hit counter script
Asus SP97-XV User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. SP97-XV
  6. User manual
Asus SP97-XV User Manual

Asus SP97-XV User Manual

Pentium atx motherboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

SP97-XV
R
Pentium
ATX Motherboard
®
USER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Asus SP97-XV

Summary of Contents for Asus SP97-XV

  • Page 1 SP97-XV Pentium ATX Motherboard ® USER’S MANUAL...
  • Page 2 Product warranty or service will not be extended if: (1) the motherboard is repaired, modi- fied or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Asus Contact Information

    Technical Support BBS: +1-408-474-0569 Email: tsd-usa@asus.com.tw WWW: www.asus.com ASUS COMPUTER GmbH Marketing Info Address: Harkort Str. 25, 40880 Ratingen, BRD, Germany Telephone: 49-2102-445011 Fax: 49-2102-442066 Email: info-ger@asus.com.tw Technical Support BBS: 49-2102-448690 Email: tsd-ger@asus.com.tw Hotline: 49-2102-499712 ASUS SP97-XV User’s Manual...

  • Page 4: Table Of Contents

    How this manual is organized ............7 Item Checklist .................. 7 II. FEATURES ..................8 Features of the ASUS SP97-XV Motherboard ........ 8 Parts of the ASUS SP97-XV Motherboard ........ 9 III. INSTALLATION ................ 10 ASUS SP97-XV Motherboard Layout .......... 10 Installation Steps ................
  • Page 5 ASUS PCI-SC200 & PCI-SC860 SCSI Cards ......55 Setting Up the ASUS PCI-SC200 & PCI-SC860 ..... 56 Setting the INT Assignment for the ASUS PCI-SC200 ... 56 Terminator Requirements for SCSI Devices ......56 Terminator Settings for the ASUS PCI-SC860 ......57 Terminator Settings for the ASUS PCI-SC200 ......

  • Page 6: Federal Communications Commission Statement

    Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Cana- dian Department of Communications. ASUS SP97-XV User’s Manual...

  • Page 7: Introduction

    Instructions on setting up the BIOS software Support Software: Information on the included support software VI. ASUS SCSI Cards: Installation of ASUS SCSI cards (optional) Item Checklist Please check that your package is complete. If you discover damaged or missing items, please contact your retailer.

  • Page 8: Features

    II. FEATURES Features of the ASUS SP97-XV Motherboard The ASUS SP97-XV motherboard is carefully designed for the demanding PC user who wants many features in a small package, namely: • SiS Chipset: Features either SiS5582 or SiS5598 chipsets. The SiS5598 chipset has a built-in video controller and supports video shared memory from 1-4MB.

  • Page 9: Parts Of The Asus Sp97-Xv Motherboard

    II. FEATURES Parts of the ASUS SP97-XV Motherboard 2 DIMM CPU ZIF Sockets Socket 7 T: PS/2 Mouse B: PS/2 Keyboard T: USB Port 1 B: USB Port 2 COM 1 T: Parallel Conn. B: Serial Conn. COM 2 512KB Pipelined...

  • Page 10: Installation

    III. INSTALLATION ASUS SP97-XV Motherboard Layout PWR_FAN Board Power Input PS/2 for ATX Power Supply VGA_SEL MOUSE (TOP PORT) KEYBOARD (BOTTOM) CPU Voltage VID0 VID1 VID2 USB 1(TOP PORT) USB 2 (BOTTOM) COM 1 CPU_FAN BUS Freq. 512KB Pipelined Burst L2 Cache...
  • Page 11 17) KEYLOCK (PANEL) p. 29 Keyboard Lock Switch Lead (2 pins) 18) SPEAKER (PANEL) p. 29 Speaker Output Connector (4 pins) 19) VGACON (optional) p. 30 Onboard VGA Connector (16 pins) 20) FEATURE (optional) p. 30 Onboard VGA Feature Connector (26 pins) ASUS SP97-XV User’s Manual...

  • Page 12: Installation Steps

    3. Hold components by the edges and try not to touch the IC chips, leads or connectors, or other components. 4. Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system. ASUS SP97-XV User’s Manual...

