Related Manuals for Honeywell HRDP4F250
Summary of Contents for Honeywell HRDP4F250
-
Page 1: User Guide
HRDP4F DVR Performance Series Digital Recording and Transmission System User Guide ______________________________________________________________________________________________ Document 800-02471 Rev A 02/09... - Page 2 Warnings and Safeguards ______________________________________________________________________________________________...
- Page 3 Performance Series DVR User Guide Revisions Issue Date Revisions 02/09 New document ______________________________________________________________________________________________ Document 800-02471 Rev A 02/09...
- Page 4 Warnings and Safeguards ______________________________________________________________________________________________...
-
Page 5: Warnings And Safeguards
Performance Series DVR User Guide Warnings and Safeguards FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 6: Important Safeguards
Object and Liquid Entry Points – Never insert foreign objects into the DVR, other than the media types approved by Honeywell, as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the product. - Page 7 Refer all servicing to qualified personnel. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by Honeywell. Unauthorized substitutions may result in fire, electric shock or other hazards.
- Page 8 Warnings and Safeguards Notes on Cleaning Use a soft dry cloth for cleaning. For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the surface of the DVR.
- Page 9 Performance Series DVR User Guide WARNING TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION C A U T I O N RISK OF ELECTRIC SHOCK...
- Page 10 Warnings and Safeguards ______________________________________________________________________________________________...
-
Page 11: Table Of Contents
Performance Series DVR User Guide Contents Warnings and Safeguards ......................5 Contents ............................ 11 Introduction ..........................15 Product Description ......................15 Features ..........................16 USB Flash Drive Approved List ..................16 PTZ Compatibility List ....................... 17 Quick Start Guide ......................18 Logging In for the First Time ..................... - Page 12 Contents Check ......................... 29 SMART Check ....................30 User Configuration ..................... 31 Server ......................... 31 Client ........................32 Configuration ......................33 Shutdown ........................33 Camera ..........................33 Camera Configuration ....................33 Color Setup (Adjust) ................... 34 PTZ Configuration ...................... 34 Spot / Sequence Configuration .................
- Page 13 Performance Series DVR User Guide SMART Search ....................53 Search Details ......................54 Search Popup Menu ....................54 Monitoring ......................... 55 Select Channel ......................55 Live Popup Menu ....................... 56 Backup (Export) ........................ 57 Manual Export ......................57 Auto Backup ......................58 Play Back Backup Image ....................
- Page 14 Contents Firmware Upgrade ..................74 Search Overview ......................75 Play Controls ...................... 76 Performing a Basic Search ................76 Adjust the Brightness of an Image ..............76 Zooming in on an Image ..................76 Zooming in on a Portion of an Image ..............77 Printing an Image ....................
-
Page 15: Introduction
Preconfigured for continuous recording, with no additional setup required, the Performance Series DVR offers quick search, setup, and backup features. The Honeywell Embedded DVR comes ready for fast and seamless integration within your existing IT infrastructure. The HRDP4F offers unparalleled stability, security, and ease of use in a compact chassis. -
