To exchange files between the IC recorder
and your computer, connect the IC recorder
to your computer.
1
Connect the
IC recorder with the USB port of your
running computer with the supplied USB
connecting cable inserted into the
connectors securely until each plug stops
to the end.
2
Make sure the IC recorder has been
recognized properly.
On the Windows screen; open "我的电
脑" or "计算机," and make sure that "IC
RECORDER" or "MEMORY CARD"
has been recognized.
On the Macintosh screen; make sure that
an "IC RECORDER" or "MEMORY
CARD" drive is displayed on the
desktop.
The IC recorder is recognized by the
computer as soon as the connection is
made. While the IC recorder is connected to
the computer, "正在连接" is displayed in
the display window of the IC recorder.
86
GB
(USB) connector of the
P Notes
• If you connect more than two USB devices
to your computer, normal operation will not
be guaranteed.
• Use of this IC recorder with a USB hub or a
USB connecting cable other than the
supplied cable is not guaranteed.
• A malfunction may occur depending on the
USB devices connected at the same time.
• Before connecting the IC recorder to your
computer, check that the batteries are
inserted in the IC recorder.
• It is recommended that you disconnect the
IC recorder from the computer when you are
not using the IC recorder connected to the
computer.
Structure of folders and
files
The folders and files are displayed on the
computer screen as shown.
On a Windows screen using 资源管理器,
and on a Macintosh screen using Finder,
folders and files can be displayed by
opening "IC RECORDER" or "MEMORY
CARD."