  • Page 13: Jumper Settings

    BIOS to “Load Setup Defaults” and re-enter any user information after removing and reapplying this jumper. RTC RAM RTCLR Operation [1-2] (Default) Clear Data [2-3] (momentarily) RTCLR RTCLR Battery Test Operation (Default) Clear Data Real Time Clock (RTC) RAM ASUS SP97-XV User’s Manual...
  • Page 14 2.0x(2/1) ---- ---- ---- CPU E 3.5x(7/2) 2.0x(2/1) 2.5x(5/2) 3.0x(3/1) 4.0X(4/1) (4.5X)(9/2) CPU : BUS Frequency Ratio WARNING! Frequencies above 66MHz exceed the specifications for the onboard Intel Chipset and are not guaranteed to be stable. ASUS SP97-XV User’s Manual...
  • Page 15 The only IBM/Cyrix 6x86(L) (or M1) that is sup- ported on this motherboard is rev 2.7 or later. Look on the underside of the CPU for the serial number. The number should read G8DC6620A or later. ASUS SP97-XV User’s Manual...
  • Page 16 ---- 2.1V(Dual) [2-3] [2-3] [1-2] 2.1 Volts 2.5 Volts 2.7 Volts 2.8/3.4 Volts 2.9/3.5 Volts 3.2 Volts Note: Auto-voltage detection regulators allow some Voltage Regulator Output Selection jumper settings to be the same for two voltages. ASUS SP97-XV User’s Manual...

  • Page 17: System Memory (Simm & Dimm)

    168-pin SDRAM or EDO DIMM (SIMM Sockets must be empty) DIMM Socket 2 8MB, 16MB, 32MB, 64MB, 128MB (Rows 2 & 3) 168-pin SDRAM or EDO DIMM (SIMM Sockets must be empty) Total System Memory (Max 256MB) ASUS SP97-XV User’s Manual...

  • Page 18: Simm Memory Installation

    4. The plastic guides should go through the two mounting holes on the sides and the support clips should snap on the other side. 5. To release the memory module, push both support clips outward and rock the module out of the support clips. ASUS SP97-XV User’s Manual...

  • Page 19: Dimm Memory Installation Procedures

    DIMM slot on the motherboard. You must ask your retailer for the specifications before purchasing. Four clock signals are supported on this motherboard. ASUS SP97-XV User’s Manual...
  • Page 20 III. INSTALLATION (This page was intentionally left blank) ASUS SP97-XV User’s Manual...

  • Page 21: Central Processing Unit (Cpu)

    CPU. Once completely inserted, hold down on the fan and close the socket’s lever. IMPORTANT: You must set jumpers for “CPU to BUS Frequency Ratio” and jumpers for “BUS Frequency Selection” depending on the CPU that you install. ZIF Socket 7 with Pentium MMX Processor ASUS SP97-XV User’s Manual...

  • Page 22: Expansion Cards

    Both ISA and PCI expansion cards may need to use IRQs. System IRQs are avail- able to cards installed in the ISA expansion bus first, and any remaining IRQs are then used by PCI cards. Currently, there are two types of ISA cards. ASUS SP97-XV User’s Manual...

  • Page 23: Assigning Dma Channels For Isa Cards

    IMPORTANT: To avoid conflicts, reserve the necessary IRQs and DMAs for legacy ISA cards (under PNP AND PCI SETUP of the BIOS SOFTWARE, choose Yes in IRQ xx Used By ISA and DMA x Used By ISA for those IRQs and DMAs you want to reserve). ASUS SP97-XV User’s Manual...

