Page 1
TX-L42D25B Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. “B” model no. suffix denotes UK model.
Page 2
Features ■ freesat HD tuner built-in Receives freesat - free digital satellite broadcasts in the UK This TV has a built-in freesat HD tuner. freesat is a free digital TV service which broadcasts via satellite so you can receive TV, radio, interactive TV, and HD TV with crystal clear reception.
Contents Be Sure to Read ■ FULL HD ● This TV uses a high definition panel to produce high definition Safety Precautions (Warning / Caution) ················· 4 pictures close to their original resolution. ■ HD TV 1080p This TV supports high definition TV signals. ■...
Safety Precautions Warning ■ Mains plug and lead To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below: ● This TV is designed to operate on AC 220-240 V, 50 / 60 Hz. ● Insert the mains plug fully into the socket outlet.
Page 5
Do not insert foreign objects into the TV through the air vents. ● Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wall-hanging brackets.
7 □ Operating Instructions □ Product Registration Leaflet Optional accessories Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For additional details, please refer to the manual of the optional accessories. □ Wireless LAN Adaptor Caution ●...
Do not use with any other TVs or displays. ● Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately. ● During setup, make sure that all screws are securely tightened.
Identifying Controls Remote Control ■ Installing / removing remote’s batteries Pull Close open Note the correct Hook polarity (+ or -) Caution ● Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. ● Do not mix old and new batteries. ●...
Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
Page 11
Example 3 Example 2 Connecting DVD Recorder / VCR Connecting DVD Recorder / VCR and Cable TV box TV, DVD Recorder or VCR TV, DVD Recorder / VCR and Cable Rear of the TV Terrestrial Rear of the TV Terrestrial aerial aerial AC 220-240 V...
Auto Setup Search and store TV channels automatically. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 10 and p. 11) and settings (if necessary) of the connected equipment before starting Auto Setup.
Page 13
Setup the wireless LAN connection Setup the wireless LAN connection to enable the network service functions (p. 74). (If you do not wish to use wireless LAN connection or the network service functions, skip this step.) ● To setup the wireless LAN connection, the Wireless LAN Adaptor (optional accessory) is required. For the information about the Wireless LAN Adaptor “Optional accessories”...
Page 14
Auto Setup Input Owner ID Please enter your own choice of PIN number, name, etc. to help the police Owner ID Please enter new PIN to crack crime. * * * ● Make a note of the PIN number in case you forget it. The PIN number cannot be reset.
Page 15
Select “Home” Select “Home” viewing environment (highlight “Home” in yellow) to use in your home environment. ■ Please select your viewing environment. “Shop” viewing environment Home Shop select (for shop display only) “Shop” viewing environment is the demonstration mode to explain main features of this TV. Select “Home”...
Watching TV Turn power on (Press for about 1 second) ● Mains power On / Off switch should be On. (p. 9) INPUT MENU ASPECT Select the mode (freesat, DVB, Analogue or EXIT Other Sat.) watch TV Selection freesat select Analogue Displayed if Other Satellite Other Sat.
Page 17
■ Other useful functions Hold HOLD Freeze / unfreeze picture Display Information banner Display Information banner ● Also appears when changing a channel Same programme available as HD broadcast ● For details, display the extra information Channel position Channel type and name if it is HDTV, Radio TV mode...
Page 18
Watching TV ■ Other useful functions Display subtitles ■ freesat, DVB or Other Sat. mode Display / hide subtitles (if available) STTL ● To change the language for DVB (if available) “Preferred Subtitles” (p. 35) ■ Analogue mode Display subtitles STTL EXIT ●...
Page 19
■ Other useful functions Display the selectable settings for the current status OPTION Check or change the current ● status instantly To change change select Multi Audio / AD (freesat mode) Subtitle Language Allows you to select between alternative language (freesat, DVB or Other Sat.
Using TV Guide TV Guide―Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). ● When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time before the TV Guide is completely shown.
Page 21
DVB or Analogue mode ● This TV supports the GUIDE Plus+ system. ● The Gemstar branding partner will supply the rating informations in the programme information and the recommended group in the Search list. ● DVB and Analogue channels are displayed on the same TV Guide screen. “D” means DVB channel and “A” means Analogue channel.
