Download Print this page

Closing The Chassis - Cisco 1721 - VPN Security Router Bundle Hardware Installation Manual

Hardware installation guide

Hide thumbs Also See for 1721 - VPN Security Router Bundle:

Table of Contents

Appendix C

Installing and Upgrading Memory and Virtual Private Network Modules

Closing the Chassis

Step 1

Step 2

Step 3

78-13834-02

After installing memory or a VPN module on the motherboard, close the chassis

by following these steps:

If you disconnected the fan from the motherboard as described in the

the Chassis"

section, reconnect the fan cable to the connector labeled FAN on the

motherboard.

Locate the posts that protrude from the inside of the chassis cover, and locate the

corresponding openings on the chassis bottom.

Line up the posts with the corresponding openings, as shown in

carefully slide the posts into the openings, taking care not to damage the router

motherboard with the posts.

Cisco 1721 Router Hardware Installation Guide

Closing the Chassis

"Opening

Figure

C-8, and

C-9

Table of Contents