  • Page 24: External Connectors

    The system will direct IRQ12 to the PS/2 mouse if one is detected. If not de- tected, expansion cards can use IRQ12. See “PS/2 Mouse Control” in BIOS Features Setup of the BIOS SOFTWARE. PS/2 Mouse (6-pin Female) ASUS SP97-XV User’s Manual...
  • Page 25 COM 1 COM 2 Serial Ports (9-pin Male) 5. Universal Serial BUS Ports 1 & 2 (Two 4-pin Female Sockets) Two USB ports are available for connecting USB devices. USB 1 Univeral Serial Bus (USB) 2 ASUS SP97-XV User’s Manual...
  • Page 26 (Pin 5 is removed to prevent inserting in the wrong orienta- tion when using ribbon cables with pin 5 plugged). NOTE: Orient the red stripe to Pin 1 Pin 1 Floppy Disk Drive Connector ASUS SP97-XV User’s Manual...
  • Page 27 Primary or Secondary IDE connectors will cause the LED to light up. TIP: If the case-mounted LED does not light, try reversing the 2-pin plug. IDE Signal IDE Activity LED ASUS SP97-XV User’s Manual...
  • Page 28 +12.0 Volts +5.0 Volts +5.0 Volts +5V Standby Power Good -5.0 Volts Ground Ground 5.0 Volts Ground Ground Ground Power Supply On +5.0 Volts Ground Ground +3.3 Volts -12.0 Volts +3.3 Volts +3.3 Volts ATX Power Connector ASUS SP97-XV User’s Manual...
  • Page 29 +5 Volts PLED# MLED KLock# ExtSMI# Keyboard Lock SMI Lead Ground Ground PWRBT# ATX Power +5 Volts Ground Speaker Switch* Ground Connector Ground ResetCon Reset SW SPKR Ground Requires an ATX power supply. System Panel Connections ASUS SP97-XV User’s Manual...
  • Page 30 20. Video Feature Connector (26 pins) (with onboard VGA version only) This connector is used for third-party video accessories such as video capture cards or television tuners. Video Feature Connector ASUS SP97-XV User’s Manual...

  • Page 31: Power Connection Procedures

    Start button and the system will give three quick beeps after about 30 seconds and power off after Windows shuts down. NOTE: The message, It’s now safe to turn off your computer, will not be shown in Windows 95 when using shut down with ATX power supplies. ASUS SP97-XV User’s Manual...

  • Page 32: Bios Software

    This gives you a backup copy of the original motherboard BIOS in case you need to reinstall it. Create a system disk by typing FORMAT A:/S on the DOS prompt (do not create “AUTOEXEC.BAT” and “CONFIG.SYS”), then save the PFLASH.EXE file and the BIOS to the system disk. ASUS SP97-XV User’s Manual...

  • Page 33: Advanced Feature Menu

    Block and ESCD” require that the system is running in real mode. This utility will not operate if the system is under protected mode or virtual mode. You must boot from a system floppy disk without the “AUTOEXEC.BAT” and “CONFIG.SYS” files. ASUS SP97-XV User’s Manual...

  • Page 34: Managing And Updating Your Motherboard's Bios

    PnP BIOS and therefore cannot be programmed by the Flash Memory Writer utility. 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) or a BBS (Bulletin Board Service) (see ASUS CONTACT INFORMATION on page 3 for details) and save to the disk you created earlier.

  • Page 35: Bios Setup

    You can also restart by turning the system off and then back on again. Do this only, however, if the first two methods fail. When you run Setup, the CMOS SETUP UTILITY main program screen will ap- pear with the following options: ASUS SP97-XV User’s Manual...

  • Page 36: Load Defaults

    User-configurable fields appear in a different color. If you need information on the selected field, press <F1>. The help menu will then appear to provide you with the information you need. The memory display at the lower right-hand side of the screen is read-only and automatically adjusts accordingly. ASUS SP97-XV User’s Manual...

  • Page 37: Details Of Standard Cmos Setup

    (landing zone), SECTOR (number of sectors) and MODE. The SIZE field auto- matically adjusts according to the configuration you specify. The documentation that came with your hard disk should provide you with the information regarding the drive specifications. ASUS SP97-XV User’s Manual...
  • Page 38 VGA or any higher resolution card, choose EGA/VGA. Halt On (All Errors) This field determines which types of errors will cause the system to halt. Choose from either All Errors; No Errors; All, But Keyboard; All, But Diskette; or All, But Disk/Key. ASUS SP97-XV User’s Manual...

