Attach the TV to
Connect video
the Stand
devices
Step
Step
1
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1
Attach the TV to the Stand
1
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
2
Base
Screws
3
QUICK START
GUIDE
BN68-05029A-00
Insert the
Power on and
batteries into the
start the initial
remote control
setup
Step
Step
2
3
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
Put a base and screws off to assemble the stand
out of the box.
Screws
32 inch models: 7EA
40 inch and above models: 8EA
Fit the stand and mount together, making sure
the notch on the mount aligns with the stand.
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control
Cable manager
4
Remote Control
Batteries (AAA x 2)
Also included: Cleaning Cloth, User Manual
4
5
1
2
6
Stand Parts and Cables
Stand Mount
x 4
IR extender
Wall mount adapter (46 inch and above)
46 - 50 inches models: 2 pieces (BN96-18153B)
55 inches and above models: 4 pieces (BN96-18153A)
Insert 4 screws and secure the stand to the
mount.
x4 (M4 X L12) 32" ~ 55"
x4 (M4 X L10) 60" ~ 65"
Holding the stand parallel to the screen, slide
the stand into the notches on the back of the
TV.
3
Insert 4 screws and secure the stand to the TV.
x3 (M4 X L12) 32"
x4 (M4 X L12) 40" ~ 55"
x4 (M4 X L10) 60" ~ 65"
Power Cord