Table of Contents
Advertisement
Click on Details, change the Filter from Patterns to Package Groups.
10.
Select the Source under Development in left window and check kernel-
11.
source in the right window to add the kernel source.
Click on Accept and continue the installation.
12.
Follow the instruction to complete the installation.
13.
If you have installed the ATI FireGL V5200 in the system, the system
14.
CANNOT boot into X-window after OS installation completed. You need
reboot the system into text and install the driver for ATI FireGL V5200 first.
Please refer to VGA driver installation (ATI FireGL V5200) section for how
to install the driver.
VGA Driver Installation (ATI FireGL V5200)
The ATI FireGL V5200 driver installation is the same as LSI MegaRAID SAS
8708ELP installed. Please refer to the SUSE Linux Enterprise Server 10
Installation (with LSI MegaRAID SAS 8708ELP) VGA Driver Installation (ATI
FireGL V5200) section.
Gigabit Ethernet Driver Installation
The NIC driver installation is the same as LSI MegaRAID SAS 8708ELP installed.
Please refer to the SuSE Linux Enterprise Linux 10 Installation (with LSI
MegaRAID SAS 8708ELP) Gigabit Ethernet Driver Installation section.
MeagRAID Storage Manager Installation
The MegaRAID Storage Manager installation is the same as LSI MegaRAID SAS
8708ELP installed. Please refer to the SuSE Linux Enterprise Linux 10 Installation
(with LSI MegaRAID SAS 8708ELP) MegaRAID Storage Manager Installation
section.
SUSE Linux Enterprise Server 10 Installation (with onboard SATA
RAID)
Below information describes how to manually install SUSE Linux Enterprise
Server 10 on Altos G5450 with onboard SATA RAID.
Drivers Required
For SUSE Linux Enterprise Server 10 Installation, the following device drivers are
required.
Device
Onboard SATA
RAID
Onboard NVIDIA
NFP 3600 Chipset
Onboard NVIDIA
nForce Networking
89
Version
Directory on EasyBUILD
N/A
N/A
N/A
OS built-in
0.60
\Disk\g5450\nic\Nvidia\sles10\
Altos G5450 Installation Configuration Guide
Advertisement
Table of Contents