  • Page 39: Bios Features Setup

    SCSI. This allows multiple operating systems to be used on both IDE and SCSI drives or the primary operating system to boot using a SCSI hard disk drive. ASUS SP97-XV User’s Manual...
  • Page 40 ROMs on them, you will need to know which addresses the ROMs use to shadow them specifically. Shadowing a ROM reduces the memory available between 640KB and 1024KB by the amount used for this purpose. ASUS SP97-XV User’s Manual...

  • Page 41: Chipset Features Setup

    The default setting of 60ns DRAM sets the optimal timings for items 2 through 9 for 60ns DRAM modules. If you are using 70ns DRAM modules, you must change this item to 70ns DRAM. See section III for DRAM installation information. DRAM Leadoff Time (Leave on default setting of 5T) ASUS SP97-XV User’s Manual...
  • Page 42 When enabled, this field allows you to connect your floppy disk drives to the on- board floppy drive connector instead of a separate controller card. If you want to use a different controller card, set this field to Disabled. ASUS SP97-XV User’s Manual...
  • Page 43 Because each IDE device may have a different mode timing (0, 1, 2, 3, 4), it is necessary for these to be independent. PIO and DMA settings can be independently set. The de- fault setting of Auto will allow autodetection to ensure optimal performance. ASUS SP97-XV User’s Manual...

  • Page 44: Power Management Setup

    Video Off Option (Susp,Stby -> Off ) This field determines when to activate the video off feature for monitor power management. The settings are All Modes -> Off; Always On; Suspend -> Off; and Susp,Stby -> Off . ASUS SP97-XV User’s Manual...
  • Page 45 You can individually Enable or Disable each IRQ to include in the sleep function. IRQ8 (RTC Alarm) is usually set to Disable so that any software alarm clock or event calendar can wake up the system. ASUS SP97-XV User’s Manual...

  • Page 46: Pnp And Pci Setup

    Auto, which uses autorouting to determine IRQ use. The other options are the manual settings of NA, 5, 7, 9, 10, 11, 12, 14, or 15 for each slot. PCI Latency Timer (32 PCI Clock) The default setting of 32 PCI Clock enables maximum PCI performance for this motherboard. ASUS SP97-XV User’s Manual...
  • Page 47 IRQs for these devices are, by default, automatically assigned by the BIOS. You may manually select the settings: 5, 7, 9, 10, 11, 12, 14, and 15. If you are not using any USB devices, you may set this field to N/A. ASUS SP97-XV User’s Manual...

  • Page 48: Load Bios Defaults

    <Enter>. The system displays a confirmation message on the screen. Press <Y> and then <Enter> to confirm. Press <N> and then<Enter> to abort. This feature does not affect the fields on the Standard CMOS Setup screen. ASUS SP97-XV User’s Manual...

  • Page 49: Supervisor Password And User Password

    <Enter> instead of entering a new password when the “Enter Password” prompt appears. A message confirms the password has been disabled. NOTE: If you forget the password, see CMOS RAM in section III for procedures on clearing the CMOS. ASUS SP97-XV User’s Manual...

  • Page 50: Ide Hdd Auto Detection

    The autodetection feature can only detect one set of parameters for a particular IDE hard disk. Some IDE drives can use more than one set. This is not a problem if the drive is new and there is nothing on it. ASUS SP97-XV User’s Manual...

  • Page 51: Save And Exit Setup

    Select this option to exit the Setup utility without saving the modifications you specify during the current session. To exit without saving, highlight “Exit Without Saving” on the main screen, type “Y”, and then press <Enter>. ASUS SP97-XV User’s Manual...

  • Page 52: Support Software

    V. SUPPORT SOFTWARE Desktop Management Interface (DMI) Introducing the ASUS DMI Configuration Utility This motherboard supports DMI within the BIOS level and provides a DMI Con- figuration Utility to maintain the Management Information Format Database (MIFD). DMI is able to autodetect and record information pertinent to a computer’s system such as the CPU type, CPU speed, and internal/external frequencies, and memory size.

