Cisco WS-C3550-12G User Manual page 70
User guide
Hide thumbs
Also See for WS-C3550-12G:
- Software configuration manual (798 pages) ,
- Manual (278 pages) ,
- Datasheet (19 pages)
Table of Contents
Advertisement
Manually Deploying Network Objects
Network Element with IOS/CatOS installed (Specific Chassis)
•
Network Element with CatOS installed (Auto–discover Chassis)
•
•
Network Element with CatOS installed (Specific Chassis)
The following deployment templates display in the Deployment Wizard—Templates window when the
Catalyst 2950, 3550, 4000 or 4500 chassis deployment option is selected:
•
Network Element (Auto–discover Chassis)
•
Network Element (Specific Chassis)
Deployment templates are available for the following types of deployment:
Auto–discover Chassis—Deploys the Network Element and Software objects within the EMS and
•
automatically commissions these objects to automatically populate the Network Element object
through chassis and subchassis discovery. The discovery process creates objects representing the
Chassis and all subchassis elements within the physical switch at the time of discovery.
•
Specific Chassis—Deploys the Network Element, Chassis, and Software objects. Used when you
want to perform predeployment operations.
Tip
The Specific Chassis option is most commonly used when predeploying network elements. For further
information on predeploying objects, refer to
Furthermore, deploying a Catalyst 6000 or 6500 chassis through the Deployment Wizard templates
provides templates appropriate to the type of software installed on the switch itself:
IOS—Native IOS–based switch
•
•
IOS/CatOs—Hybrid–based switch where both Native IOS and Catalyst IOS software is utilized
•
CatOs—Catalyst IOS–based switch
Step 2
Choose the appropriate deployment template option from the list and click Forward.
The Deployment Wizard—Object Parameters window (1) appears.
You can deploy multiple switches at a time using the same deployment template.
If you opt to deploy more than one switch, the Deployment Wizard displays each of the resulting screens
for each switch to be deployed.
Enter the number of switches that you want to deploy using this template in the provided field, then click
Step 3
Forward.
The Deployment Wizard—Object Parameters window (2) appears. Depending on the deployment
template selected in
Step 4
Provide data in the Object Parameter fields as applicable per the following descriptions.
Catalyst Switch Name—Name of the Network Element object to be displayed in the Map Viewer
•
application
Supervisor IP Address—IP address of the switch
•
SNMP V2c Read Community—SNMP v1 read community used by the device
•
SNMP V2c Write Community—SNMP v1 write community used by the device
•
Cisco Catalyst Switch Manager User Guide
4-10
Predeploying Anticipated Network
Step
2, the fields on the Deployment Wizard—Object Parameters window (2) vary.
Chapter 4
Deploying the Cisco Catalyst Switch Manager
Objects.
OL-4930-01
Advertisement
Table of Contents
Troubleshooting