Page 22
Using TV Guide ■ Other useful functions Timer Programming (freesat or DVB mode) Timer Programming can remind you to watch a programme or record one on an external recorder or a USB HDD. Select the Select the function (Ext Rec., USB HDD Rec. or Reminder) forthcoming programme store...
Page 23
Guide link programming (Timer Programming from the TV Guide signal) Guide link programming is Timer Programming which is controlled by information from the TV Guide; if programme start and end times are changed by the broadcaster, the timer programming event will follow the change.
Page 24
Using TV Guide Other Sat. mode In Other Sat. mode, TV Guide is not available. In stead, Channel List will appear. ● To tune in Other Sat. Channels p. 49 Select Other Sat. p. 16 INPUT EXIT Display the Channel List BACK/ RETURN All Other Sat.
Viewing Teletext You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster) ● The availability of teletext services for a programme is indicated by “TEXT” in the information banner. Information banner (p. 17) 1 BBC ONE Wales 20:35 All DVB Channels Coronation Street...
Page 26
Viewing Teletext Analogue teletext Analogue teletext services Analogue teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FASTEXT mode? In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button.
Page 27
INDEX Return to the main index page INDEX Subtitles View a favourite page stored ● Factory setting is “P888” (subtitle service) on the blue button (List mode). STTL View in multi window Watch TV and Teletext in two windows at once ●...
Watching External inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the AV input. ● To connect the equipment p. 11 and p. 92 The Remote Control is capable of operating some functions of selected external equipment. Turn the TV on ■...
Page 29
If the above information is permanently displayed on the top left of the screen, press the button to clear. Operating the equipment with the TV remote control The Panasonic equipment connected to the TV can be directly operated with the below buttons of this TV remote control. Selection Switch for operating the connected equipment Select “DVD/VCR”...
How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. ● For “VIERA Link Control” and “Pause Live TV” functions to operate correctly, ensure the connections and settings are completed. “Summary of Q-Link and VIERA Link features” (p. 84 and p. 85), “Preparations” (p. 87) After connection, turn the equipment on and then switch the TV on.
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu ● Displays the functions that can be set MENU (varies according to the input signal) MENU Select the menu EXIT access Main Menu...
How to Use Menu Functions ■ Menu list Menu Item Adjustments / Configurations (alternatives) Basic picture mode (Dynamic / Normal / Cinema / True Cinema / Game / Photo / Professional1 / Professional2) In each Viewing Mode, Contrast, Brightness, Colour, Sharpness, Tint, Colour Balance, Vivid Colour, C.A.T.S., P-NR and 3D-COMB can be adjusted and stored to suit your particular viewing requirement.
Page 33
Menu Item Adjustments / Configurations (alternatives) Selects the basic sound mode (Music / Speech / User) ● The selected mode affects all input signals. Music: Improves sound quality for watching music videos, etc. Speech: Improves sound quality for watching news, drama, etc. ●...
Page 34
How to Use Menu Functions Menu Item Adjustments / Configurations (alternatives) Timer Programming Sets a timer to remind watching or record forthcoming programmes (p. 52) Sets the time until the TV automatically goes to Standby mode Off Timer (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 19) USB HDD Setup Register the connected USB HDD and makes the settings for the recording (p.
Page 35
Menu Item Adjustments / Configurations (alternatives) Channel List Skips the unwanted Analogue channels or edits Analogue channels (p. 47) Auto Setup Automatically sets the Analogue channels received in the area (p. 41) Manual Tuning Sets the Analogue channels manually (p. 47) Favourites Edit Creates a list of favourite Other Satellite channels (p.
Page 36
How to Use Menu Functions Menu Item Adjustments / Configurations (alternatives) Selects the language that your USB Keyboard supports ● USB Keyboard Use a USB Keyboard to enter characters in VIERA CAST (p. 83). ● Layout Characters may not be displayed correctly on the TV screen depending on the connected keyboard or the keyboard layout setting.
Page 37
■ Overview (Picture, Sound) ● How to operate p. 31 Main Menu Picture Picture Menu Viewing Mode Dynamic Sound Contrast Brightness Setup Colour Sharpness Available in NTSC Tint Colour Balance Warm Not available when Vivid Colour Reversal Film Effect “Viewing Mode” is set to “True Cinema”...