Page 16: Features
Introduction Features The Honeywell Performance Series DVRs include the following features: • 4 Composite Video Input Connectors Compatible with Color (NTSC or PAL) and B&W Video Sources • • Multiple Recording Modes (Manual / Schedule / Event) • Multiple Search Methods (Smart Search, Panorama, Date/Time, Calendar, Event) •... -
Page 17: Ptz Compatibility List
Performance Series DVR User Guide PTZ Compatibility List The Honeywell Performance Series DVRs support a wide selection of PTZ camera protocols: Honeywell MAXPRO HMC-250 Honeywell VCL HSCP Honeywell (GC-655P) Inter-M (VRX-2101) Honeywell (HSD-250) Inter-M (VSD-640) Honeywell (HSD-251) LG (LPT-A100L) American Dynamics... -
Page 18: Quick Start Guide
Introduction Quick Start Guide Turn on the DVR. See the Turning on the DVR section for more details. Log in -- Use the number buttons to enter the password when prompted – The password is <none> – Press ENTER. Complete System Configuration to set up the date, time and system ID. See the System Configuration section for more details. -
Page 19: Installation
Performance Series DVR User Guide Installation Front Panel Controls Adjust PTZ Live Key camera Arrow Buttons Function Key Setup Menu Exit Numeric Keypad Enter USB Ports Backup Mode / PTZ Preset Search Mode Play / Rotate Display PTZ Mode Rec (record) / Lock (logout) ______________________________________________________________________________________________ Document 800-02471 Rev A 02/09... -
Page 20: Rear Panel Connectors
Installation Rear Panel Connectors The rear panel of the DVR contains virtually all of the connectors you will be using. The diagrams below outline the location and description of each connector: AC Power Input Sensor I/O Video In Ports Audio 1-3 & RS485 Main and Spot Monitor Outputs Audio Input / Output VGA Output... -
Page 21: Remote Control
Performance Series DVR User Guide Remote Control Instant Record ID Select* Log Off (Lock) ZOOM FOCUS IRIS PRESE T PTZ Controls Pause Play REPL AY Rewind Fast Forward Arrow Arrow / Panorama Search Arrow Arrow / Smart Search ENTER EXI T Display Options ROTATE ALARM... -
Page 22: Connection Guide
Installation Connection Guide Connecting the Monitor There are two available monitor outputs on the Performance Series DVR. • Composite Monitor output for CCTV monitor – BNC (Marked MAIN) VGA output for VGA monitor – Mini-Sub D15 • Connecting Video Inputs The Performance Series DVR comes with 4 BNC video inputs on the rear of its chassis. -
Page 23: Connecting A Ptz Camera
Performance Series DVR User Guide Connecting a PTZ Camera The RS485 connector can be used to control Pan / Tilt / Zoom (PTZ) cameras. See the PTZ camera manufacturer’s manual for configuring the RS485 connection. Note Use the RS485 connector for external control systems such as a control keyboard. -
Page 24: Connecting To A Relay Output
Installation Connecting to a Relay Output To make connections on the Alarm Connector Strip, press and hold the button and insert the wire into the hole above the button. To disconnect the wire press and hold the button below the wire and pull out. Alarm Out The DVR can activate external devices such as buzzers or lights. -
Page 25: Setup
Performance Series DVR User Guide Setup Setup Menus SETUP MENU NETWORK CONFIGURATION SYSTEM SERIAL CONFIGURATION CAMERA CLIENT CONFIGUR ATION RECORD E-MAIL CONFIGURATION NETWORK INFORMATION SETUP WIZARD Use the setup menus to configure all of the DVR settings, schedule recording, networking and shutdown. Press SETUP on the front of the DVR or remote control to enter the setup menus and log in. -
Page 26: System
Setup System System Configuration SYSTEM CONFIGUR ATION VIDEO FORMAT NTSC LANGUAGE ENGLISH DVR ID DATE FORMAT MM-DD-YYYY DATE 11/06/2006 TIME 10:44:48 TIME ZONE GMT-08:00.. USE DST KEYPAD BEEP AUTO LOG OFF SAVE CANCEL To enter System Configuration, press SETUP on the front of the DVR and press ENTER to select System Configuration. -