  • Page 53: Using The Asus Dmi Configuration Utility

    V. SUPPORT SOFTWARE Using the ASUS DMI Configuration Utility Edit DMI (or delete) Use the (left-right) cursors to move the top menu items and the (up-down) cursor to move between the left hand menu items. The bottom of the screen will show the available keys for each screen.
  • Page 54 You can load the BIOS defaults from a MIFD file and can clear all user modified and added data. You must reboot your computer in order for the defaults to be saved back into the Flash BIOS. ASUS SP97-XV User’s Manual...

  • Page 55: Asus Pci Scsi Cards

    VI. ASUS PCI SCSI Cards Symbios SCSI BIOS and Drivers NOTE: The ASUS PCI-SC860 is not supported on the SP97-XV because the EEPROM space is required for the onboard VGA BIOS. Aside from the system BIOS, the Flash memory chip on the motherboard also con- tains the Symbios SCSI BIOS.

  • Page 56: Setting Up The Asus Pci-Sc200 & Pci-Sc860

    VI. ASUS PCI SCSI Cards Setting Up the ASUS PCI-SC200 & PCI-SC860 There are two jumper settings you may need to make on the ASUS PCI-SC200 to set it up. One setting assigns the PCI INT interrupt, the other sets the card’s termination.

  • Page 57: Terminator Settings For The Asus Pci-Sc860

    Not Terminated Terminator Setting (Terminated / Not Terminated) Decide whether or not you need to terminate the ASUS PCI-SC200 based on its position in the SCSI chain. Only the devices at each end of the chain need to be terminated. If you have only internal or only external devices connected to the ASUS PCI-SC200, then you must terminate the ASUS PCI-SC200.

  • Page 58: Scsi Id Numbers For Scsi Devices

    SCSI identification number that is not in use by any other SCSI device. There are eight possible ID numbers, 0 through 7. The ASUS PCI-SC200 and ASUS PCI-SC860 cards have fixed SCSI IDs of 7. The SCSI ID serves two purposes: •...

  • Page 59: Video Software User's Manual (With Onboard Vga)

    SP97-XV Pentium Motherboard ® VIDEO SOFTWARE USER’S MANUAL...
  • Page 60 7.0 Driver & OS/2 Version Notes ............93 7.1 Driver Files ................. 93 7.2 Installation .................. 93 8. Double Bytes OS/2 Warp ..............94 8.0 Driver & OS/2 Version Notes ............94 8.1 Driver Files ................. 94 8.2 Installation .................. 95 ASUS SP97-XV User’s Manual...

  • Page 61: Viii. Dos Utility

    2. The Main Menu would appear and direct you to configure SiS 5597/5598. 3. When you complete configuration, you may save your preferences to “AUTOEXEC.BAT file and use it as your power-on (or hardware reset) default environment. ASUS SP97-XV User’s Manual...

  • Page 62: What The Parameters Stand For

    For example : Set Suspend Timer be 5 minutes. >SVGAUTL /PB:5 <Enter> Note: 1. Suspend Time would be “ta + tb”. (i.e. standby time + suspend time) 2. The timers will not be very accurate and would just be around the time. ASUS SP97-XV User’s Manual...