Page 38
How to Use Menu Functions ■ Overview (Setup) USB HDD Setup Access Device Setup Timer Programming USB HDD Remaining Capacity 500GB (50%) Wed 28.10.2009 10:46 ● Fun ction N o. C hann el N a m e Date Start One Touch Recording 180 minutes How to operate p.
Page 39
Link Settings VIERA Link HDMI Content Detection Q-Link Sending Preset Data AV2 out Please wait! Standby Power Save 100% Intelligent Auto Standby On (No reminder) Q-Link Download Access Remote control unavailable (p. 34) (p. 34) Child Lock List - TV and AV Name Input Type...
Retuning from Setup Menu Auto Setup retunes all channels automatically. freesat channels Automatically retune all the freesat channels received in the area. ● Only freesat channels are retuned. ● All the previous tuning settings (Favourites Edit and Channel List, etc.) are erased. ●...
Page 41
DVB or Analogue channels Automatically retune all DVB or Analogue channels received in the area. ● Only DVB channels are retuned in DVB mode. ● Only Analogue channels are retuned in Analogue mode. ● All the previous tuning settings (Channel List, etc.) are erased. ●...
Tuning and Editing Channels (freesat) You can retune channels or make your favourite channel list, skip unwanted channels, etc. Select freesat p. 16 INPUT Display the menu MENU MENU EXIT Select “Setup” access BACK/ Main Menu RETURN Picture Sound Setup select Select “freesat Tuning Menu”...
List favourite freesat channels Favourites Edit Create your favourite channel list from various broadcasters. The freesat Favourites list is available from “Channel Genre” in the TV Guide (p. 20). Select a channel to list freesat Favourites Editor All freesat Channels Favourites BBC 1 Wales BBC 2 Wales...
Tuning and Editing Channels (DVB) You can retune channels or make your favourite channel lists, skip unwanted channels, etc. Select DVB p. 16 INPUT Display the menu MENU MENU EXIT Select “Setup” access Main Menu Picture BACK/ Sound RETURN Setup select Select “DVB Tuning Menu”...
Page 45
List favourite DVB channels Favourites Edit Create your favourite channel lists from various broadcasters (up to 4: Favourites1 to 4). The DVB Favourites lists are available for switching in the Information banner (p. 17) and from “Category” in the TV Guide (p. 21). Select a channel to list DVB Favourites Editor All DVB Channels...
Tuning and Editing Channels Update DVB channel automatically Update Channel List You can add new channels, delete removed channels, update channel name and position automatically to Channel List. ● DVB Update Channel List Channel List is updated while keeping your settings in Favourites Edit, Analogue Scan Progress CH 21...
Page 47
Skip unwanted Analogue channels, Edit Analogue channels Channel List You can hide unwanted Analogue channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and reveal / hide reveal / hide Analogue Channel List ●...
Page 48
Tuning and Editing Channels (Other Sat.) You can tune all receivable digital satellite channels or skip unwanted channels, etc. ● Some of Other Sat. functions may work to differing specifications (depending on the broadcasters). Select freesat or Other Sat. p. 16 INPUT Display the menu MENU...
Set all receivable digital satellite channels Auto Setup Any receivable digital compliant satellite channels can be tuned. ● Only Other Sat. channels are retuned. ● All the previous tuning settings are erased. ● If a Child Lock PIN number (p. 54) has been set, it must be entered. Select the satellite ●...
Page 50
Tuning and Editing Channels List favourite Other Sat. channels Favourites Edit Create your favourite channel lists from various broadcasters (up to 4: Favourites1 to 4). The Other Sat. Favourites lists are available for switching in the Information banner (p. 17). Select a channel to list Other Sat.
Shipping Condition Resets the TV to its original condition with no channels tuned in. All settings other than “Owner ID” and “USB HDD registration” are reset (channels, picture, sound settings, etc.). Display the menu MENU MENU EXIT Select “Setup” access Main Menu Picture Sound...
Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder or the USB HDD. At the correct time, the TV will tune to the correct channel automatically to record even if the TV is in Standby mode.