Page 27: Setup Wizard
Performance Series DVR User Guide System Configuration Continued USE DST – After completing the Time Zone setup, highlight USE DST and press ENTER to turn Daylight Saving Time ON/OFF. NTP – Highlight NTP (Network Time Protocol) and press ENTER to SYNC the DVR with the Network Time. -
Page 28: Disk Configuration
Setup Disk Configuration Format Shows installed Hard Disk Drives and the status of other attached storage devices. To format a Hard Drive use the arrow keys to select the appropriate device and press ENTER. Select OK to confirm formatting and press ENTER. To format a USB device use the arrow keys to select USB FORMAT and press ENTER. -
Page 29: Overwrite
Performance Series DVR User Guide Overwrite Sets options for overwriting data when the Hard Disk Drive becomes full. DISK CONFIGUR ATION OVERWRITE HDD OVERWRITE ENABLE DISK-FULL WARNING REMAIN TIME 30 MIN USED SPACE DISK-FULL ALARM DISK-FULL BUZZER DISK FULL MESSAGE FORMAT OVERWRITE CHECK... -
Page 30: Smart Check
Setup SMART Check SMART = Self Monitoring Analysis & Reporting Technology. Enable SMART Check to detect signs of HDD failure. DISK CONFIGUR ATION SMART ENABLE SMART ENABLE CHECK INTERVAL 1 HOUR TEMP. THRESHOLD 60 C S.M.A.R.T.WARNING POPUP CHECK NOW HDD INFORMATION FORMAT OVERWRITE CHECK... -
Page 31: User Configuration
Performance Series DVR User Guide User Configuration Use the User Configuration to Add or Delete users. Server Use the Server menu to manage users that access the DVR locally. To add a new user: Select the authorization level to display the names of the users in that level (ADMIN, SUPERUSER, USER) by selecting the user type at the top of the screen and pressing ENTER to cycle to the next level. -
Page 32: Client
Setup Client Use the Client menu to manage users that access the DVR remotely. Remote users must be defined on this page. Only the users defined here can access the DVR remotely. Add up to 18 users in addition to the two Admin users. Up to 4 users can connect simultaneously to the HRDP DVR. -
Page 33: Configuration
Performance Series DVR User Guide Configuration Import and Export current settings. See details in the Save Settings section. Shutdown Use Shutdown to safely shutdown the system. Select SYSTEM > SHUTDOWN. Select OK to confirm and press ENTER to safely shutdown the system. Note Improper shut down of the system can cause data loss and system corruption. -
Page 34: Color Setup (Adjust)
Setup Color Setup (Adjust) COLOR SETUP - LIVE CAMERA LIVE SCREEN MODE BRIGHT CONTRAST SATURATION POSITION APPLY ALL SAVE CANCEL CAMERA – 1 ~ 4 [camera to apply color settings to]. SCREEN MODE – LIVE / RECORD BRIGHT – -25 ~ 25 CONTRAST- -25 ~ 25 SATURATION –... -
Page 35: Spot / Sequence Configuration
Performance Series DVR User Guide Spot / Sequence Configuration SPOT/SEQUENCE CONFIGUR ATION SPOT SEQUENCE CAMERA INTERVAL CURRENT 2 SEC CAM 1 SEQUENCE CAMERA DWELL TIME 2 SEC CUSTOM SELECT SAVE CANCEL Spot SEQUENCE – ON/OFF [Sequence through selected cameras]. CAMERA – Select cameras to include in sequence. INTERVAL –... -
Page 36: Monitor Configuration
Setup Monitor Configuration MONITOR CONFIGURATION DATE/TIME CAMERA LABEL OPTIONS BORDER COLOR BLACK TRANSPARENCY SETUP PRIMARY DISPLAY TYPE VGA RESOLUTION 1024X768 60Hz SCREEN POSITION VGA ADJUSTMENT SAVE CANCEL DATE/TIME – ON/OFF [On-screen Date/Time display]. CAMERA LABEL OPTIONS – ALL / NAME / NUMBER / OFF. BORDER COLOR –... -
Page 37: Record
Performance Series DVR User Guide Record Record Configuration Use Record Configuration to configure the recording schedule and frame capture rate. In Schedule Setup, users can define the recording schedules: • Day • Night • Weekend Frame RECORD CONFIGUR ATION FRAME SIZE R-MODE C-FPS... -
Page 38: Schedule
Setup Schedule RECORD CONFIGUR ATION SCHEDULE FROM NIGHT 00:00:00 00:00:00 WEEKEND INFORMATION BY DEFAULT DAYTIME IS 24/7. TO SET UP A DIFFERENT SCHEDULE FOR NIGHTTIME OR WEEKENDS ADJUST THE NIGHTIME AND WEEKEND OPTIONS ABOVE. FRAME SCHEDULE AUDIO INSTANT SAVE CANCEL NIGHT –... -
