on the machine.
  • Page 20 3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 9 When prompted, click on “OK” to continue. 10 Enter “Computer Name”, “Workgroup”, and “Computer Description” data and then open the “Configuration” folder. 11 In the “Configuration” folder, click on “Add”, then click on “Protocol” and click on “Add”...
  • Page 21 9 (PCI) 10 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C590 PCI adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C590 card. 3 Insert a DOS bootable diskette and power on the machine.
  • Page 22 13 In the “Windows NT Setup” window, set the path to your NT files and click on the “Continue” button. (If you have an HP preloaded HDD, set path to “C:\I386”) 14 Click on the “Do Not Detect” button from the “Network Adapter Card Detection”...
  • Page 23 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 administrator) 25 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator) 26 To complete the installation, remove the floppy disk, and click on “Restart Computer”...
  • Page 24 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51...
  • Page 25 10 (PCI) 10 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C590 PCI adapter card into a PCI slot. 2 Connect network media to the 3COM 3C590 PCI card. 3 Insert a DOS bootable diskette and power on the machine.
  • Page 26 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required information, contact your network administrator.) 10 Click on “Start”...
  • Page 27 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 24 When “Windows NT is now ready to start the network…” click on “Next.” 25 Specify your Computer Name, Workgroup or Domain and click on “Next.” (If you do not have the required information, contact your network administrator.).
  • Page 28 3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0...
  • Page 29 9 (PCI) 10 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C590 adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C590 card. 3 Power on machine and allow to boot to MS-DOS.
  • Page 30 Adapter.” 13 Set the path to “A:\NDIS\WFW” in the “Install Driver” dialog box, and then insert the 3COM 3C590 drivers disk. (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C590\NDIS\WFW”) 14 Click “OK” on “Install Driver” dialog box.
  • Page 31 4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11 “Windows Setup” dialog box.
  • Page 32 4. Connecting to a Windows NT Server 4.0 Windows for Workgroups Ver. 3.11...
  • Page 33 10 (PCI) 11 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C590 PCI adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C590 PCI card. 3 Insert a DOS bootable diskette and power on the machine.
  • Page 34 4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 9 When prompted, click on “OK” to continue. 10 Enter “Computer Name”, “Workgroup”, and “Computer Description” data and then open the “Configuration” folder. 11 In the “Configuration” folder, click on “Add”, then click on “Protocol” and click on “Add”...
  • Page 35 9 (PCI) 10 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C590 PCI adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C590 card. 3 Insert a DOS bootable diskette and power on the machine.
  • Page 36 13 In the “Windows NT Setup” window, set the path to your NT files and click on the “Continue” button. (If you have an HP preloaded HDD, set path to “C:\I386”) 14 Click on the “Do Not Detect” button from the “Network Adapter Card Detection”...
  • Page 37 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 administrator) 25 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator) 26 To complete the installation, remove the floppy disk, and click on “Restart Computer”...
  • Page 38 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51...
  • Page 39 10 (PCI) 10 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C590 PCI adapter card into a PCI slot. 2 Connect network media to the 3COM 3C590 PCI card. 3 Insert a DOS bootable diskette and power on the machine.
  • Page 40 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 8 Power on the machine and allow it to boot to Windows NT Workstation 4.0. 9 Log onto the machine with administrator privileges. (If you do not have the required information, contact your network administrator.) 10 Click on “Start”...
  • Page 41 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 27 To complete the installation, select “Yes” to reboot your computer.
  • Page 42 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0...
  • Page 44 Version Number 3COM 590 PCI Rev.1...

This manual is also suitable for:

Vectra vl6 73c590-tpoEtherlink iii