Page 53
Set timer programming event details Timer Programming Start making the settings Select the function (Ext Rec., USB HDD Rec. or Reminder) Ext Rec. / : to record the programme to the external recorder (Ext Rec.) or the USB HDD Rec. USB HDD (USB HDD Rec.) When the start time comes, the channel will be switched automatically select...
Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears; by entering the PIN number, you can watch it. Display the menu MENU MENU EXIT Select “Setup”...
Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminals that are not connected to any equipment. ● To select the input mode p. 28 Display the menu MENU MENU EXIT Select “Setup”...
Owner ID Entry of the PIN number and personal information (your name, address and postcode). In the unfortunate event of theft, the Owner ID will help the Police to determine the owner. Display the menu MENU MENU EXIT Select “Setup” access Main Menu Picture...
Using Common Interface The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules. This TV works only Pay TV modules complying with CI standard. ● This function is not available for BSkyB’s Sky channels. Caution CI slot ●...
Updating the TV Software From time to time, a new version of software may become available for download to enhance the performance or operations of the TV. In DVB mode, a notification banner will appear when one of the BBC channels is turned to if a new available software is found.
Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. ● To connect PC p. 92 Select the external input INPUT Select “PC”...
Advanced Picture Settings You can adjust and setup the detailed picture settings for each Viewing Mode. ● To use this function completely, set “Advance(isfccc)” to “On” in the Setup Menu. p. 35 ● For PC input mode, some functions are available without setting “Advance(isfccc)”. Select the input mode to adjust and setup p.
Adjust the detailed picture settings Advanced Settings ● To make settings “How to Use Menu Functions” (p. 31) Advanced Settings R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Gamma Reset to Defaults Reset Menu Item Adjustments / Configurations (alternatives) R-Gain Adjusts the white balance of bright red area G-Gain Adjusts the white balance of bright green area B-Gain...
Regarding the performance, not all USB HDDs are guaranteed. Check the USB HDDs that have been tested for the performance with this TV at the following website. (English only) http://panasonic.jp/support/global/cs/tv/ Caution ● Register the USB HDD with this TV in order to use it for recording. Please note that USB HDD will be formatted and all data (including the data from your PC, etc.) in it will be erased when you register it.
Page 63
Register and setup the USB HDD Device Setup All the USB devices recognized as a mass storage device will be listed. You can only register USB HDDs. ● Up to 8 USB HDDs can be registered with this TV. However you can only choose one USB HDD for recording at a time.
Page 64
USB HDD Recording Recording the TV programme to USB HDD You can record the current programme immediately by using “One Touch Recording”. You can also record the current programme constantly for the selected period by using “Rewind LIVE TV” so that you can go back or pause the current programme. ●...
One touch direct TV recording - One Touch Recording What you see is What you record Recording the current programme in the USB HDD immediately. Select the maximum recording time (30 / 60 / 90 / 120 / 180 minutes) USB HDD Setup Device Setup select...
If miniSD Card is used, insert / remove it together with the adapter. ● Check the latest information on the card type at the following website. (English only) http://panasonic.jp/support/global/cs/tv/ ● USB Flash Memory format : FAT16, FAT32 or exFAT (A USB HDD formatted by PC is not surpported in Media Player.) ∗...
Starting Media Player Insert the SD Card or USB Flash Memory ● For registered USB HDD, ensure the connection status is “Yes”. p. 63 Switch to Media Player ● When SD Card is inserted, switching will be done automatically. SD CARD SD CARD Start Media Player MENU...
Page 68
Using Media Player Photo mode Photo mode will read all “.jpg” extension files in the SD Card or USB Flash Memory. Error display (images that could not be loaded, etc.) SD CARD The thumbnail of all the photos on the SD Card or Media Player Photo All photos...
Page 69
Photo Setup Choose the settings for Photo mode. Display Select “Photo Setup” Select the items and set access the menu Photo Setup Menu Main Menu Back Ground Music Type1 Picture Frame MENU Colour Effect select select Sound Transition Effect Fade Photo Setup Aspect Original...
Page 70
Using Media Player Video mode For SD Card or USB Flash Memory Video mode supports AVCHD, MPEG2 and DivX file formats. ® Film icon will be displayed Error display if the file does not support (images that could not be loaded, etc.) SD CARD thumbnail view.