Page 39: Instant Recording
Performance Series DVR User Guide Instant Recording Configure the recording settings for Instant Recording to use when it is activated. RECORD CONFIGUR ATION INSTANT RECORDING QUALITY NORMAL SIZE 352X240 FRAME SCHEDULE AUDIO INSTANT SAVE CANCEL FPS – Set the FPS (recording rate per camera). QUALITY –... -
Page 40: Motion/Event Configuration
Setup Motion/Event Configuration Motion / Event Configuration has four sections; Input, Sensor, Action, and Alarm Monitor. When an event comes in (Input) the DVR records the image according to its settings (Camera Configuration) and triggers an alarm (Action). Input MOTION/EVENT CONFIGUR ATION INPUT MOTION SENS... -
Page 41: Setting Up Motion Detection Recording
Performance Series DVR User Guide Setting Up Motion Detection Recording To record data only when motion is detected: MOTION/EVENT CONFIGUR ATION INPUT MOTION SENS AREA SENSOR V-LOSS TEXT-IN NORMAL NORMAL NORMAL NORMAL INPUT SENSOR ACTION ALARM MONITOR SAVE CANCEL Press SETUP on the front of the DVR or remote control. Select RECORD >... -
Page 42: Sensor
Setup Sensor MOTION/EVENT CONFIGUR ATION SENSOR TYPE SIGNAL CLEAR INPUT SENSOR ACTION ALARM MONITOR SAVE CANCEL Sensor Setup Use the arrow buttons to select Sensor 1 and press ENTER to change to N/O (Normally Open) or N/C (Normally Closed). Repeat for all sensors. Select SAVE and press ENTER to save settings and exit Sensor Setup. -
Page 43: Action
Performance Series DVR User Guide Action MOTION/EVENT CONFIGUR ATION ACTION ALARM DELAY DURATION PRESET EVENT POPUP INPUT SENSOR ACTION ALARM MONITOR SAVE CANCEL CH – Channels 1~4 ALARM – OFF / 1[Associate an alarm relay with a channel]. DELAY – 0~100 Seconds [Delay time before relay activates]. DURATION –... -
Page 44: Network
IP address to the DDNS service. This is important if your router is running NAT (Network Address Translation) services for your network. If you are unsure of your network configuration, Honeywell recommends this feature be set to ON. STATUS – Select CHECK to confirm the DDNS settings. -
Page 45: Serial Configuration
Performance Series DVR User Guide Serial Configuration Configure connected serial devices. SERIAL CONFIGUR ATION RS232 TYPE EXTERNAL CONTROLLER MODEL NONE PORT 9600-8N1 RS485 TYPE NONE SAVE CANCEL TYPE – NONE / EXTERNAL CONTROLLER External Controller MODEL – Select appropriate model from the supported list. PORT –... -
Page 46: Client Configuration
Setup Client Configuration Configure general remote access. CLIENT CONFIGUR ATION REMOTE PORT 4000 WEB PORT REMOTE CONFIG ENABLE MAX TRANSFER SPEED 100 Mbps SAVE CANCEL REMOTE PORT – Use this port number when configuring remote access software. The default port is 4000 but can be changed. WEB PORT –... -
Page 47: E-Mail Configuration
Performance Series DVR User Guide E-mail Configuration The DVR can send an email notification to up to six defined e-mail addresses when an event happens. E-MAIL SERVER – DVR/SMTP [Configure the DVR to use selected e-mail server.] SCHEDULE – ON/OFF [Enable to send e-mail notifications only for events that occur within a specified range of time]. -
Page 48: Information
Setup Information System Log View Displays system log information. SYSTEM LOG VIEW BEGIN DATE SYSTEM LOG 0317 07/17 12:00:21 Login Success(ID : root) 0316 07/17 12:00:11 Logout 0315 07/17 10:33:14 Login Success(ID : root) 0314 07/17 10:32:45 Logout 0313 07/17 10:22:41 Login Success(ID : root) 0312 07/17 10:21:12... -
Page 49: Version View
Performance Series DVR User Guide Version View Displays system information and software version information for the DVR. VERSION VIEW VIDEO FORMAT NTSC DVR PROGRAM 2.5.5.H15 PTZ MODULE DRIVER MODULE 7.01-16-N FIRMWARE 6.02.21 MAC ADDRESS 00:19:19:01:04:8D VIDEO MUX 51005.0 VIDEO CODEC 60115.0 VIDEO I/O 40618.0... - Page 50 Setup NOTES: ______________________________________________________________________________________________...