  • Page 63: A1. Video Modes

    9x16 320x200 40x25 A000 640x200 80x25 A000 640x350 80x25 B000 8x14 640x350 80x25 A000 8x14 640x480 80x30 A000 8x16 640x480 80x30 A000 8x16 320x200 40x25 A000 NOTE: 1. A/N: Alpha/Numeric 2. APA: All Point Addressable (Graphics) ASUS SP97-XV User’s Manual...
  • Page 64 25.1 M 640x350 31.5 K 25.1 M 640x350 31.5 K 25.1 M 640x480 31.5 K 25.1 M 640x480 31.5 K 25.1 M 320x200 31.5 K 25.1 M NOTE: i - interlaced mode n - noninterlaced mode ASUS SP97-XV User’s Manual...
  • Page 65 16.8M 100x37 A000 8x16 1024x768 128x48 A000 8x16 1024x768 128x48 A000 8x16 1024x768 16.8M 128x48 A000 8x16 1280x1024 160x64 A000 8x16 1280x1024 64K 160x64 A000 8x16 NOTE: 1. A/N: Alpha/Numeric 2. APA: All Point Addressable (Graphics) ASUS SP97-XV User’s Manual...
  • Page 66 640x480 31.5 K 25.1 M 640x480 37.9 K 31.5 M 640x480 37.5 K 31.5 M 43++ 640x480 43.4 K 36.0 M 640x480 31.5 K 25.1 M 640x480 37.9 K 31.5 M 640x480 37.5 K 31.5 M ASUS SP97-XV User’s Manual...
  • Page 67 NOTE: i - interlaced mode n - noninterlaced mode * For the limitation of memory bandwidth in 1MB DRAM configuration, the following video modes is not supported in 1MB configuration: modes 45*, 45+, 46+, 46#, 47+, and 47#. ASUS SP97-XV User’s Manual...

  • Page 68: Ix. Software Drivers

    3D Studio Ver. 3.0 • AutoCAD/386 Release 11, 12 • Auto Shade/386 Ver. 2.0 • MicroSoft Windows 3.1 • MicroSoft Windows NT Ver. 3.1, 3.5, 3.51, 4.0 • MicroSoft Windows 95 • OS/2 Presentation Manager 2.1 & 3.0 ASUS SP97-XV User’s Manual...

  • Page 69: Windows 3.1

    1.0 Version Notes The following description apply to “SiS 5597/5598 Driver Release V1.03” and maybe later release version but not guaranteed. 1.1 Driver Files 1. The enclosed SiS 5597/5598 Windows 3.1 driver contains SETUP.EXE and other installation-related files. ASUS SP97-XV User’s Manual...
  • Page 70 3. After completing your selections, choose “OK” to make all your selections effective. 4. Choose “Restart Winodws” to re-boot Windows using new settings. Or, choose “Continue” to continue your current Windows processes. (But when you re-boot Windows, the new settings would take effect.) ASUS SP97-XV User’s Manual...
  • Page 71 3. After completing the selections, choose “OK” to make all your selections effective. 4. After complete setup, you may use your own defined hot key to zoom-in or zoom-out screen. 1.2.5 Notes 1. The power saver’s timer settings would be effective even exit Windows back to DOS. ASUS SP97-XV User’s Manual...

  • Page 72: Video Operations

    To use the SiS MMPlayer, you just follow the procedures below: 1. In “SiS Multimedia Vx.xx” program group, choose “SiS MMPlayer” icon and SiS MMPlayer VCP-like icon would appear. 2. Enjoy the SW MPEG playback as you like. ASUS SP97-XV User’s Manual...

  • Page 73: Mmplay.exe Button Description

    Open File & Type Control Minimize This Application Eject CD Title (Not implemented yet.) Fast Backward Fast Forward Mark in Mark out Pause Play Stop Begin : Volume increase (Not implemented yet.) : Volume decrease (Not implemented yet.) ASUS SP97-XV User’s Manual...
  • Page 74 (This page was intentionally left blank) ASUS SP97-XV User’s Manual...

  • Page 75: Windows 95

    12. Windows 95 would go back to “Display Properties” Screen, select “Close” or “Apply” item. 13. In “System Settings Change” Screen, select “Yes” item to restart your computer. 14. After restarting, Windows 95 will run on 640x480x256 color, 60NI. ASUS SP97-XV User’s Manual...

  • Page 76: Using "Display Modes

    1. “SiS 5597/5598 Settings” Screen appears again, 2. Select “Yes” and you may work on your selected mode now. b). You changed “color” and/or “font size”. 1. System will reboot. 2. You may work on your selected mode now. ASUS SP97-XV User’s Manual...
  • Page 77 (3) Center Screen: An utility to adjust the position of display on the screen. 6. “SiS Multimedia V x.xx” program group has been created, select “Restart Now”. 2.4.2 Operation 1. For Video Operations (“SiS MMPlayer”), please refer to section 1.3. ASUS SP97-XV User’s Manual...
  • Page 78 If the display test screen was bad then select “No”. Win- dows NT will give you an error message. 6. If the display test screen was good and you select “Yes”, Windows NT 3.51 will prompt you to restart Windows NT 3.51. ASUS SP97-XV User’s Manual...