Page 71
For registered USB HDD Remaining capacity of the HDD ● This value may not be accurate depending on the condition. Contents list of the registered USB HDD will be displayed. Media Player USB HDD recordings Remaining Capacity 500GB (50%) ● You can also access the contents list directly by using Channel Date...
Using Media Player Sound Settings You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT terminal. ■ To confirm or change the current sound status (during playback) Display the Option menu Change the sound (if the video has multiple audio signals) Example: OPTION ●...
Page 73
Music mode Music mode supports MP3 and AAC file format. The thumbnail of music folders in the SD Card or USB Media Player Music Folder view Flash Memory will be displayed. SD CARD ● You can also access Music mode directly by using My Music_1 My Music_2 My Music_3...
80 - 82 VIERA CAST™ VIERA CAST is a gateway to the internet services unique to Panasonic. By connecting the TV to the internet environment, VIERA CAST allows you to enjoy internet content on the TV screen such as photos, videos, weather, etc. from VIERA CAST home screen.
Page 75
Network connections To use only DLNA features, you can operate the features without Broadband network environment. To use VIERA CAST features or freesat interactive services, you need a Broadband network environment. ● If you do not have a Broadband network services, please consult your retailer for assistance. ●...
Page 76
Using Network Services (DLNA / VIERA CAST / freesat) Network Setup ● Ensure the connections are completed before starting Network Setup. “Network connections” (p. 75) Display the menu MENU MENU EXIT Select “Setup” access Main Menu Picture Sound Setup BACK/ select RETURN Select “Network Setup”...
Page 77
Network settings for the LAN Cable connection This setting is for the network connection by using the LAN cable. Select “Network Type” and set to “Wired” Network Setup If you make the network connection like Network Type Wired “Example2” (p. 63), you do not have to set Access Point Settings IP/DNS Settings “Acquire DNS Address”, “Proxy”...
Page 78
Using Network Services (DLNA / VIERA CAST / freesat) Network settings for the Wireless LAN connection This setting is for the network connection by using Wireless LAN Adaptor. (Wireless LAN connection) Select “Network Type” and set to “Wireless” Network Setup Network Type Wireless Access Point Settings...
Page 79
■ WPS(Push button) Press the WPS button on the access point until the light flashes. WPS(Push button) 1) Please press the ‘WPS’ buttton on the access And then, press the OK button to connect the Wireless LAN Adaptor and the point until its light flashes.
Page 80
Using Network Services (DLNA / VIERA CAST / freesat) Using DLNA features ® ● Ensure the preparation of media server, network connections and network settings are completed. “Media server” (p. 74), “Network connections” (p. 75), “Network Setup” (p. 76 - 79) Display the Input select menu INPUT MENU...
Page 81
For photo file ■ Single view - Photos are displayed one at a time. ● To display / hide the operation guide ● To operate Single view To the previous photo Rotate 90˚ (anti-clockwise) To the next photo Single view Rotate Slideshow EXIT...
Page 82
Using Network Services (DLNA / VIERA CAST / freesat) Photo Setup (for photo contents) and Video Setup (for video contents) Choose the settings for Photo and Video file operations. Display Select “Photo Setup” or Select the items and set “Video Setup” access menu Photo Setup Menu...
Page 83
● The services through VIERA CAST™ are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. ●...
Connect the equipment supporting VIERA Link to the TV’s HDMI1, HDMI2, HDMI3 or HDMI4 terminal via an HDMI cable. ● For information about using HDMI cables for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the equipment. ■...
Page 85
■ VIERA Link (HDMI and Audio out connections) Connected equipment Player theatre with Blu-ray Disc theatre with Amplifier with VIERA Link function VIERA Link function VIERA Link function Features Analogue channel download – – – ∗ ∗ Easy playback – Power on link –...
Page 86
Link Functions Q-Link VIERA Link Q-Link ■ Preparations ● Connect the DVD Recorder / VCR with the following logos: “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK” ● Q-Link connection p. 84 ● Use fully wired SCART cable. ● Set up the DVD Recorder / VCR.
Page 87
VIERA Link “ Control™” ∗ ∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 5” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p. 84 and p. 85).