-
Page 51: Operation
Performance Series DVR User Guide Operation Search Searching Recorded Data Search recorded video on the DVR to find a specific time or event. SEARCH MENU EXPRESS SEARCH SEARCH EVENT SEARCH JUMP TO FIRST SAVED DATA JUMP TO LAST SAVED DATA DAY.LIGHT SAVINGS SEARCH TARGET Press SEARCH on the front of the DVR or the remote control to enter Search... -
Page 52: Search Methods
Operation Search Methods Express Search Users can select a specific date and time of recorded data to search. EXPRESS SEARCH DATE 2007 / 7 / 17 2007 / 7 / 16 2007 / 7 / 15 2007 / 7 / 14 2007 / 7 / 13 2007 / 7 / 12 2007 / 7 / 11... -
Page 53: Go To First
Performance Series DVR User Guide Go To First View the earliest recorded data. Go To Last View the most recent recorded data. Go To Jump View video from a 24 hour period. Panorama Search Panorama Search will start searching video from the current frame and play four consecutive frames from the same channel. -
Page 54: Search Details
Operation Search Details In Search Mode users can access the Popup Menu for extended options; see the Popup Menu section. Search Popup Menu Use to access display options in Search Mode. Press ENTER to highlight a channel box. Use the arrow keys to select the desired channel. Press ENTER again to open the Popup Menu. -
Page 55: Monitoring
Performance Series DVR User Guide Monitoring Select Channel • Use the number keys on the front of the DVR or remote control to select specific channels for full screen display. (ex. Press 1 to display channel 1) • Press LIVE to change the display mode. Display switches in the following order when LIVE is pressed successively: •... -
Page 56: Live Popup Menu
Operation Live Popup Menu Use to access display options in Live Mode. Press ENTER to highlight a channel box. Use the arrow keys to select the desired channel. Press ENTER again to open the Popup Menu. HIDE LIVE VIEW – ON/OFF [Hide POPUP MENU 1:1 live display of the selected camera] RECORD CHANGE –... -
Page 57: Backup (Export)
Performance Series DVR User Guide Backup (Export) Manual Export Back up recorded data to a connected USB device. Refer to the list of Approved USB Flash Drives in the Introduction chapter. EXPORT MANUAL EXPORT TYPE MANUAL EXPORT TARGET NONE FROM 07/05/2007 12:55:47 07/17/2007 13:30:03 CHANNEL... -
Page 58: Auto Backup
Auto Backup Create a mirrored backup of recorded data on a connected USB external hard drive. Caution Honeywell recommends the use of hard drives only; the use of flash drives is not recommended for auto backup. EXPORT AUTO USB EXPORT... -
Page 59: Play Back Backup Image
Performance Series DVR User Guide Play Back Backup Image Play recorded video on a PC using the proprietary media player included with every backup file. Insert CD, DVD or connect external USB device to the PC. Navigate to the files on the CD, DVD, or USB drive. Double-click the DvrPlay application. -
Page 60: Save Settings
Operation Save Settings Use the System Configuration menu to export and import saved or factory default system settings. CONFIGURATION PROFILE LOAD SAVE SAVE DATE DEFAULT LOAD SAVE NONE NONE LOAD SAVE NONE NONE LOAD SAVE NONE NONE LOAD SAVE NONE NONE LOAD SAVE... -
Page 61: Ptz Camera Control
Performance Series DVR User Guide PTZ Camera Control To control a PTZ camera: Press the PTZ key to enter PTZ Mode. Press SETUP to open the PTZ SETUP screen. PTZ SETUP CH1 SPEED SETUP PRESET SETUP PRESET TOUR PATTERN SETUP PATTERN TOUR AUTO FOCUS POWER... - Page 62 Operation NOTES: ______________________________________________________________________________________________...
-
Page 63: Remote Software
Performance Series DVR User Guide Remote Software Set Up a Remote Connection The administrator and up to eighteen additional users (four simultaneously) can access the DVR remotely using software installed on a personal computer. Configuring the DVR Press SETUP on the front of the DVR or remote control to log in. Select NETWORK >... -
Page 64: Creating A Dvr Connection With Remote Software
Remote Software Configuring the DVR continued 10. Go to SYSTEM > USER CONFIGURATION > CLIENT to add remote users. Note Only users defined in SYSTEM > USER CONFIGURATION > CLIENT will be able to access the system remotely. 11. Select SAVE to save current settings. Creating a DVR Connection with Remote Software Install the Remote Software on a PC using the disc provided with your DVR. -
Page 65: Access Remote Connection
Performance Series DVR User Guide Access Remote Connection Open the Remote Software. Click on the icon of the server as defined previously. Enter the user name and password of an authorized remote user as defined in the System > User Configuration > Client menu on the DVR. Note User Name and Password are both case sensitive. -
Page 66: Using The Remote Software
Remote Software Using the Remote Software Setting the Time and Date The Remote Software uses the system time of the PC. If the system time is not correct, follow the steps below to change it. Exit to Windows by clicking the EXIT button on the Live View screen and selecting Restart in Windows Mode. -
Page 67: Live View Screen
Performance Series DVR User Guide Live View Screen Each time the software is restarted, the program defaults to the Live View screen. The following diagram outlines the buttons and features used on the Live View screen. It is important to be familiar with these options as this is the screen displayed the majority of the time. -
Page 68: Camera View
Remote Software Camera View The Camera status for each camera is displayed on the upper right corner of the video display area. Current Recording Status Special Recording Status Camera No. and Name Recording Status Indicator The following are the different states for each camera: Recording Displayed when the camera is currently being recorded to the DVR. -
Page 69: Screen Division Buttons
