Table of Contents
Advertisement
Go to "Task 10: Creating Logical Drives with ASUS Storage Management" on
page 39
Setting up with the LCD
The LCD Panel displays the current IP address during normal operation. If you
did not install the LCD Panel, see "Task 2: Installing the LCD Panel (Optional)" on
page 5. The LCD does not have a date and time function.
Figure 26. LCD Panel default view
Making Manual IP Settings
To make Management Port settings manually:
1.
Press the
2.
Press the
If it says Link Status Down, reconnect to the network before preceding.
3.
Press the
4.
Press the
The current IP Address displays with the cursor under the first (extreme left)
digit.
5.
Press the
Press the
To set an IP address with double- or single-digit octets, for example,
192.168.1.50, type zeros as placeholders, 192.168.001.050.
After you have set the last (extreme right) digit, press the
The current Subnet Mask displays with the cursor under the first (extreme
left) digit.
6.
Make the needed changes the same as in step 5.
After you have set the last (extreme right) digit, press the
The current Gateway displays with the cursor under the first (extreme left)
digit.
or
button until the display says Management Port.
button and the display says Link Status Up.
or
button and the display says IP Address.
button to make a change.
button to increment and the
button to move left and the
Task 9: Setting the IP Address
button decrement.
button to move right.
37
button.
button.
Advertisement
Table of Contents