Link Functions Q-Link VIERA Link ■ Features available Reduce unnecessary power consumption in standby Standby Power Save Set Standby Power Save “On” in the Setup Menu to use this function “Standby Power Save” (p. 34) The power consumption in Standby mode of the connected equipment is controlled in synchronization with the TV On / Off state.
Page 89
■ Features available (Using VIERA Link Menu) Pause Live TV programme Pause Live TV You can pause the live TV programme and resume the programme later. The live TV programme will be recorded on HDD of the connected DIGA Recorder. ●...
Link Functions Q-Link VIERA Link ■ Features available (Using VIERA Link Menu) Control the menu of the connected equipment by VIERA remote control VIERA Link Control You can control some functions of the connected equipment with this TV remote control (point the remote control at the TV’s signal receiver).
■ Features available (Using VIERA Link Menu) Speaker control Speaker Selection You can control the home theatre speakers with this TV remote control (point the remote control at the TV’s signal receiver). ● If you cannot control the home theatre speakers with this remote control, check the settings and the equipment “Summary of Q-Link and VIERA Link features”...
External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the table below, and the specifications (p. 107). Satellite dish To enjoy the sound from the external Satellite cable HDMI equipment equipment in multi-channel sound...
Page 93
USB devices Rear of the TV USB cable Network Internet LAN cable (Shielded) Modem Hub or Router To watch Cable cable broadcasts Fully wired HDMI compliant cable Cable TV box Camcorder / Fully wired SCART cable HDMI equipment Camcorder / Game equipment Fully wired HDMI (Viewing)
Electrical interference, static electricity, or erroneous operation may damage the data or card. ● Back up the recorded data at regular intervals in case of deteriorated or damaged data 24 mm or erratic operation of the TV. (Panasonic is not liable for any deterioration or damage of recorded data.)
Page 95
DivX ABOUT DIVX VIDEO: DivX ® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ■...
Technical Information Characters table for numeric buttons You can enter characters by using numeric buttons for free input items. User input Name Press the numeric button repeatedly until you reach the desired character. A B C D E F G H J K L M N O P Q R S T ●...
Page 97
HDMI connection HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. ∗ HDMI-compatible equipment with an HDMI or DVI output terminal, such as a DVD player, a set top box or a game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
Page 98
• Wireless LAN Adaptor + USB Keyboard Note ● Additional information for USB devices may be on the following web site. (English only) http://panasonic.jp/support/global/cs/tv/ Input signal that can be displayed COMPONENT (Y, P ), HDMI ∗ Mark: Applicable input signal...
FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre for assistance. For details p. 108 freesat Auto Setup cannot...
Page 100
FAQs Problem Actions ● Set “P-NR” in the Picture Menu (to remove noise). (p. 32) ● Chaotic image, noisy Check nearby electrical products (fluorescent lamp, DECT phones, mobile phones, microwave, etc.). ● Is “Contrast”, “Brightness” or “Colour” in the Picture Menu set to the No image can be displayed minimum? (p.
Page 101
TV Off with Mains power On / Off switch, then appears turn it On again. ● Check if foreign objects are inside the USB port. ● Follow the message’s instructions. ● An error message appears If the problem persists, contact your local Panasonic dealer or the authorized Service Centre.
Please check aerial or local signal availability. Please also refer to p. 99. ● Press OK to start Auto Setup. If channels are still not found, consult your local Panasonic dealer. ● No module inserted Check the CI module is inserted completely (p. 57).
Message Meaning / Action ● PIN incorrect! The PIN number you entered is wrong. Please check settings and connections ● Communication error in VIERA Link function (p. 87). on HDMI devices. ● Please enter a frequency between The frequency you entered is out of range. Consult the received satelite 10700 and 12750 MHz.
Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water).
The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. Panasonic has no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain such permission on your behalf.
Specifications TX-L32D25B TX-L37D25B TX-L42D25B Power Source AC 220-240 V, 50 / 60 Hz Rated Power Consumption 136 W 147 W 152 W 0.30 W Standby Power Consumption 36.00 W (With monitor out recording) Aspect Ratio 16:9 80 cm (diagonal) 94 cm (diagonal) 107 cm (diagonal) Visible screen size 698 mm (W) ×...
Page 108
• Most major credit and debit cards accepted. • All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd. • It couldn’t be simpler! • Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details.