Performance Series DVR User Guide Screen Division Buttons The Screen Division buttons allow you to view cameras in groups such as two by two, three by three and four by four. The button options are shown below. 1st Four Cameras View – Displays cameras 1-4 in the Video Display Area. -
Page 70: Setup Overview
Remote Software Setup Overview Setup Screen Overview Ensure the tree is expanded on the left menu to display the Camera, Record and Sensor Setup options. Most of the setup options are the same in both the remote software and in the E480 system. Click APPLY after changing any settings. -
Page 71: Spot Setup
Performance Series DVR User Guide SPOT Setup The SPOT Setup display allows the user to define the sequence display for the Spot Monitor. This allows the Spot Monitor to display only the video necessary for the person watching the Spot Monitor. Sequence –... -
Page 72: Audio Setup
Remote Software Audio Setup Specify volume level and audio settings for recording according to preset schedules and live or playback mode. Audio Day – ENABLE/DISABLE Audio Night – ENABLE/DISABLE Audio Weekend – ENABLE/DISABLE Audio Live – ENABLE/DISABLE Audio Playback – ENABLE/DISABLE Volume –... -
Page 73: Hdd Setup
Performance Series DVR User Guide HDD Setup Disk Overwrite – ENABLE / DISABLE [Select the check box to enable the DVR to write over old data when the hard drive is full]. Disk Full Warning – ENABLE/DISABLE [Enable Disk Full Warning for notification when the HDD becomes full and HDD Overwrite is disabled]. -
Page 74: System Setup
Remote Software System Setup User Management ID – Type a new user name. (Available for user1 through user18.) Password – Type a password for each user. Permissions – ENABLE / DISABLE Live Playback Backup Health Live Authorization – Enable live access for specific channels. PTZ Authorization –... -
Page 75: Search Overview
Performance Series DVR User Guide Search Overview Actual Date/Time Search Options Play Controls Screen Division Buttons Search Date/Time Hour Minute Control Select Cameras Calendar Button Note Audio Channel buttons are only viewable when one camera is selected. ______________________________________________________________________________________________ Document 800-02471 Rev A 02/09... -
Page 76: Play Controls
Remote Software Play Controls Stop Rewind Play Forward Frame Back Frame Back Frame Moves video back one frame Rewind Rewinds video Stop Stops video playback Play Plays video Forward Frame Moves video forward one frame Performing a Basic Search Select a date using the Calendar button on the Date Display. Select a time using the hour and minute control bars. -
Page 77: Zooming In On A Portion Of An Image
Performance Series DVR User Guide Zooming in on a Portion of an Image Using the mouse pointer, point to the area of interest on the image and click the right mouse button. Keep clicking the right mouse button to zoom in further. Continue clicking the right mouse button and the image zoom will cycle back to the original size. -
Page 78: Saving A Video Clip
Remote Software Saving a Video Clip Perform a basic search to locate the desired clip. Click Save to open the Export Wizard. Click JPEG or AVI to select the desired file type. AVI File Select Mark Digital Signature. Select an Audio Channel if available. -
Page 79: Status Search
Performance Series DVR User Guide Status Search The Status Search option displays a timeline in graph format. Scroll through multiple cameras and easily locate hours with recorded video. 24 Hours (0-23) AM & PM Cameras Recorded video displayed in Orange Performing a Status Search In Search mode, click Status. -
Page 80: Ptz Overview
Remote Software PTZ Overview Accessing PTZ Menus Click PAN/TILT on the remote software Live View screen to open the graphical PTZ controller. Some protocols support the ability to access the Internal PTZ Onscreen Menu. Since every PTZ camera is different, the functions of these options can vary slightly. -
Page 81: Using The Graphical Ptz Controller
Performance Series DVR User Guide Using the Graphical PTZ Controller • Use the Arrow buttons to control the direction of the PTZ camera. • To select a new camera, click the video display of a different camera on the Live View screen. Arrow Buttons Current Camera... -
Page 82: Using The On-Screen Compass
Remote Software Using the On-screen Compass Click PAN/TILT on the Live View screen. Control the PTZ by dragging the mouse on the screen in the desired direction. A green line will appear to show the direction the PTZ will move. The shorter the line the less the PTZ will move. -
Page 83: Fvms (Option) Overview
Performance Series DVR User Guide FVMS (option) Overview Connecting to a DVR using FVMS FVMS (software part number HFVMSP) is available as an optional accessory for HRDP. FVMS software is Multi-Site Management Software; a powerful utility that allows 100 or more DVRs to be controlled using one computer. This software allows you to view live video, search saved video, edit and configure setup on each DVR, and import maps of buildings and other locations. -
Page 84: Connecting To A Dvr Using Web Viewer
Remote Software Connecting to a DVR Using Web Viewer Open Microsoft Internet Explorer. Enter the IP address of the DVR into the Address bar. When attempting this for the first time you will be asked to accept an Active X installation. Click Yes. Note If you receive a message saying Internet Explorer security settings do not allow you to download Active X components then you will need to... -
Page 85: Digital Verifier Overview
Performance Series DVR User Guide Digital Verifier Overview JPG images and AVI video files that are exported from the Digital Video Recorder are automatically embedded with a digital signature. Digital signatures are a way to verify the authenticity of the images to ensure that they have not been tampered with or edited in any way. - Page 86 Remote Software Notes ______________________________________________________________________________________________...