  • Page 79: Windows Nt

    “No”. Windows NT 4.0 will give you an error message. 7. Click “OK”. If the display test screen was good and you select “Yes”, Windows NT 4.0 will change the mode without restarting Windows NT 4.0. ASUS SP97-XV User’s Manual...

  • Page 80: Autodesk Adi 4.2 -Protected Mode

    & copy all related driver files to where you assign. 4. After “unpack and copy” completed, exit the INSTDRV.EXE program. 5. Refer to Sec. 5.1 to Sec. 5.4 for the real installation procedures for each program. ASUS SP97-XV User’s Manual...

  • Page 81: Autocad R11 Setup

    5. In “Select Display Device:” item, choose “ADI P386 V4.0/4.1 display” 6. In “Select Display Resolution” screen, choose which display driver you want to use. 7. Go through the whole instrutions, and the system would start with the desired display setting. ASUS SP97-XV User’s Manual...

  • Page 82: Autocad R1.2 Setup

    7. In “Available Video Displays:” item, choose the “SiS Super VGA ADI v4.2 Display and Rendering driver” item. 8. In “Select Display Resolution” screen, choose which display driver you want to use. 9. Go through the whole instructions, and the system would start with the selected display setting. ASUS SP97-XV User’s Manual...

  • Page 83: Autoshade R2.0 Setup

    5. While prompting “Select display device:”, choose “P386 AutoDesk Device In- terface display driver.” 6. While prompting “Select rendering display driver:”, choose “P386 AutoDesk Device Interface rendering driver.” 7. Go through all the instructions, the system would start with the desired display setting. ASUS SP97-XV User’s Manual...

  • Page 84: D Studio Version 3.0 Setup

    (b) In selection menu, move cursor to “RCPADI”. Press <Enter> to select. In “Render-Display” item, (a) Press <Enter> The selection menu will appear. (b) In selection menu, move cursor to “RCPADI” or “RDPADI”. Press <Enter> to select. Complete the other selections and exit configuration. ASUS SP97-XV User’s Manual...
  • Page 85 13. Once completing the detail configuration, you may enter 3D Studio in the same configuration simply by type \3DS3\3DS <Enter> next time. 14. If you want to change your video configuration, just follow the procedures men- tioned before to re-configure. ASUS SP97-XV User’s Manual...

  • Page 86: Os/2 V2.1

    4. Choose which one you would like to use and click “OK”. 5. Then installation program would complete all installation process and create a “SiS Setup” for future change mode usage. 6. Shutdown and re-boot OS/2 to make your selection effectively. ASUS SP97-XV User’s Manual...

  • Page 87: Os/2 V3.0 (Warp)

    4. Choose which one you would like to use and click “OK”. 5. Then installation program would complete all installation process and create a “SiS Setup” for future change mode usage. 6. Shutdown and re-boot OS/2 to make your selection effectively. ASUS SP97-XV User’s Manual...

  • Page 88: Double Bytes Os/2 Warp

    8.1 Driver Files The enclosed SiS 5597/5598 Double Byte OS/2 3.0 driver contains the following files: SETUP.CMD SiS driver install program SVGA.EXE SiS PMI Generator S768256.DL@ SiS IBMDEV32.DLL Display Driver OTHERS other files required during installation ASUS SP97-XV User’s Manual...
  • Page 89 6. Select the desired resolution (and color) and frame rate on this screen, then click “OK” to complete installation and “SiS Setup” icon would be created for future change modes and frame rate usage. 7. After completing installation, shutdown and re-boot OS/2 to make your selection effectively. ASUS SP97-XV User’s Manual...
  • Page 90 (This page was intentionally left blank) ASUS SP97-XV User’s Manual...

Table of Contents