-
Page 87: Appendix
Performance Series DVR User Guide Appendix Screen Icon Index Recording Icons Recording icons appear in the upper-right corner of each channel display. Motion Motion Recording Icon Sensor Sensor (Alarm) Recording Icon Continuous Continuous Recording Icon Recording Recording Icon This icon always appears in conjunction with the motion or continuous recording icons. -
Page 88: Status Icons
Appendix Status Icons Status icons appear in the upper left corner of each channel display. Channel Channel number Channel User defined channel name Name Search Icons Search icons appear in the upper right of each channel display. Play Playback mode Pause Pause search video Smart... -
Page 89: Numeric Buttons
Performance Series DVR User Guide Numeric Buttons Numeric In live and search modes, press to watch that channel full screen. Function Buttons FUNCTION Access secondary button functions contained in parentheses. LIVE Switch to Live view ZOOM/ Access the Zoom/Iris/Focus options of a PTZ IRIS/ camera. -
Page 90: Directional And Playback Control Buttons
Appendix Function Buttons continued Force continuous instant recording. LOCK Log out the current user. Use to prevent accidental or unauthorized system-wide changes. SETUP Open the Setup menu. Directional and Playback Control Buttons Live Go to PTZ mode. Search When pressed successively, the fast reverse rate increases. -
Page 91: Dvr Faq
Performance Series DVR User Guide Navigation Move to the right. The camera view moves to the right. Search Play forward or pause recorded videos Navigation Move down. The camera view moves downward. Search Start or stop Smart Search. Navigation Move to the left. The camera view moves to the left Search Play in reverse or pause recorded videos. -
Page 92: Recording
Mail is not sent out. Please check all the settings in the Network E-Mail Configuration. Miscellaneous What types of cameras can be used? The Honeywell Performance Series DVR supports either NTSC or PAL analog cameras. Both standards may not be used simultaneously. ______________________________________________________________________________________________... -
Page 93: Troubleshooting
Performance Series DVR User Guide Troubleshooting Problem Possible Solutions Check the power cord connections No Power Check power at the outlet Check camera video cable and connections Check monitor video cable and connections No Live Video Check camera power Check camera lens setting If a cable is attached to the video channels looping Live Video Too Bright output, make sure that it is properly terminated. - Page 94 Appendix Notes ______________________________________________________________________________________________...
-
Page 95: Specifications (Hrdp4F)
Performance Series DVR User Guide Specifications (HRDP4F) Specification 4 Channel Inputs 4 Channel Composite CCTV Monitor (NTSC/PAL), Video CRT(VGA) Monitor Outputs 1 Spot CCTV Monitor (NTSC/PAL) NTSC : 120 fps Display PAL : 100 fps Monitoring Screen split NTSC: CIF(120 fps), 2CIF(60 fps), 4CIF (30 fps) Performance PAL: CIF(100 fps), 2CIF (50 fps), 4CIF(25 fps) NTSC: CIF(352x240), 2CIF(704x240), 4CIF (704x480) PAL: CIF(352x288),... - Page 96 Document 800-02471 Rev A– 02/09 © 2009 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects.